|
| 1 | Demolishing brick works including stacking of serviceable materials and disposal of unserviceable materials with in 50 mtr lead in cement mortar |
| 2 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 3 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc.including dismembering and stacking within 50 metres lead. |
| 4 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 5 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area |
| 6 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats. |
| 9 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil |
| 10 | Brick work with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | 12 mm cement plaster; 1:6 (1 cement: 6 fine sand) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 13 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform ,Shelves (Cast in situ) |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level : Cold twisted bars |
| 17 | Supply of labour for placing the Cast in situ drain covers at its required position and other emergent works. |
| 18 | Taking down carefully old electric point wiring, sub main , switch board, Power point all electric fitting & fixture etc from ACSC Lab Lab and shifting of old materials with CBRI (Central Store )as required and directed by engineer-incharge. |
| 19 | Wiring for light Point /fan point /exhaust fan /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch of ISI marked, modular plate suitable G.I Box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable including ceiling rose etc as required. Group c |
| 20 | Wiring for circuit /sub-main wiring along with earthwire with the following size of FRLS PVC Insulated copper conductor single core cable of ISI Marked in surface/ recessed steel conduit as required |
| 21 | 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire |
| 22 | 2 x 2.5 sqmm + 1 x 2.5 sqmm earth wire |
| 23 | 2 x 4 sq mm + 1 x 4 sq mm earth wire |
| 24 | 4 x 6 sq mm + 2 x 6 sq mm earth wire |
| 25 | Supplying & Fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate. As required. |
| 26 | Supplying & Fixing Suitable size GI box with modular plate and cover in front on surface or in recess , including providing & Fixing 6pin 5/6 and 15/16 A modular socket outlet and 15/16A modular switch of ISI marked , connections etc as required. |
| 27 | Supplying and Fixing 30A, 415V ,TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30A \\"C\\" curve, TP,MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Please Enable Macros to View BoQ information |
