|
| 1 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 2 | Group C |
| 3 | (Make:-FINOLEX,Anchor,Plaza) Legrand (Myrius), L&T(Entice), Anchor (Roma plus). |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 5 | 2x1.5 sq.mm |
| 6 | 2x4 sq.mm |
| 7 | Make:- FINOLEX/Anchor/Plaza |
| 8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 9 | 3x1.5 Sq. mm. |
| 10 | Make:- FINOLEX/Anchor/Plaza |
| 11 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 12 | 5/6 Amps one way Modular switch. |
| 13 | 6 pin, 5/6 Amps Modular socket outlet. |
| 14 | S.P. 15/16 Amps one way Modular switch. |
| 15 | 6 pin, 15/16 Amps Modular socket outlet. |
| 16 | Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- |
| 17 | 2 modules |
| 18 | 4 modules |
| 19 | 8 modules |
| 20 | Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 21 | Single pole |
| 22 | Makes:- L&T/Legrand/Schneider. |
| 23 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | 63 Amps |
| 25 | Makes:- L&T/Legrand/Schneider. |
| 26 | Providing, Installation, testing and commissioning of BLDC ceiling fan (5 star rating), including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: |
| 27 | BLDC Ceiling Fan 1200 mm sweep |
| 28 | Makes:- Usha/Bajaj/Havella |
| 29 | Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: |
| 30 | Exhaust Fan, Light duty, (Domestic) |
| 31 | Makes:- Usha/Bajaj/Crompton |
| 32 | Supplying and fixing two module stepped type electronic fan regulator on theexisting modular plate switch box including connections but excluding modularplate etc. as required. |
| 33 | Fan Regulator |
| 34 | Providing and fixing of LED batten having minimum efficacy of 100 Im/W, P.F.>0.95 with THD<10%, CCT 6500 K,CRI 80, Surge Protection range 2 kV. The LED with useful life of 50000 Hrs. at L70 with five years warranty. The Input voltage shall be 150V to 270V, 50/60 HZ along with all accessories, including connections, testing etc. as required complete in all respects. |
| 35 | LED Batten 20 Watt |
| 36 | Makes:- Havells/Bajaj/Crompton |
| 37 | Providing and Fixing of LED fixture 600mmX600mm 36 Watt +/- 1W Recess mounted fixture with HET Plastic diffuser with minimum system lumen efficacy of 100 lm/W with CRCA housing having P.F.>0.95 with THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. |
| 38 | LED Panel 2'x2' 36 watt |
| 39 | Makes:- Panasonic/Wipro/Havells |
| 40 | Providing and fixing of LED fixture 600mm x 600mm 36Watt +/- 1W surface mounted having minimum system lumen efficacy of 100lm/W with with CRCA housing and PMMA diffuser with P.F. >0.95, THD<10%, CCT 5700K, CRI 80. The LED shall be tested with LM80-08 standard with useful life of 50000 hrs. at L70. The input voltage range shall be 150V as required complete with connections, testing etc. |
| 41 | LED Panel 2'x2' 36 watt Surface |
| 42 | Makes:- Panasonic/Wipro/Havells |
| 43 | Providing and fixing of LED fixture 18Watt +/- 1W recess mounted having minimum system lumen efficacy of 100lm/W with with CRCA housing and PMMA diffuser with P.F. >0.95, THD<10%, CCT 5700K, CRI 80. The LED shall be tested with LM80-08 standard with useful life of 50000 hrs. at L70. The input voltage range shall be 150V as required complete with connections, testing etc. with 5 years warrenty period. |
| 44 | 18 Watt LED Surface panel |
| 45 | Makes:- Panasonic/Havells/Bajaj Please Enable Macros to View BoQ information |
