|
| 1 | Demolition of cement Concrete (unreinforced) in ground floors and paving's not exceeding 15 cm thickness (below or above ground level) and remove rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for 100mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate as in sub base of floor or similar work complete all as specified and directed. |
| 3 | M&L coloured and polished chequered cement concrete tiles 20cm x 20cm x 25mm/30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 4 | M&L for 75mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate as in plinth/hard standing, finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for 25mm thick PCC 1:2:4, type B0 using 12.5mm graded stone aggregate as in sub base for flooring/levelling coarse, sunken floor etc complete all as specified and directed. |
| 6 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed. |
| 7 | M&L for non-skid/mat finish ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exisitng including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 8 | M&L for glazed ceramic coloured tiles 300x 200x 7mm/ 450x 300x 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the existing over 10mm thick backing in CM 1:3 complete all as specified and directed. |
| 9 | M&L for non - skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 10 | M&L for non - skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 11 | All as per item ser No 10 here-in-before but as in vertical surface (dado/Skirting) to match the shade of floor tiles laid and backing coat in CM 1:3, 10mm thick on wall complete all as specified and directed. |
| 12 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 13 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 14 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed |
| 15 | S&F in repairs Wash down Vitreous China wash down water closet pan 'S' and 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black or white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including provision of lime concrete bedding complete all as specified and directed. |
| 16 | S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 17 | S&F in repairs 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets High or low level fluslhing cistern and connections to pipes and fixing of chain and pull, or lever including all connected items complete all as specified and directed. |
| 18 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube in Chrome Finish and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 19 | S&F in repairs stop valves 15 mm bore dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 20 | All as per item ser No 19 here-in-before but chromium plated with long shank and cup (concealed type) complete all as specified and directed. |
| 21 | S&F looking mirror, size 600mmx450mm, beveled edge, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 22 | S&F in repairs PVC connections 15mm size with 02 Nos brass check nuts with washer of length 600mm complete all as specified and directed. |
| 23 | S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm including cutting for and pinning in ends of brackets or erecting stand and connected fittings including PVC connections 15/20mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 24 | S&F in repairs waste fittings brass chromium plated 32 mm mm dia for wash hand basin, glazed ware sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. |
| 25 | S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 26 | S&F in repairs bib tap of size 15mm bore dia, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 27 | Demolition and breaking up drain pipes of dia 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including necessary bend, T and other accessories complete all as specified and directed. |
| 28 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints and fittings laid in trenches or in floors including necessary clamps etc complete all as specified and directed |
| 29 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints and fittings laid in trenches or in floors including necessary clamps etc complete all as specified and directed |
| 30 | S&F in repairs PVC (SWR) floor trap, outlet 75 mm dia, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed. |
| 31 | S&F 15mm bore high pressure unplasticised PVC pipes of pressure rating 10 kgf/cm2 including UPVC fittings (bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, bushes, reducers and plugs, etc.) as in walls/ceiling or in floors (upto four storey building) , complete all as specified and directed. |
| 32 | S&F 20mm bore high pressure unplasticised PVC pipes of pressure rating 10 kgf/cm2 including UPVC fittings (bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, bushes, reducers and plugs, etc.) as in walls/ceiling or in floors (upto four storey building) , complete all as specified and directed. |
| 33 | S&F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel/ pvc pipe or union complete all as specified and directed. |
| 34 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) orinsulation boards/slabs/blankets, any thickness, including cover fillets and damaged existing aluminium snap grid frame work complete all as specified and directed |
| 35 | S&F anodised aluminium snap grid frame work (size of grid 605x605 mm) with 35x25x1.5 mm main tee and 25x25x1.4 mm cross tee and wall angle for false ceiling complete all as specified and directed. |
| 36 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 37 | M&L for 4 mm thickness non-asbestos fibre cement building boards (decorative type) fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed. |
| 38 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 39 | S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 40 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 41 | M&L for preparation of old plastered or unplastered surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on wall surfaces complete all as specified and directed. |
| 42 | M&L for preparation of old plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed. |
| 43 | M&L for preparation of old plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on celing surfaces complete all as specified and directed. |
| 44 | M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 45 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | M&L for preparation of old surface of walls and applying one coat of Exterior Emulsion paint (Water proofing Paint) all as per manufactures instructions and specified. |
| 47 | M&L for complete removal of existing treatment on walls, roof projections, including fascia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (as per manufacturer's instructions) etc complete all as specified and directed. |
| 48 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 49 | M&L for rendering 15mm thick with cement mortar (5mm thick in CM 1:4 over a backing coat of 10mm thick in CM 1:6) mixed with water proofing compound @ 3% by the weight of cement on fair faces of brick/concrete work in external surfaces of wall finished even and smooth (without using extra cement) complete all as specified and directed. Note: Water proofing compound will be measured and paid separately. |
| 50 | Supply only integral water proofing compound. |
| 51 | M&L preparation of new plastered or unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces (as per manufacturer's instructions) etc complete all as specified and directed. |
| 52 | M&L for writing letters or figures (Block. Roman, Italic or Indian) not exceeding 30 cm high including repainting on back ground in black colour complete all as specified and directed. |
| 53 | Cutting/ cleaning small trees, saplings, shrubs and under growth complete roots from brick walls, chajjas etc including taking out complete roots from inside walls/ chajjas and making good surfaces in cement concrete 1:2:4 type B1 or in cement mortar (1:4) to match the existing surfaces upto four storey building complete all as specified and directed . Please Enable Macros to View BoQ information |
