|
| 1 | (Supply Part) - 2 Nos. 630 KVA 11/0.4KV Sub-Station |
| 2 | Prov. 11 KV CT-PT unit outdoor type , PT(1 Unit , 11 KV/110 V):CT:10-400/5A) |
| 3 | Prov. 3-Phase 3/4 wire CT-PT Operated static trivector meter (DLMS Complaint) 400/5A |
| 4 | i) PVC Multistrand 4 sqr mm copper wire |
| 5 | ii) 1 inch dia GI pipe for concealing |
| 6 | iii) bend joints/ elbow |
| 7 | Prov. 630 KVA , 11/0.4 KV Transformer |
| 8 | Prov. Energy Meter (3-Phase 4-Wire)DLMS complaint 400/5 A CT Type |
| 9 | Prov. S/T Pole 9 Mtr. Long |
| 10 | Prov. RCC Muff with C:C filling 2000 mm length |
| 11 | Prov. M.S.C.I. X-Arm (100x50x6 mm),Length 2800 mm X 2 Nos. For incomer line |
| 12 | Prov. M.S. Angle Iron (50X50X6 mm), Length: 2800 X 1 Nos. For LA's |
| 13 | Prov. C.I. X-Arm (75X40x6 mm) length 2800 mm X 4 Nos. for supporting DO Fuse Unit & G O ABSwitch |
| 14 | CT-PT Belting & Knee Bracing Prov. M.S.C.I. X-Arm (100x50x6 mm),Length 2800 mm X 4 Nos. For CT/PT |
| 15 | Prov. C.I. X-Arm (100X50x6 mm) length 460 mm X 2 Nos. for supporting Main Channel of transformer. |
| 16 | Prov. M.S. A.I X Arm (50x50x6mm) Length 2800 mm 2 Nos. |
| 17 | M.S. Angle Iron (35X35X5 mm), Length: 460 X 2 Nos. |
| 18 | M.S Angle Iron (50*50*6 mm) lenght:(950 mm) x 2 No.'s for Bed Knee Bracing |
| 19 | Transformer LT Distribution Box and G.O Switch Fixing Aassembly M.S. Angle Iron (50X50X6 mm), Length: 2800 X 2 Nos. |
| 20 | M.S. Angle Iron (50x50x6mm), Length: 450 X 1 Nos. |
| 21 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
| 22 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
| 23 | D.O Fuse Unit |
| 24 | Surge Arrester, 9 kV Station Class (Porcelain Type) |
| 25 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 26 | Stay set complete |
| 27 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
| 28 | Pipe Earthing Set |
| 29 | Prov. GI wire 6 SWG for earthing |
| 30 | Prov. ACSR 6/1/4.72 Sqr mm |
| 31 | Prov. LT Distribution box for 630 KVA DTR of MS Sheet of 1.6 mm ( 1800x1000x700 mm ) cubide Box complete with stand etc and Al Busbar inside .painted /powder coated after primar coating with ACB (Fitted with Bakelite sheet ,1000 Amp Copper thimble ACB 1000 amp 3P 50kA -1 No., Make L&T,Schneider,Havells,ABB or equivalent, MCCB 400 Amp 50 kA 3P of L&T Schneider, ABB,Havalle or equivalent make -3 Nos ) |
| 32 | Half Clamp (M.S. Flat 50X6 mm) |
| 33 | Full Clamps (M.S. Flat 50X6 mm) |
| 34 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16mm Φ or more (with flat and spring washers)] |
| 35 | Aluminium Thimble |
| 36 | Copper Thimble |
| 37 | Danger Plate |
| 38 | Barbed Wire |
| 39 | Prov. LT XLPE Cable (3.5 Core)95 mm2 |
| 40 | Prov. LT XLPE Cable (3.5 Core) 500 mm2 |
| 41 | Prov. Aluminium Paint. |
| 42 | Prov. Red oxide |
| 43 | LT Capacitors Bank 415A, 216 KVAr for 630KVA |
| 44 | Providing Dell/HP AIO Desktop with: Intel Core i5-14500T-14th Gen Processor, 8GB DDR4 RAM expandable upto 16GB 512GB SSD, 23\\" LED Color display with FHD (1920×1080) Integrated HD Graphic & webcam, 2xUSB 3.0, 2xUSB 2.0, Audio jack/ VGA/ HDMI/ DP port, 10/100/1000m IPV6 compliant LAN, USB Keyboard & Mouse, internal speaker, 1x802.11b/g/n/ac, PL-Windows10 Pro 64bit O.S |
| 45 | Prov. HP Monochrome Multi Function Laser Printer HP Laser MFP 1188A Printer – A4 Size Paper, Printing Speed 20PPM, Resolution 1200Dpi, Memory 128MB, Copy Speed (Mono) 20CPM, Scan speed Black and Color 6PPM & 3PPM, USB 2.0, Paper Tray Capacity 150 pages. |
| 46 | Geonix UPS 1000VA/600W |
| 47 | Transportation Charges |
| 48 | (Supply Part) of 11 KV H.T. Line |
| 49 | Prov. Steel Tubular Pole 9.00 mtr long |
| 50 | Prov. RCC Muff with Concrete Filling 2000mm length. |
| 51 | Prov. AAAC Cond.7/3.15 mm2 (50 sqr mm ) |
| 52 | Prov. G.I.No. 6/ 8 SWG for Earth wire for PCC & S/T Pole( including for guarding) |
| 53 | Prov. 11 KV Pin Insulator with Pin Hellically formed fitting (Porcelain, 12kV, 10kN) |
| 54 | Prov. 11 KV Disc Insulator Set Cleaves & Toungue Hellically formed fitting (Porcelain, BS, 12kV, 90kN) |
| 55 | Prov. C.I. X-arm(75x40x6mm),Length: 2800 mm for D.Pole Str. GO Switch & Do Fuse |
| 56 | Prov. C.I. X-arm(100x50x5mm),Length: 2800 mm for D.Pole Str. |
| 57 | Prov. A.I.X-arm(50x50x6mm), Length : 3000 mm.for Gaurding |
| 58 | Prov. Belt Set (X-Bracing Set)M S A. Iron (50x50x6mm) Length:1800*2 mm |
| 59 | Prov. Belt Set (X-Bracing Set)M S A. Iron(50x50x6mm) Length: 2700x2 mm |
| 60 | Prov. G.O Switch Handle Suppourting channel 75*40*6 Length 460 mm |
| 61 | Prov. Stay Set Complete in all respect i/c Guy Assembly with Helically Fitting |
| 62 | Prov. Stay Wire 7/3.15 mm/ 7.400 mm ( @ 6.0 KG /9.00 Kg per Stay Set) |
| 63 | Prov. H.T. Earthing for PCC /S/T Pole |
| 64 | Prov. Full Clamp with nuts & bolts M.S. Flat 50x6 mm |
| 65 | Prov. Half Clamp with nuts & bolts M.S. Flat 50x6 mm |
| 66 | Prov. Earth Hook for Earth Wire |
| 67 | Prov. Danger Plate (250x200x1.6 mm) |
| 68 | Prov. Nuts & Bolts Of various sizes ( Gaivanised/ Coated) ( Preferably 16 mmɸ or more with flat and spring washers) |
| 69 | Prov. Barbed Wire |
| 70 | Prov. Alluminium Paint |
| 71 | Prov. Red oxide |
| 72 | Prov. 11 KV D.O. Fuse |
| 73 | Prov. 11 KV G.O. AB Switch Unit (11 KV, 400A, 25 KA |
| 74 | Providing Fault Path Indicator at various spur of 11 KV line |
| 75 | Transportation charges |
| 76 | (Erection Part ) - 2 Nos. 630KVA 11/0.4KV Sub-Station |
| 77 | Erection of 630 Kva,11/0.4KV Transformer completed in all respect. |
| 78 | Erection of CT-PT Combined Unit Complete in all respect |
| 79 | Loading Un-laoading of 400 Kva,11/0.4KV Transformer with Hydra completed in all respect. |
| 80 | (Erection Part) ) of 11 KV H.T. Line |
| 81 | Add Erection Charges for Tri Pole Structure |
| 82 | Add Erection Charges for For Tapping Pole Structure ( Single pole ) |
| 83 | Add Erection Charges for Erection/filling of Earthing Set |
| 84 | Add Erection Charges for Stay set H.T. comp. |
| 85 | Add Erection Charges Laying of conductor,Stringing & Sagging of conductor & binding with insulator single ACSR/AAAC (50mm2) as per cost Data 2025-26. ( single conductor P/ Km) |
| 86 | Add Erection Charges Stringing,sagging & binding with insulator of GI wire ( single conductor P/ Km) |
| 87 | Add Erection Charges for G.O Switch / DO Fuse |
| 88 | CIVIL PART (DTR foundation & chain link fencing of existing 2 No. 11/0.4 kV, 630 KVA distribution transformer |
| 89 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 90 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) |
| 91 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. |
| 92 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 93 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 94 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 95 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 96 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm |
| 97 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm |
| 98 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
| 99 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. |
| 100 | CIVIL PART (Repair & Maintenance of Electrical Section Room at Slapper-II |
| 101 | Removing dry old distemper,water proofing like cement paint and the like by scrapping, sand paperingand preparing the surface smooth including necessaryrepairs to scratches etc. complete. |
| 102 | Providing and applying plaster of paris putty of 2 mmthickness over plastered surface to prepare the surfaceeven and smooth complete. |
| 103 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shadeNew work (two or more coats) over andincluding water thinnable priming coat withcement primer |
| 104 | Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand(fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 |
| 105 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. Complete 75x47x1.80 mm |
| 106 | Providing and fixing ACP sheet 4 mm as per required shade & color as per dircton of EIC.( Make Cross bond) |
| 107 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete Double strip (horizontal type) |
| 108 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm |
| 109 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 110 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. |
| 111 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 112 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 113 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) |
| 114 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mmwide aperture with matching wood beading |
| 115 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100mm. |
| 116 | roviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 117 | 5'x3' table with drawer |
| 118 | S type Steel chair with arms Please Enable Macros to View BoQ information |
