|
| 1 | BUILDING WORK (B/R) |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 3 | Demolition of concrete of any position not otherwise specially provided for reinforced (reinforcement cut as required to facilitate demolition) all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 sqm but not exc 4sqm complete all as specified and directed. |
| 5 | Material and Labour for RCC 1:2:4 type B1 (using 20mm graded stone aggragate) as in lintel beam, cantilevers, bressummers,etc all as specified and directed. |
| 6 | Use and waste of Formwork to sides and soffits of floor or roof beams,beam haunchings, girders,bressummers, lintels, cantilevers, shelves including suports over hangs etc. for rough finished surfaces of concrete all as specified and directed. |
| 7 | Material and Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 8 | Material and Labour for mild steel TMT bars 6mm to10 mmdia cut to length bent to shape required including bending hooking, binding with MS wire not less than 0.9 mmdia but in stirrups complete all as specified and directed. |
| 9 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 10 | Supply and Fix anodised aluminium powder coated (minimum thickness of powder coating 50micron) frame for doors windows, ventilators and partition section with one or more rebates including joining cleats for fixing etc. complete all as specified and directed. |
| 11 | Supply and Fix Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 12 | Supply and Fix aluminium powder coated of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type, fixed type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and as directed. |
| 13 | Material and Labour for 12mm th prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to frame work as specified and directed. |
| 14 | Supply and fixing in repairs 7mm thick aluminium powder coated grill of make \\"Deco grill DG-104 model or equivalent\\" fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed. |
| 15 | Material and Labour for 5.5mm thick frosted sheet glass seleted quality in squares exc 0.5 Sqm each pane and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips, rubber neoprene pack in etc. all as specified and directed. |
| 16 | Material and Labour for 4.0mm thick frosted sheet glass seleted quality in squares exc 0.5 Sqm each pane and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips, rubber neoprene pack in etc. all as specified and directed. |
| 17 | Supply and Fix in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 18 | Supply and Fix in repairs hydraulically regulated door closer aluminum die cast body type complete suitable for door shutter width upto 1000 mm and weight between 61 to 80 kg complete all as specified and directed. Please Enable Macros to View BoQ information |
| 19 | Supply and Fix in repairs hydraulically regulated door closer aluminum die cast body type complete suitable for door shutter width upto 1000 mm and weight between 61 to 80 kg complete all as specified and directed. Please Enable Macros to View BoQ information |
