|
| 1 | S/F of 200Amp four pole change over switch on 50mmX50mmX6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per the direction and satisfaction of engineer in charge. |
| 2 | S/F of 100Amp four pole change over switch on 50mmX50mmX6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per the direction and satisfaction of engineer in charge. |
| 3 | S/F of 200Amp 415V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. |
| 4 | S/F of 100Amp 415V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. |
| 5 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 120sqmm 3.5core |
| 6 | 25sqmm 3.5core |
| 7 | 16sqmm 2 core |
| 8 | Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects. |
| 9 | S/F of LED Street Light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 110 to 130 watt confirming to IP 66 Protection having company logo engraved complete in all respects including labour Cat AAA, with 5 year warranty. |
| 10 | Labour charges for dismanteling of LED street light. |
| 11 | Labour charges for refixing of LED street light. |
| 12 | Supply and Fixing 400 Amp TPN Sandwich Aluminium Busbar trunking complete shutable for IP 54 protection with top end cover plate of 1.6mm thick G.I. Sheet with suitable arrangement for fixing etc complete in all respect. |
| 13 | S/F of 250 Amp 4 Pole MCCB (25KA) Thermal magnetic release. CAT-A |
| 14 | S/F of 100 Amp 4 Pole MCCB (25KA) Thermal magnetic release. CAT-A |
| 15 | S/F of LED street light potted driver set suitable for 110W to 130W complete in all respect. |
| 16 | S/F of Surge Protection Device (SPD) for LED lights. |
| 17 | S/F of cubical box dust and vermin proof 2/3/4 ways distribution box of 16swg MS sheet of 1.5mm thick with the suitable size of copper bushes 3 nos. 500Amp cut out unit as incoming inside locking arrangement, handle, danger plate etc. Including two coats of approved quality paint and earthing by two no. 7/10SWG wire which will be taken as loop from existing subtation earthing. The job including all material labour T&P suitable foundation for mounting the bars etc. complete in all respects. |
| 18 | S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat B |
| 19 | S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat B |
| 20 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B |
| 21 | S/F of 32 Amp 240 Volt SPN Metal Clad Rewirable type switch fuse unit on MDFEG/Teak wood board complete in all respects. |
| 22 | Supply of 4 KVA copper wound Stabilizer range 140-280 with plug top complete in all respects. |
| 23 | SITC of 10 HP Pumping plant including starter, control panel, cable, complete in all respect with all required material T&P labour etc. |
| 24 | S/L of B class heavy 100mm dia GI Pipe on pole or road crossing complete in all respects |
| 25 | Supply and fixing of 16.00 Meter High mast shaft of approved make with rising system hot dip galvanised inside and out side dip, having| pole sheet thickness 4 mm, Top dia minimum 150 mm, Bottom dia 360 mm, base plate 32 mm thick suitable for wind velocity as per IS:875 part 3 and having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries and its control gear boxes, 1.50 H P power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including Imaking suitable foundation as per manufacturer drawing/ site requirement along with foundation bolts, nuts, washers, anchor plates etc. complete in all respects. |
| 26 | Labour charges for dismanteling of 16mt. Height high mast light |
| 27 | Labour charges for refixing of 16mt. Height high mast light |
| 28 | Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. |
| 29 | Supply and Fixing 4 nos. 6 sq. mm. FRLSH PVC insulated multistrand copper conductor cable. |
| 30 | S/B of safe earthing electrode T-19 (hot dip galvanized), length up to 2000mm, outer pipe 50mm, inner pipe 25mm, terminal dia 12mm, outer GI pipe of 16swg and inner pipe of 12swg with hot dip galvanization up to 100micron filled with crytalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of earth lead will be extra) |
| 31 | Supply and Fixing of 32mm × 6mm GI strip from earth electrode directly in ground as required complete in all respect. |
| 32 | S/F following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, FYC fuses, isolating swich metering instrument & instrument box with CTs. Etc. In case of 25 A TPN compete in all respect. |
| 33 | Supply and fixing of single unit LED aviation obstruction light complete with transformner and LED spiral etc complete in all respects. |
| 34 | S/F of factory wired integral LED Flood Light Lumanaries with die cast aluminium housing and lences built with mandatory driver set suitable for 170 watt to 200 watt, confirming to IP 65/66 protection having company LOGO Engraved complete in all respects including labour. CAT-AAA, with 5 year warranty Please Enable Macros to View BoQ information |
