|
| 1 | PROPOSED CONSTRUCTION OF RCC COMPOUND WALL ( INCREASE IN HEIGHT) OF EAST SIDE & NORTH SIDE WITH ENTRANCE GATE AT SOLID WASTE MANAGEMENT CENTER AT NAGARSOGA ROAD FOR MUNICIPAL COUNCIAL AUSA DIST LATUR |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical MeansSpec No.Bd.A.1 Page No 259SSR I.No. 21.02 P.No. 189 |
| 3 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Up to 1.50 m.) By Mechanical MeansSpec No.Bd.A.3 Page No 259SSR I.No. 21.06 P.No. 190 |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washedSpec. No.: Bd. E.1 P. No. 287SSR I.No. 24.01 P.No. 215 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns andsteel stanchions etc. including bailing out water, Steel centering, formwork,cover blocks, laying/pumping, compaction and curingroughening the surface if special finish is to be provided (Excludingreinforcement and structural steel) etc. complete, with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) Spec. No. Bd.F.3 Page No. 298 and B.7, Page No.38SSR I.No. 25.11 P.No. 219Description of item |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec.No. Bd.F.5 Page No. 300 and B.7, Page. No. 38 SSR 1.No. 25.31 P.No. 221Ground Floor |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. Bd. F.6 Page No. 300 and B.7, Page No.38SSR I.No. 25.50 P.No. 223Ground Floor |
| 8 | Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting asSpec. No.: Bd. F.17 Page No. 306SSR I.No. 26.33 P.No. 233 |
| 9 | Providing and laying Castin situ/Ready Mix cement concrete in M-20 of trap / granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening the mif special finish is to be provided and curing complete (Excluding reinforcement and structural SSR I.No. 26.17 P.No. 185 |
| 10 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.SSR I.No. 32.03 P.No. 256 |
| 11 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colourand shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec. One Number: As directed by Engineer in.chamoSpec. No.: As directed by Engineer Incharge. SSR Item No. 23.09 P.No. 213 |
| 12 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning,preparing the plaster surface, applying primer coat,scaffolding if necessary,and watering the surface for two days etccomploto Spec. No.: As directed by Engineer Incharge.SSR Item No. 35.25 P. No. 277 |
| 13 | Royalty charges for supplying material items like Sand, Metal. Solina & Murum etc complete.Spec. No.: As directed by Engineer Incharge.Rate As Per DSR 2021-22Sand 211.95+4.23+21.19 = 237.37Other Material 211.95+4.23 216.18 |
| 14 | Testing charges for various building material items like Cement, Steel, Concrete, Sand, Metal, Soling, Murum, Tile, Teak Wood in Vigilance & Quality Control Laboratory etc completeSpec. No. As directed by Engineer Incharge.Rate As Per DSR 2021-22/Vigilance & Quality Control CircleConcrete Mix Design (With all Tests on basic materials) |
| 15 | Concret Cube |
| 16 | Steel |
| 17 | PROPOSED CONSTRUCTION OF B.T.ROAD FROM NAGAR PARISHAD UDYAN TO RAJPUT SAMAJ SMASHANBHUMI AT PRABHAG NO. TQ.AUSA DIST. LATUR |
| 18 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum Including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.Speci. No.:- MORTH 301RATE AS PER SSR OF 2022-23 Ι.ΝΟ.2.11 & Ρ.ΝΟ.23 |
| 19 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.Speci.No.:- MORTH 305RATE AS PER SSR OF 2022-23 Ι.ΝΟ.2.25 & P.No.24 |
| 20 | Supplying trap/granite/quartzite /gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete. (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) (a)40 mm Metal, By breaking Boulders (Hand broken).Speci. No.: As directed by Engineer in charge. RATE AS PER SSR OF 2022-23 Ι.ΝΟ.50.57 & P.No.346 |
| 21 | Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge.Speci. No.:- As directed by Engineer in charge.RATE AS PER SSR OF 2022-23 Ι.ΝΟ.50.58 & Ρ.ΝΟ.346RATE ANALYSIS |
| 22 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificialwaterino complete. Speci. No.: As directed by Engineer in charge.RATE AS PER SSR OF 2020-21 Ι.ΝΟ. 50.61 & Ρ.ΝΟ.72 |
| 23 | Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.Speci. No.: IRC SP-20 2002, Clause No. 8.7.3, Appendix 8.4RATE AS PER SSR OF 2022-23 Ι.ΝΟ.3.35(a) & P.NO.31 |
| 24 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (over BT Surface) VG-30.bulk hitumen rates are considered to arrive at rates) Speci. No.: MORTH 511RATE AS SSR OF OF 2022-23 I.ΝΟ. 4.12 & Ρ. NO.36 |
| 25 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading ichips and rolling, by static roller having weight 8 to 10 MT. etc. complete.Speci. No.: MORTH 513RATE AS SSR OF 2022-23 I.ΝΟ. 4.01 & Ρ. NO.35 |
| 26 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10sam. VG-30 bulk bitumen Speci. No.: MORTH 503RATE AS PER SSR OF 2022-23 Ι.ΝΟ. 3.31 & Ρ.ΝΟ.30 |
| 27 | In SSR for items of supply of Rubble, Murum, Soil, 60mm. /40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges. Prevalent Royalty charges shall be separately considered while preparing estimate and shall be part of Schedule-B of tender. Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt. i.e Revenue department [As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt. 04 June, 2021. States that the royalty charges Rs.600/-Per Brass (i.e .Rs.211.95/cum) are to be considered.E DSR ITEM NO. ... & PAGE NO....For All Other Minerals (211.95+4.23=216.18/Cum) For Sand (211.95+4.23+21.19=237.37/Cum) |
| 28 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by contractor.BITUMENPenetration, Softening Point, Flash & Fire Point, Specific Gravity. |
| 29 | Extraction Test Please Enable Macros to View BoQ information |
