|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per manufacturers instructions,as specified and directedby Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete as per manufacturers instructions,as specified and directedby Engineer-in-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 6 | S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed. |
| 7 | S&F Pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed. |
| 8 | S&F Bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 9 | M&L Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in CM (1:3) depth of embeded portion exc half brick & n.exc one brick etc complete all as specified and as directed. |
| 10 | M&L Providing PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats,etc complete all as specified and as directed. |
| 11 | S&F 35 mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc complete all as specified and as directed. |
| 12 | S&F 30 mm 2 nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc complete all as specified and as directed. |
| 13 | S&F in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 14 | S&F 100 mm size stainless steel butt hinges (medium weight) extruded complete all as specified and as directed by Engineer-in-Charge. |
| 15 | S&F 100 mm size MS Butt hinges (medium weight) cold rolled complete all as specified and as directed. |
| 16 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed. |
| 17 | S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 18 | S&F 300 mm long aluminium alloy,anodized sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bollts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 19 | S & F in repairs 140 mm long stainless steel door stopper with rubber shoe, nut (2 each on one stopper) with spring complete all as specified and as directed |
| 20 | S & F in repairs 2nd class hard wood plain small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stopes and the like, including all necessary labours, articales not exc 200 cu.cm each complete all as specified and as directed |
| 21 | M&L Preparation of new wood or wood based material surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer complete all as specified and as directed. |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified and as directed. |
| 23 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and as directed. |
| 24 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane and complete all as specified and as directed. |
| 25 | S&F 3mm thick Figured glass pin head type ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and as directed. |
| 26 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed. |
| 27 | M&L Second class hard wood plain fillets of sectional area exc 6& not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed. |
| 28 | M&L Second class hard wood plain fillets of sectional area exc13 & not exc 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed. |
| 29 | S&F in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work , fixed with screws to timber frame work complete all as specified and as directed. |
| 30 | S&F in repairs 12 mm thick Plywood grade BWR type BB, fixed with screws to frame work , fixed with svrews to timber frame work complete all as specified and as directed. |
| 31 | M&L 0.90 mm thick colour/white Decorative laminate sheet Type I of texture surface finish , colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed. |
| 32 | S&F 200mm long stainless steel decorative handle fixed with screws complete all as specified and as directed. |
| 33 | S&F 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and as directed. |
| 34 | S&F Stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and as directed. |
| 35 | S&F Stainless steel kitchen basket of size 17\\"x20\\"x4\\" of size complete all as specified and as directed. |
| 36 | All as per item No.35 above but of size 17x\\"x20\\"x6\\" complete all as specified and as directed. |
| 37 | All as per item No.35 above but of size 17x\\"x20\\"x8 inches complete all as specified and as directed. |
| 38 | S&F Stainless steel dust bin holder 10\\" diacomplete all as specified and as directed. |
| 39 | S & F Stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and as directed. |
| 40 | S & F in repairs Magnetic cup board/ward robe catcher consists of two main parts a magnet housed in a plastic or metal casing (attached to the cabinet frame) and a ferromagnetic strike plate complete all as specified and as directed. |
| 41 | S & F 17mm wide Veneer Edge Banding PVC Tape suitable for modular kitchen/cup board shutters etc the colour to match with lamination and complete all as specified and as directed. |
| 42 | S&F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs complete all as specified and as directed. |
| 43 | S&F 50 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed. |
| 44 | S&F in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 45 | S&F in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed. |
| 46 | S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.30mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, complete all as specified and as directed. |
| 47 | S&F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc complete all as specified and as directed. |
| 48 | M & L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 ,complete all as directed |
| 49 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed |
| 50 | S & F in repair 25mm dia, SS tubular curtain rod, complete all as specified and as directed. |
| 51 | S & F in repair SS brackets suitable for 25 mm dia tubular curtain rod (for item above) complete all as specified and as directed. |
| 52 | S&F in repair SS curtain rod finals fancy type suitable for 25 mm dia tubular curtain rod (for item above) complete all as specified and as directed. |
| 53 | S&F in repair 3 mm thick PVC sheet UV Resistant of any colour for fixing on gates complete all as specified and as directed. |
| 54 | M&L Mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and as directed. |
| 55 | S&F Mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and as directed. |
| 56 | Dismantling of timber scantlings 40 sq. cm and over in section, in any position etc, as in unframed work complete all as specified and directed. |
| 57 | Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 58 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge, valley gutter etc complete all as specified and as directed. |
| 59 | M&L Mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A complete all as specified and as directed. |
| 60 | S&F Rolled mild steel sections of Fe 410-W (Gde E-250) Quality “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 61 | S&F Wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and as directed. |
| 62 | S&F Pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed. |
| 63 | S&F Pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed. |
| 64 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and as directed. |
| 65 | Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed. |
| 66 | M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 m mean radius built in CM (1:6) complete all as specified and as directed. |
| 67 | Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 68 | M&L Rendering 15 mm thick CM (1:4) on fair faces of brick work or stone masonary surfaces and finished the surface smooth and even without using extra cement complete all as specified and as directed. |
| 69 | M&L Rendering 12 mm thick CM (1:4) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed. |
| 70 | M&L Rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed. |
| 71 | M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 72 | M&L Preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 73 | M&L Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 74 | M&L Preparation of newly plastered wall surfaces and applying two coats of Acrylic distemper over and including a coat of alkali resistant primer over and including 3 mm thick wall care putty complete all as specified and as directed. |
| 75 | Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 76 | M & L PCC (1:2:4) Type B0 (using 12.5 mm graded stone aggregate) with using water proofing compound @ 2% by weight of cement or as per manufacturer's instructions as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed. |
| 77 | M&L Rendering 10mm thick CM (1:4) on roof surfaces duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately under relevant item in this schedule |
| 78 | Supply only water proofing compound complete all as specified and as directed. |
| 79 | M & L Application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres APP, membrane on roof slab all as per manufacturer's instructions and zonal specification etc complete all as specified and as directed. |
| 80 | M&L Making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed. |
| 81 | M&L Cleaning of roof and chhajja top surfaces with wire brush, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed. |
| 82 | Disconnecting existing tanks disconnecting existing tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately), exc 250& not exc 500 litrs tanks complete all as specified and as directed. |
| 83 | Disconnecting existing tanks disconnecting existing tank, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately), exc 500& not exc 1000 litrs tanks complete all as specified and as directed. |
| 84 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. |
| 85 | S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. |
| 86 | S & F in repairs E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid including providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed |
| 87 | Demolition of Cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 88 | M & L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 89 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
