|
| 1 | A)Supply, Fabrication, Transportation, Erection of Rubber seal Items-I)rubber seal(Gate No 1,2,3& 4 )-Angle shaped Side Rubber Seal-7.25 m length Size:-Base width 80mmx15mm(t)x Angle 30 degree Materials:-Natural or synthetic rubber conforming to IS: - 4623 -1967 -04 Nos,Bottom Rubber Seal - 12 mSize:-Base width 100 mmx15 mm(t)Materials:-Natural or synthetic conforming to IS:-4623-1967-04 Nos.,Hexagonal Bolts & Nuts M16x90N with double Washer, Materials: Stainless Steel -24 Kg., II) Supply of Bottom Seal Flat-1266.04 Kg.,III) Supply of Cover plate , angle for Ralling and Chequred Plate -865.36 Kg., Iv) Supply of Bought Out Items-Plumer Block SN-5180- 03 nos., Brake Shoe-05 Sets, EM Brake Coil-04 Sets, Steel Wire Rope Dia 28mm x 30 Mtr. Long Costruction 6/36, Core Steel Both end Shocke-02 Nos., Black Rubber Hose Pipe -2 Mtr.,Nut, Bolt and washer-30 Kg., Grease-02 Nos. v) Maintenance of 04 Nos radial gates including Removing of damage rubber seal and replacement of new rubber seal with bolts and nuts, Applying of Cadmium Compound (Usha Martine/ Hytak-5 Make) in the steel wire ropes-80 kg, Greasing of Gears and Pinions of end reduction units, position indicators-Grease (Total Elf Multies XL-3)-20 kg,Diesel /kerosene-20 ltr.,Gear Oil (GearELF4 90EP) - 20 ltr., bushes of trunnions and position indicators, hinges and pins of electromagnetic brakes and all movables parts etc, Change of stator and checking of all electrical connectivity,Checking of oil level in worm gear reducer and topping up , Adjustment of Spring tension in electromagenetic brakes, Adjustment of wire rope, Greasing of Turn buckle pins, equaliser plate pins and turn buckle threads .. complete in all respects with all leads and lifts for smooth operation of Gates as per drawing, specifications and direction of Engineer-in-charge. |
| 2 | Sand Blasting and Painting of all structural components including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paint of 100 micron each for i) a)Epoxy based primerPrimer (Epilux 610) or eqv specification @ 40 micron/coat-1089.84 Sqm., b)Epoxy paint (1st coat) EPLLUX 555HB or eqv specification @ 100 micron/Coat-1089.84 Sqm ,c) Epoxy paint (2nd coat) EPLLUX 555HB or eqv specification@ 100 micron/Coat-1089.84 Sqm.,d) Thinner for epoxy paint (Toluene 844) or eqv specification.-1089.84 Sqm., e) GI wire brush-48 Nos.,f)Other painting brush-48 Nos. and painting of Tunion walk way , Hoist bridge and gear box room of Hoisting area-1902.59 Sqm., each for i)Zinc rich primer @ 40 micron/coat ii)1 st coat Aluminium paint @ 100 micron/Coat iii)2 st coat Aluminium paint @ 100 micron/Coat iv)Thinner for epoxy paint (Toluene 844) or eqv specification. ,e) GI wire brush-20 Nos.,f)Other painting brush-12 Nos. etc. all inclusive of labour, materials and consumables as per relevand IS code specifications and approved drawing with all lead & lifts. |
| 3 | i. Maintenance work of Left HR of 02nos (size-2000 mm x 1500 mm) to bea. Repair of Gate accessories for proper Gate function.b. Greasing all the movable parts of the gate system.c. Welding wherever necessary.d. Erection and testing of gate with proper alignment.ii. Supply of following bought out materials.Hexagonal bolt M 12 x 50 N IS- 1364 with Washer -20 kg.,Pedestal Hexagonal bolt M 20 x 55 N IS- 1364.-20 kg., Top Rubber seal (32mm x 10mm th-80mm width)-3.5 m., Bottom Rubber seal (10mm th-75mm width)-3.5 m., Side seal ( 32mm x 12mm th-80mm width Single bulb)-6m., Corner seal ( 32mm x 12mm th-80mm width Single bulb)-2.4m., Restraining arrangement bush ID 100mm thickness 10mm & length 200mm Aluminium bronze all inclusive of material, machining.- 10 nos., Restraining arrangement MS bush clamp ID 120mm length 200mm all inclusive of material, machining as per required-10nos., Anchor bar-16 nos., Single Thrust Ball bearing SKF51224 or equiv.-4 nos., Grease and gear oil- 10 kg. iii)Supply and Fabrication structural steel-134 kg for Seal Changing accessories including machinery, fixtures, labour, cutting, alligning, welding, cleaning, finishing all complete as per the specification with all lead and lifts (excluding bought out items )as per the direction of Engineer-in-charge iv). Painting of Gate leaf area-24 Sqm, hoist area-27 Sqm.including cleaning, degreasing, handling cost of paint, one coats by epoxy primer , two coat of epoxy black,one coat red oxide primer and two coat aluminium paint including cost of labour, consumable, hire charge of machinary etc. all inclusive of labour, materials & consumables as per direction of Engineer-in-charge. v)2nd Stage concreting using M-20 grade concrete including cost of materials, labour, shuttering and centering etc of Concreting- 4m³ and concrete cutting-1m³. This work includes all labour, tools and tackles, machineries, Dismantling, Erection, trial, testing and commissioning etc. completed in all respect as per detailed in estimate. |
| 4 | i). Maintenance work of Right HR of 04nos (size-2000 mm x 1500 mm) to bea. Repair of Gate accessories for proper Gate function.b. Greasing all the movable parts of the gate system.c. Welding wherever necessary.d. Erection and testing of gate with proper alignment.ii). Supply of following bought out materials Hexagonal bolt M 12 x 50 N IS- 1364 with Washer -40 kg., Pedestal Hexagonal bolt M 20 x 55 N IS- 1364.-40 kg., Top Rubber seal (32mm x 10mm th-80mm width)-7 m., Bottom Rubber seal (10mm th-75mm width)-7 m., Side seal ( 32mm x 12mm th-80mm width Single bulb)-12m., Corner seal ( 32mm x 12mm th-80mm width Single bulb)-4.8m., Worm & Wormgear set R4/49/8/11-315 mm of IS : 3734 inclussive of cast steel worm gear, 55C8 worm & shaft, phosphorous bronze nut suitably square threaded, all including cost of material, machining etc.-2set, Dia 100mm Screw Rod suitably square threaded to M78 x 10 all inclusive of cost of material, straightening and machining.-5 m., Restraining arrangement bush ID 100mm thickness 10mm & length 200mm Aluminium bronze all inclusive of material, machining.- 4 nos., Restraining arrangement MS bush clamp ID 120mm length 200mm all inclusive of material, machining as per required-20 nos., Anchor bar- 8 nos., Single Thrust Ball bearing SKF51224 or equiv.-8 nos., Grease and gear oil- 20 kg. iii) Supply and Fabrication of Steel for Seal Changing- 260 kg(approx.) with all accessories including machinery, fixtures, labour, cutting, alligning, welding, cleaning, finishing all complete as per the specification with all lead and lifts (excluding bought out items )as per the direction of Engineer-in-charge. iv). Painting of Gate leaf area-48 Sqm, hoist area-30 Sqm, walk-way,walk-way railing & Beam area-526.07 Sqm., including cleaning, degreasing, handling cost of paint, one coats by epoxy primer , two coat of epoxy black,one coat red oxide primer and two coat aluminium paint including cost of labour, consumable, hire charge of machinary etc. all inclusive of labour, materials & consumables as per direction of Engineer-in-charge. vi)2nd Stage concreting using M-20 grade concrete including cost of materials, labour, shuttering and centering etc of Concreting- 4m³ and concrete cutting-1m³. This work includes all labour, tools and tackles, machineries, Dismantling, Erection, trial, testing and commissioning etc. completed in all respect as per detailed in estimate. |
| 5 | Transportation of above said half finished materials from workshop, generator welding transformer, derrick &other T&p, from workshop to worksite around 80 km to & fro Please Enable Macros to View BoQ information |
