Name of Work:- Supply & Fixing of overhead canteliver & retroreflectorised sign boards at REIZ Kharayta, Bundi (Based on Unified PWD Road BSR 2025)
Sl. No.
Item Description
1
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801800 mm x 600 mm rectangular
2
Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801
3
Supply and fixing of overhead and cantilever type XI retro reflective sign plate made out of 3 mm thick aluminium composite panel,faces to be covered with green type XI retro reflective sheeting and the matter & logo with overlay film type of sheeting after the etching treatment of aluminium sheeting. The backside of sheeting should be covered with two coats of epoxy/powder coating. The sheet shall be fixed on a frame of 40x40x5 angle iron
4
Foundation work of foundation in RCC 1:2:4 including excavation,reinforcement, shuttering ,backfilling & removal of excess earth as per drawing.
5
Erection Overhead Cantilever sign board and Structure with with gantry cranes at site including nut bolting etc.
6
Supply of steel structure in single section. Built up section, frame from M.S. black pipes (medium duty) as per IS 1239(part 1) 1979 with connecting plate anchor bolts including cutting,welding , bolting, fixing in position and applying primer coat of approved steel primer and two coat of synthetic enamel paint including foundation bolts. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
