Tender For Pre-Monsoon Maintence Of 11Kv/3.3Kv,440V/220V Ohl With Erection , Dismantling And Shifting Of Poles At Different Projects Under Kuju Area., Ramgarh-Jharkhand

TDR : 54964344

Tender Notice
BOQ

7 Days Left

Ramgarh , Jharkhand

Tender Brief : Tender For Pre-Monsoon Maintence Of 11Kv/3.3Kv,440V/220V Ohl With Erection , Dismantling And Shifting Of Poles At Different Projects Under Kuju Area.

Document Fees
Refer document

EMD
₹ 42000.0 /-

Tender Value
Refer document

Submission Date
14-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	A)11 KV Overhead line from Kuju to Topa, Banwar, OCP, colony and Workshop feeder
2	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation Including excavation and refilling ete, as required. Above 10 metre and upto 12 metre
3	Supply and errection of 11KV Pin Insulator complete with large steel head GI pins, Nuts and washers etc as req.
4	Supply and errection of 11 KV Disc insulator for 11 KV OH line with galvanised insulator fittings ball & socket type and complete with strain clamps, bolts, nuts etc as req
5	Supply of GI Wire & SWG
6	Errection cost of Gl wire including winding etc. as required.
7	Supplying of channel Iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ crons arm for single 11 KV over head line conductor complete 7 with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required
8	Supply of chanel fron 75 mm X 40 mm X 6 mm (7.14 Kg/m) cross arm for two 11 KV OH. line conductor complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6 mm MS flat iron clamp bolts and nuts including drilling of holes fot insulators, pins, bolts & nuts etc and painting with primer and finish paint as required
9	Supply of two lengths of channel iron 75 mm X 40 MM X 5.7 Kg/m double pole cross arm for 3 wire O.H. line conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side 9th the channel iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/ fittings, nolts & nuts etc and painting with primer and finish paint as required.
10	Supplying and erection of bow stay set complete (galvanised) with 19/20 mm díu X 18 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement:3 course sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required
11	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
12	Dismantling of OH lines comprising of copper/ aluminium OH. conductor 14 GI wire, cross arms, insulator ete as req
13	Dismantling of pole/street light standard/stut embeded In cement concrete 15 etc as req
14	Providing and laying in position cement concrete of specified grade exlcuding the cost of centering and shuttering - All work up to plinth level 16 1:3:6 (1 cement 2 coarse sand 6 graded stone aggregate 20 mm nominal
15	Erection of cradle guard
16	B) 440V Overhead line of composite colony Topa and Kuju New Siding
17	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate 40mm nominal size) foundation Including excavation and refilling etc. as required. Above 8 metre and upto 10 metre.
18	Supplying & errection of 100 mm X 80 mm pin Insulator complete with Gl spindle and nuts etc as required.
19	Supplying and errection of 100 mm X 110 mm shackle Insulator with Gl bolt, nuts and straps etc as req.
20	Supply of GI Wire 6 SWG
21	Erection cost of Gl wire including winding ete, as required
22	Supply of channel iron 75 mm X 40 mm X 7.14 Kg/M cross arm for 4 wire 24 O.H. line complete with clamps, bolts and nuts etc and painting with primer and finish paint as req.
23	Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.1. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
24	Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter 28 and above including binding etc. as required.
25	Dismantling of O.H. lines comprising of copper/alluminium O.H. conductor Gl wire, cross arms, insulator ete as req
26	Dismantling of pole/street light standard/strut embeded in cement concrete etc as req
27	Providing and laying in position cement concrete of specified grade exlcuding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement: 2 coarse sand: 6 graded stone aggregate 20 mm nominal size)
28	Supply & erection of LT phase separator 04 wire (PVC/Rubber type) as required
29	C) 11KV, 3.3KV, Overhead line from Murpa to 10 No, Substation, OCP, Colony
30	Erection of metallic pole of following length in cement comeresel 36(1 cement: course sand 6 graded stone aggregate 40men nominal size) foundation including excavation and refilling ete, as required. Above 10 metre and upto 12 metre
31	Supply and errection of 11KV Pin Insulator complete with large steel head Gt pins, mits and washers etc as req
32	Supply and errection of 11 KV Disc insulator for 11 KV OH line with galvanised insulator fittings ball & socket type and complete with strain clamps, bolts, nuts etc as req
33	Supplying of channel Iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/crons arm for single 11 KV over head line conductor complete 7 with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required
34	Supply of chanel fron 75 mm×40 mm×6 mm(7.14 Kg/m) cross arm for two 11 KV OH. line conductor complete with 50 mm X 50 mm×6 mm (angle iron bracket welded to the channel iron and complete with 50 mm x 6 mm MS flat iron clamp boits and nuts including drilling of holes fot insulators, pins, bolts & nuts etc and painting with primer and finish paint as required
35	Supply of two lengths of channel iron 75 mm X 40 MM X 5.7 Kg/m double pole cross arm for 3 wire O.H. kline conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side 9th the channel iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/fittings, nolts & nuts etc and painting with primer and finish paint as required.
36	Supplying and erection of bow stay set complete (galvanised) with 19/20 mm diu X 18 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm×60 cr), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement:3 course sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required
37	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accesories, and providing masury enclosure with cover plate having 11 locking arrangement and watering pipe of 2.7 metre long etc with charcoal/coke and salt as required
38	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut 12 bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
39	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
40	Dismantling of OH lines comprising of copper/alluminium OH. conductor 14 Gl wire, cross arms, insulator ete as req
41	Dismantling of pole/street light standard/stut embeded in cement concrete 15 etc as req
42	Providing and laying in position cement concrete of specified grade exlcuding the cost of centering and shuttering - All work up to plinth level 16 1:3:6 (1 cement 2 coarse sand 6 graded stone aggregate 20 mm nominal
43	Erection of cradle guard
44	D) 440V, Overhead line of Sarubera colony, LCH, etc
45	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 8 metre and upto 10 metre.
46	Supplying & errection of 100 mm X 80 mm pin Insulator complete with Gl spindle and nuts etc as required.
47	Supplying and errection of 100 mm X 110 mm shackle insulator with Gl bolt, nuts and straps etc as req.
48	Supply of channel iron 75 mm X 40 mm X 7.14 kg/M cross arm for 4 wire 24 O.H. line complete with clamps, bolts and nuts etc and painting with primer and finish paint as req.
49	Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.1. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
50	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having 26 locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.
51	Supplying and laying 25mm×5 mm copper strip at 0.50 metre below ground as strip earth electrode, including, connection/terminating with nut, bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring, washer spaced at 50mm)
52	Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter 28 and above including binding etc. as required.
53	Dismantling of O.H. lines comprising of copper/alluminium O.H. conductor Gl wire, cross arms, insulator ete as req
54	Dismantling of pole/street light standard/strut embeded in cement concrete etc as req
55	E) 11KV Overhead line of Karma Project
56	Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation Including excavallon and refilling etc. as required. Above 10.00 metre and upto 12.00 metre
57	Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, huts, washers etc. as required.
58	Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
59	Supply of Gil. wire 85WG (Galvanized Iron Fencing Wire 115.00- 17.54=97.46) Less 18% GST) (for cradling 50 Mtr X 7 WIRE X 131 Kg P/Kmx1.05-8 Nos 385.14 Kg )-for-earthing contnlues 50 MtrX8 SPN X131 Kg P/Km X 1.05 =55.02 kg)
60	Erection of G.I. Wire No. 8 SWG including binding etc. as required
61	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. (for erection 50 Mtr X 4 SPN X 3 WIRE X 394 Kg P/Kmtr X 1.05=248.22 Kg
62	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) pole top bracket/cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.
63	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flatiron clamps, bolts and nuts including drilling holes for insulatorpins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
64	Supplying and erection of bow stay set complete (galvanised)with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle(20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain Insulator etc In cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation Including excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle Iron with 50 mm dla pulley fixed at one end of the brace as required.
65	Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7,14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel Iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for Insulator pins/fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required.
66	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for Insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required for single brkt and for cradling
67	Earthing with copper earth plate 600 וווו X 600 X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.
68	Supply & Fixing of11 KV/3.3KV grade Air Break Switch 630Amp horizontal type
69	Supply & Fixing of Aluminium Unarmoured cable single core1100 voltage grade 35 sq mm
70	Supply & Fixing of Aluminium tube terminal 35 sq mm
71	Dismantling of over head lines comprising of copper/aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required. (Dismantling Dog conductor Incoming 50 Mtr X 3 WIRE X 4 SPN =600 Mtr X 394 Kg P/Kmtr X 1.05=248.22 Kg Chanel DP Bracket 02 Set X 3.15 Mtr X 2 Chanel (100 mm X 50 mm X 8 mm Size) 12.6 Mtr X 9.85 Kg P/Mtr =124.11 Kg Chanel SP Bracket 3 Set X 1.90 Mtr (100 mm X 50 mm X 8 mm Size) = 5.7 Mtr X 9.85 Kg PMtr /=56.15 Kg G.1 Pin with Insulator 10 Nos X 1 Kg =10 Kg Disc with gruffer 16 Nos X 1.5 Kg= 16.8 Kg)
72	Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc, as required.
73	F) 3.3 KV Overhead line of Karma Project
74	Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre
75	Supplying and erection of 3.3 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
76	Supplying and erection of 3.3 KV disc Insulator for 3.3 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc, as required.
77	Supply of G.I. wire 8 SWG (Galvanized Iron Fencing Wire 115.00- 17.54=97.46) Less 18% GST) (for cradling 50 Mtr X 7 WIRE X 131 Kg P/Km X 1.05X8 Nos 385,14 Kg + for earthing contnlues 50 Mtr X 20 SPIN X131 Kg P/Km X 1.05-137.55)
78	Erection of G.I. Wire No. 8 SWG including binding etc. as required
79	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. (for erection 50 Mir X 4 SPN X 3 WIRE X 394 Kg P/Kmtr X 1.05-248.22 Kg
80	Supplying channel iron 75 mm X 40mm X 6 mm (7.14 kg permetre) Mole top bracket/cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and palriting with primer and finish paint as required
81	Supplying and erection of bow stay set complete (galvanised)
82	Supplying of two lengths of channel Iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel Iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required.
83	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required.for single brkt and for cradling
84	Dismantling of over head lines comprising of copper/aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required. (Dismantling Dog conductor Incoming 50 Mtr X 3 WIRE X 10 SPN=1500 Mtr X 394 Kg P/Kmtr X 1.05=591.00 Kg Chanel DP Bracket 2 Set X 3.15 Mtr X 2 Chanel (100 mm X 50 mm X 8 mm Size) = 12.6 Mtr X 9.85 Kg P/Mtr =124.11 Kg Chanel SP Bracket 6 Set X 1.90 Mtr (100 mm X 50 mm X 8 mm Size) = 11.4 Mtr X 9.85 Kg P/Mtr=112.29 Kg G.I Pin with Insulator 20 Nos X 1 Kg =20 Kg Disc with gruffer 20 Nos X 1.5 Kg= 30 Kg)
85	Supply & Fixing of11 KV/3.3KV grade Air Break Switch 630Amp horizental type
86	G) 440V/220V Overhead line of Karma Project
87	Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre
88	Supply of two lengths of channel iron 75 mmX40 MMX5.7 Kg./m double pole cross arm for 4 wire O.H. kline conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side th the channel Iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/fittings, nolts & nuts etc and painting with primer and finish paint as required.
89	Erection of angle iron/ channel iron cross arm on wood/RCC/ PCC/steel túbular/ rail pole etc. as required.
90	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required.for single brkt and for cradling
91	Supplying and erection of stay set complete (galvanised) with 19/20 mm día X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/4.00 mm dla G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
92	Supplying and erection of galvanised 'D' Iron clamps.complete-with- shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.
93	Supplying and erection of 100 mm X 80 mm pin insulator complete with G.I. Spindle and nuts etc. assequired
94	Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameler including binding etc. as required. (4 spanX 4wireX40mtrX0.214kg X 10=107.9 kg)
95	Dismantling of O.H. lines comprising of copper/alluminium O.H. conductor Gl wire, cross arms, insulator etc as req. (4 span X 3 wire X 40mtr X.214kg/mtr X1.05=143.08 kg)
96	Dismantling of pole/street light standard /strut embeded In cement concrete etc as req.
97	PVC 1100V Phase Separator for 4wire, 440V overhead line (10span X 25 no/span=300 Nos:
98	Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jharkhand Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Overhead Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Pre-Monsoon Maintence Of 11Kv/3.3Kv,440V/220V Ohl With Erection , Dismantling And Shifting Of Poles At Different Projects Under Kuju Area., Ramgarh-Jharkhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	A)11 KV Overhead line from Kuju to Topa, Banwar, OCP, colony and Workshop feeder
2	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation Including excavation and refilling ete, as required. Above 10 metre and upto 12 metre
3	Supply and errection of 11KV Pin Insulator complete with large steel head GI pins, Nuts and washers etc as req.
4	Supply and errection of 11 KV Disc insulator for 11 KV OH line with galvanised insulator fittings ball & socket type and complete with strain clamps, bolts, nuts etc as req
5	Supply of GI Wire & SWG
6	Errection cost of Gl wire including winding etc. as required.
7	Supplying of channel Iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ crons arm for single 11 KV over head line conductor complete 7 with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required
8	Supply of chanel fron 75 mm X 40 mm X 6 mm (7.14 Kg/m) cross arm for two 11 KV OH. line conductor complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6 mm MS flat iron clamp bolts and nuts including drilling of holes fot insulators, pins, bolts & nuts etc and painting with primer and finish paint as required
9	Supply of two lengths of channel iron 75 mm X 40 MM X 5.7 Kg/m double pole cross arm for 3 wire O.H. line conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side 9th the channel iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/ fittings, nolts & nuts etc and painting with primer and finish paint as required.
10	Supplying and erection of bow stay set complete (galvanised) with 19/20 mm díu X 18 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement:3 course sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required
11	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
12	Dismantling of OH lines comprising of copper/ aluminium OH. conductor 14 GI wire, cross arms, insulator ete as req
13	Dismantling of pole/street light standard/stut embeded In cement concrete 15 etc as req
14	Providing and laying in position cement concrete of specified grade exlcuding the cost of centering and shuttering - All work up to plinth level 16 1:3:6 (1 cement 2 coarse sand 6 graded stone aggregate 20 mm nominal
15	Erection of cradle guard
16	B) 440V Overhead line of composite colony Topa and Kuju New Siding
17	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate 40mm nominal size) foundation Including excavation and refilling etc. as required. Above 8 metre and upto 10 metre.
18	Supplying & errection of 100 mm X 80 mm pin Insulator complete with Gl spindle and nuts etc as required.
19	Supplying and errection of 100 mm X 110 mm shackle Insulator with Gl bolt, nuts and straps etc as req.
20	Supply of GI Wire 6 SWG
21	Erection cost of Gl wire including winding ete, as required
22	Supply of channel iron 75 mm X 40 mm X 7.14 Kg/M cross arm for 4 wire 24 O.H. line complete with clamps, bolts and nuts etc and painting with primer and finish paint as req.
23	Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.1. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
24	Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter 28 and above including binding etc. as required.
25	Dismantling of O.H. lines comprising of copper/alluminium O.H. conductor Gl wire, cross arms, insulator ete as req
26	Dismantling of pole/street light standard/strut embeded in cement concrete etc as req
27	Providing and laying in position cement concrete of specified grade exlcuding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement: 2 coarse sand: 6 graded stone aggregate 20 mm nominal size)
28	Supply & erection of LT phase separator 04 wire (PVC/Rubber type) as required
29	C) 11KV, 3.3KV, Overhead line from Murpa to 10 No, Substation, OCP, Colony
30	Erection of metallic pole of following length in cement comeresel 36(1 cement: course sand 6 graded stone aggregate 40men nominal size) foundation including excavation and refilling ete, as required. Above 10 metre and upto 12 metre
31	Supply and errection of 11KV Pin Insulator complete with large steel head Gt pins, mits and washers etc as req
32	Supply and errection of 11 KV Disc insulator for 11 KV OH line with galvanised insulator fittings ball & socket type and complete with strain clamps, bolts, nuts etc as req
33	Supplying of channel Iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/crons arm for single 11 KV over head line conductor complete 7 with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required
34	Supply of chanel fron 75 mm×40 mm×6 mm(7.14 Kg/m) cross arm for two 11 KV OH. line conductor complete with 50 mm X 50 mm×6 mm (angle iron bracket welded to the channel iron and complete with 50 mm x 6 mm MS flat iron clamp boits and nuts including drilling of holes fot insulators, pins, bolts & nuts etc and painting with primer and finish paint as required
35	Supply of two lengths of channel iron 75 mm X 40 MM X 5.7 Kg/m double pole cross arm for 3 wire O.H. kline conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side 9th the channel iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/fittings, nolts & nuts etc and painting with primer and finish paint as required.
36	Supplying and erection of bow stay set complete (galvanised) with 19/20 mm diu X 18 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm×60 cr), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement:3 course sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required
37	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accesories, and providing masury enclosure with cover plate having 11 locking arrangement and watering pipe of 2.7 metre long etc with charcoal/coke and salt as required
38	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut 12 bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
39	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
40	Dismantling of OH lines comprising of copper/alluminium OH. conductor 14 Gl wire, cross arms, insulator ete as req
41	Dismantling of pole/street light standard/stut embeded in cement concrete 15 etc as req
42	Providing and laying in position cement concrete of specified grade exlcuding the cost of centering and shuttering - All work up to plinth level 16 1:3:6 (1 cement 2 coarse sand 6 graded stone aggregate 20 mm nominal
43	Erection of cradle guard
44	D) 440V, Overhead line of Sarubera colony, LCH, etc
45	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 8 metre and upto 10 metre.
46	Supplying & errection of 100 mm X 80 mm pin Insulator complete with Gl spindle and nuts etc as required.
47	Supplying and errection of 100 mm X 110 mm shackle insulator with Gl bolt, nuts and straps etc as req.
48	Supply of channel iron 75 mm X 40 mm X 7.14 kg/M cross arm for 4 wire 24 O.H. line complete with clamps, bolts and nuts etc and painting with primer and finish paint as req.
49	Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.1. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
50	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having 26 locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.
51	Supplying and laying 25mm×5 mm copper strip at 0.50 metre below ground as strip earth electrode, including, connection/terminating with nut, bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring, washer spaced at 50mm)
52	Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter 28 and above including binding etc. as required.
53	Dismantling of O.H. lines comprising of copper/alluminium O.H. conductor Gl wire, cross arms, insulator ete as req
54	Dismantling of pole/street light standard/strut embeded in cement concrete etc as req
55	E) 11KV Overhead line of Karma Project
56	Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation Including excavallon and refilling etc. as required. Above 10.00 metre and upto 12.00 metre
57	Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, huts, washers etc. as required.
58	Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
59	Supply of Gil. wire 85WG (Galvanized Iron Fencing Wire 115.00- 17.54=97.46) Less 18% GST) (for cradling 50 Mtr X 7 WIRE X 131 Kg P/Kmx1.05-8 Nos 385.14 Kg )-for-earthing contnlues 50 MtrX8 SPN X131 Kg P/Km X 1.05 =55.02 kg)
60	Erection of G.I. Wire No. 8 SWG including binding etc. as required
61	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. (for erection 50 Mtr X 4 SPN X 3 WIRE X 394 Kg P/Kmtr X 1.05=248.22 Kg
62	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) pole top bracket/cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.
63	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flatiron clamps, bolts and nuts including drilling holes for insulatorpins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
64	Supplying and erection of bow stay set complete (galvanised)with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle(20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain Insulator etc In cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation Including excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle Iron with 50 mm dla pulley fixed at one end of the brace as required.
65	Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7,14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel Iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for Insulator pins/fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required.
66	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for Insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required for single brkt and for cradling
67	Earthing with copper earth plate 600 וווו X 600 X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.
68	Supply & Fixing of11 KV/3.3KV grade Air Break Switch 630Amp horizontal type
69	Supply & Fixing of Aluminium Unarmoured cable single core1100 voltage grade 35 sq mm
70	Supply & Fixing of Aluminium tube terminal 35 sq mm
71	Dismantling of over head lines comprising of copper/aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required. (Dismantling Dog conductor Incoming 50 Mtr X 3 WIRE X 4 SPN =600 Mtr X 394 Kg P/Kmtr X 1.05=248.22 Kg Chanel DP Bracket 02 Set X 3.15 Mtr X 2 Chanel (100 mm X 50 mm X 8 mm Size) 12.6 Mtr X 9.85 Kg P/Mtr =124.11 Kg Chanel SP Bracket 3 Set X 1.90 Mtr (100 mm X 50 mm X 8 mm Size) = 5.7 Mtr X 9.85 Kg PMtr /=56.15 Kg G.1 Pin with Insulator 10 Nos X 1 Kg =10 Kg Disc with gruffer 16 Nos X 1.5 Kg= 16.8 Kg)
72	Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc, as required.
73	F) 3.3 KV Overhead line of Karma Project
74	Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre
75	Supplying and erection of 3.3 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
76	Supplying and erection of 3.3 KV disc Insulator for 3.3 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc, as required.
77	Supply of G.I. wire 8 SWG (Galvanized Iron Fencing Wire 115.00- 17.54=97.46) Less 18% GST) (for cradling 50 Mtr X 7 WIRE X 131 Kg P/Km X 1.05X8 Nos 385,14 Kg + for earthing contnlues 50 Mtr X 20 SPIN X131 Kg P/Km X 1.05-137.55)
78	Erection of G.I. Wire No. 8 SWG including binding etc. as required
79	Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. (for erection 50 Mir X 4 SPN X 3 WIRE X 394 Kg P/Kmtr X 1.05-248.22 Kg
80	Supplying channel iron 75 mm X 40mm X 6 mm (7.14 kg permetre) Mole top bracket/cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and palriting with primer and finish paint as required
81	Supplying and erection of bow stay set complete (galvanised)
82	Supplying of two lengths of channel Iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel Iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required.
83	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required.for single brkt and for cradling
84	Dismantling of over head lines comprising of copper/aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required. (Dismantling Dog conductor Incoming 50 Mtr X 3 WIRE X 10 SPN=1500 Mtr X 394 Kg P/Kmtr X 1.05=591.00 Kg Chanel DP Bracket 2 Set X 3.15 Mtr X 2 Chanel (100 mm X 50 mm X 8 mm Size) = 12.6 Mtr X 9.85 Kg P/Mtr =124.11 Kg Chanel SP Bracket 6 Set X 1.90 Mtr (100 mm X 50 mm X 8 mm Size) = 11.4 Mtr X 9.85 Kg P/Mtr=112.29 Kg G.I Pin with Insulator 20 Nos X 1 Kg =20 Kg Disc with gruffer 20 Nos X 1.5 Kg= 30 Kg)
85	Supply & Fixing of11 KV/3.3KV grade Air Break Switch 630Amp horizental type
86	G) 440V/220V Overhead line of Karma Project
87	Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre
88	Supply of two lengths of channel iron 75 mmX40 MMX5.7 Kg./m double pole cross arm for 4 wire O.H. kline conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side th the channel Iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/fittings, nolts & nuts etc and painting with primer and finish paint as required.
89	Erection of angle iron/ channel iron cross arm on wood/RCC/ PCC/steel túbular/ rail pole etc. as required.
90	Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required.for single brkt and for cradling
91	Supplying and erection of stay set complete (galvanised) with 19/20 mm día X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/4.00 mm dla G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
92	Supplying and erection of galvanised 'D' Iron clamps.complete-with- shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.
93	Supplying and erection of 100 mm X 80 mm pin insulator complete with G.I. Spindle and nuts etc. assequired
94	Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameler including binding etc. as required. (4 spanX 4wireX40mtrX0.214kg X 10=107.9 kg)
95	Dismantling of O.H. lines comprising of copper/alluminium O.H. conductor Gl wire, cross arms, insulator etc as req. (4 span X 3 wire X 40mtr X.214kg/mtr X1.05=143.08 kg)
96	Dismantling of pole/street light standard /strut embeded In cement concrete etc as req.
97	PVC 1100V Phase Separator for 4wire, 440V overhead line (10span X 25 no/span=300 Nos:
98	Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

Tender For Pre-Monsoon Maintence Of 11Kv/3.3Kv,440V/220V Ohl With Erection , Dismantling And Shifting Of Poles At Different Projects Under Kuju Area., Ramgarh-Jharkhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us