|
| 1 | NOTE FOR ALL PAINITNG ITEMS :-The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit.(ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.(iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item.(v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. |
| 2 | NOTE FOR PLUMBING AND SANITARY ITEMS:-(i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.(iii) make specified in BOQ will supersede to all. |
| 3 | Dismantling of precast interlocking tiles/ paver blocks, chequered tiles of any description thickness & size complete all as specified and as directed. |
| 4 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. (below or above GL) |
| 5 | Material and labour for 25 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and as directed. |
| 6 | Material and labour for 75 mm thick PCC 1:3:6 type C2 and as in Plinth protection to prevent moisture from entering in building through its base complete all as specified and as directed. |
| 7 | Material and labour for 75 mm thick, PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in sub base complete all as specified and as directed. |
| 8 | Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006,with grey cement and pigment, rubber moulded tiles M-35 Grade as in floors, paving, path etc.complete all as specified and as directed. |
| 9 | Material and labour chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and as directed. |
| 10 | Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in copings, including weathering, slightly rounded or chamfered angles and throating, as directed as in copings, including form work complete all as specified and as directed. |
| 11 | Material and labour 100mm thick PCC type B2 (1:2:4) 40 mm graded stone agg in floor finished fair, even and smooth without using extra cement.as in hardstanding complete all as specified and as directed. |
| 12 | Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed. |
| 13 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed. |
| 14 | Material and labour for precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed. |
| 15 | Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed. |
| 16 | Material and labour preparation of newly plastered surface and applying two coat of cement base paint on wall along with primer, complete all as specified and directed. |
| 17 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces. |
| 18 | Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. |
| 19 | Material and labour for cement conc 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete all as specified and directed. |
| 20 | Material and labour for MS work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete all as specified and as directed. |
| 21 | Supply and fix, in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wirecomplete all as specified and as directed. |
| 22 | Dismantling chainlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as specified and as directed |
| 23 | Supply only chain link fencing using 3.15mm dia GI wire mesh and mesh opening 75mmx75mm and including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed |
| 24 | Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and as directed. |
| 25 | Supply and fix flat iron of size 50x3mm thick as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified and as directed. |
| 26 | Supply and fix 10mm dia and over round bars cut to length bent to shape for stiffeners etc and similar work complete all as specified and as directed. |
| 27 | Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long. |
| 28 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 29 | Supply and fix Strucural steel framed work as in doors or gates of angles or other sections with gusset plates, rails bracers etc. complete with fixing /hanging arrangenets as required confirming to Fe 290 gde E 165. |
| 30 | Supply and fixing mild steel plain black sheet in steel gates and similar work 1.60mm thick cut to size, holes punched: including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upo mitred angles, etc as required complete all as specified and as directed. |
| 31 | Dismantling of plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 32 | Supply and fix for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 33 | Supply and fix for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 34 | Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed |
| 35 | Supply and fix steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and directed. |
| 36 | Dismantling of Old Structural steel / wooden batten as in Post/Rafter/Purlin. |
| 37 | Material and labour preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed |
| 38 | Preparation of old plasterd or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed. |
| 39 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed |
| 40 | Complete removal of existing treatment including scrapping levelling & prepearing the surface of wall and applying two coat of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete all as specified and as directed.. |
| 41 | Wall care putty of 3 mm thick as in interior / exterior on wall / ceiling surfaces of any description finished smooth and even surfces complete all as specified and as directed. |
| 42 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white (lime) wash on ceiling complete all as specified and as directed. |
| 43 | Material and labour for preparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed. |
| 44 | Material and labour for preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and as directed. |
| 45 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed. |
| 46 | Material and labour for vitrified ceramic tiles 7-9 mm thick light shade, (square/rectangular) polished, area of each tiles exc 0.18 Sqm & not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 47 | Description all as per item no.46 above but as in skirting over, including 10mm thick plaster in CM(1:4) complete all as specified and as directed |
| 48 | Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 49 | Description all as per item no.48 above but as in skirting over, including 10mm thick plaster in CM(1:4) complete all as specified and as directed |
| 50 | Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar complete all as specified and as directed |
| 51 | Material and labour for Glazed ceramic coloured tiles in vertical surface 450 X350X7/350X250X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed |
| 52 | Material and labour for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed. |
| 53 | Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including complete all as specified and as directed. |
| 54 | Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each complete all as specified and as directed. |
| 55 | Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as specified and as directed. |
| 56 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed. |
| 57 | Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed |
| 58 | Supply and fix factory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 59 | Supply and fix 35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plainchamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed. |
| 60 | Supply and fix 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 61 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.complete all as specified and as directed |
| 62 | Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading complete all as specified and as directed. |
| 63 | Supply and fix in repairs Butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed. |
| 64 | Description all as per item no 29 above but Stainless steel butt hinges |
| 65 | Aluminium handles 150 mm long, cast type anodised complete all as specified and as directed. |
| 66 | Aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed. |
| 67 | Supply and fix for mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed. |
| 68 | Supply and fix for mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long complete all as specified and as directed. |
| 69 | Supply and fix for pressed steel door frames of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike platescomplete all as specified and as directed. |
| 70 | Description all as per item no 69 above but size 125 x 60 mm complete all as specified and as directed. |
| 71 | Material and labour for PCC 1:2:4 type B1 in door frame filling complete all as specified and as directed |
| 72 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall ccomplete all as specified and as directed |
| 73 | Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed |
| 74 | Removing existing stainless steel letters/signage of any size, fixed on wall including cutting of fixing studs, screws, bolts etc., without damaging the existing surface, making good disturbed portion of wall by cement mortar to match adjoining surface, complete all as specified and directed. |
| 75 | Supply and fixing of stainless steel letters, 6 inch height, made out of SS 304 grade, mirror / hairline finish as approved, thickness 1.2 mm, fixed with SS studs, spacers, screws and epoxy adhesive, complete all as specified and as directed at site.NOTE :- while quoting the rate for this item the rates will be deemed to be included for following measures:-i) Contractor should arrange all necessary scaffolding, staging for while execution of above work. All safety measures of labours strictly ensured by contractor while execution of work complete all as specified and as directed |
| 76 | Supply and fixing of stainless steel letters, 8 inch height, made out of SS 304 grade, mirror / hairline finish as approved, thickness 1.2 mm, fixed with SS studs, spacers, screws and epoxy adhesive, complete all as specified and directed at site.NOTE :- While quoting the rate for this item the rates will be deemed to be included for following measures:-i) Contractor should arrange all necessary scaffolding, staging for while execution of above work.All safety measures of labours strictly ensured by contractor while execution of work complete all as specified and as directed Please Enable Macros to View BoQ information |
