|
| 1 | NOTE FOR ALL PAINITNG ITEMS :-The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit.(ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.(iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item.(v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. |
| 2 | NOTE FOR PLUMBING AND SANITARY ITEMS:-(i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.(iii) make specified in BOQ will supersede to all. |
| 3 | Demolition of precast concrete block walling built in cement mortar as in manhole including PCC coping. |
| 4 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and as directed. |
| 5 | Material and labour for precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed. |
| 6 | Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 7 | Material and labour preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and as directed. |
| 8 | Dismantling of plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 9 | Supply and fix for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 10 | Supply and fix for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 11 | Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed. |
| 12 | Supply and fix steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed. |
| 13 | Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and as directed.. |
| 14 | Material and labour for cement conc 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete all as specified and as directed. |
| 15 | Dismantling of precast interlocking tiles/ paver blocks, chequered tiles of any description thickness & size complete all as specified and as directed. |
| 16 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. (below or above GL) |
| 17 | Material and labour for 25 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and as directed. |
| 18 | Material and labour for 75 mm thick PCC 1:3:6 type C2 and as in Plinth protection to prevent moisture from entering in building through its base complete all as specified and as directed. |
| 19 | Material and labour for 75 mm thick, PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in sub base complete all as specified. |
| 20 | Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006,with grey cement and pigment, rubber moulded tiles M-35 Grade as in floors, paving, path etc.complete all as specified and as directed. |
| 21 | Material and labour chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and as directed. |
| 22 | Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in copings, including weathering, slightly rounded or chamfered angles and throating, as directed as in copings, including form work complete all as specified and as directed. |
| 23 | Material and labour 100mm thick PCC type B2 (1:2:4) 40 mm graded stone agg in floor finished fair, even and smooth without using extra cement.as in hardstanding complete all as specified and as directed. |
| 24 | Preparation of old plasterd or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed. |
| 25 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed. |
| 26 | Providing and laying heavy duty vitrified tiles for hard standing, suitable for external use, load resistant, minimum thickness 10 mm, anti-skid surface, laid true to level and slope on cement mortar 1:4, including preparation of base, curing, joint filling with white/coloured cement slurry, and cleaning of surface, complete all as specified and as directed. |
| 27 | Material and labour for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed. |
| 28 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces. complete all as specified and as directed. |
| 29 | Material and labour for MS work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and as directed. |
| 30 | Dismantling chainlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as specified and as directed. |
| 31 | Supply only Chain link fencing using 3.15mm dia GI wire mesh and mesh opening 75mmx75mm and including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed |
| 32 | Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and as directed. |
| 33 | Supply and fix flat iron of size 50x3mm thick as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified and as directed. |
| 34 | Supply and fix 10mm dia and over round bars cut to length bent to shape for stiffeners etc and similar work complete all as specified and as directed. |
| 35 | Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and as directed.. |
| 36 | Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as complete all as specified and as directed. |
| 37 | Material and labour granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 38 | Material and labour 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 39 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. . |
| 40 | Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil complete all as specified and as directed.. |
| 41 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as complete all as specified and as directed. (below or above GL) |
| 42 | Material and labour for PCC 1:2:4 Type B-1 using 20 mm graded coarse aggregate in coping including necessary formwork and benching in bottom of manholes drain etc complete all as specified and complete all as specified and as directed.. |
| 43 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as complete all as specified and as directed. |
| 44 | Add or deduct for each 25 mm girth or part thereof over or under 30cm . |
| 45 | Returning, filling in hard / dense soil spreading, levelling, watering and well ramming in layers n. exc. 25 cm. |
| 46 | Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point. |
| 47 | Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggregate) in cover slab set in CM 1:6 complete all as specified and complete all as specified and as complete all as specified and as directed. |
| 48 | Material and labour for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 49 | Dismantling of Old Structural steel / wooden batten as in Post/Rafter/Purlin. complete all as specified and as directed. |
| 50 | Material and labour for Framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section to combined the windows completed all as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
