|
| 1 | POLISHINGM & L for preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with grinder machine, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed . |
| 2 | Bed hard |
| 3 | Chair dinning cushioned |
| 4 | Chair dinning |
| 5 | Chair writing |
| 6 | Chair easy |
| 7 | Table peg |
| 8 | Teapoy |
| 9 | Table centre |
| 10 | Table 900mmx600mm without drawer |
| 11 | Table 900mmx600mm with drawer |
| 12 | Table 900mmx900mm |
| 13 | Table dinning 1200mmx900mm |
| 14 | Table dinning 6 pers |
| 15 | Table dinning 8 pers |
| 16 | Sofa set 5 seater FD-281/373 |
| 17 | Sofa set 4seater FD-281 |
| 18 | M&L for repair Bed hard wdn by replacing the following unserviceable parts with first class teakwood complete all as per drawings and as directed.(DRG NO. FD-246/247) |
| 19 | Long rail. |
| 20 | Stiffener |
| 21 | Head rest |
| 22 | Foot rest |
| 23 | S& F 'L' shape MS flat iron 30mm x 5mm x125 mm long (painted with 1st grade black colour synthetic enamel paint over a coat of red oxide primer) between leg and rail to tight the whole frame complete. |
| 24 | S&F 3.5/4mm thick teak face plywood, including half round teakwood beading if broken, of both side of head rest complete. |
| 25 | S&F 3.5/4mm thick teak face plywood, including half round teakwood beading if broken, of both side of foot rest complete. |
| 26 | Plywood 12mm thick(9 ply) BWR Gde of suitable size. |
| 27 | M&L for repair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood. complete all as as per drawings and as directed.(Drg No FD/MAP-II/04,FD/E6/MAP/10(R))Note:- sample and shade of materials will be determined as per actual requirement at site.cost of rexine cloth shall not be less than 350/-per meter tapestry cloth shall not be less than 250/- per meter. |
| 28 | Front leg |
| 29 | Rear leg |
| 30 | Stiffener |
| 31 | Only tapestry cloth of seat complete |
| 32 | Vertical strip |
| 33 | Rexine cloth of seat complete |
| 34 | Foam 75mm (40 D) of seat complete. |
| 35 | Plywood 12mm thick (9 ply) MR gde |
| 36 | PVC shoe 15mm dia of approved quality |
| 37 | Canening :-Supply & Fixing for caneing with approved shade of plastic cane of 2 mm wide, 0.5 thick half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after with and including removing of wornout unserviceable cane complete all as specified and as directed. |
| 38 | Chair easy (seat)Note : Ref drawing No FD-17/201/229 |
| 39 | Chair easy (back) Note : Ref drawing No FD-17/201/229 |
| 40 | Chair writing Ref drawing No FD-20/202/250/280 |
| 41 | Bin soiled linen (both sides) Ref drawing No FD-212/252 |
| 42 | Stool dressing Ref drawing No FD-27/282 |
| 43 | Chair dining / Chair dinning MAPNote : Ref drawing No FD- 16/203/228/279 |
| 44 | Supplying and fixing Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. |
| 45 | Peg table (DRG NO. FD-384/277/236) |
| 46 | Teapoy (DRG NO. FD-382/278/232/34) |
| 47 | Table centre (DRG NO. FD-134/235/ 274/375) |
| 48 | Table 900mm x600mm without drawer/ With drawer (DRG NO. FD-283/224/284/231/223/ |
| 49 | Table 900mm x900mm (DRG NO. FD-291) |
| 50 | Table dinning (1200mm x900mm) (DRG NO. FD/MAP-II/03) |
| 51 | Table dinning 6 person(DRG NO. FD-273/239/30(M)/FD/MAP-II/03) |
| 52 | Table dinning 8 person (DRG NO. FD-273/239/30(M) |
| 53 | Table writing (DRG NO. FD-275/249/33(M) |
| 54 | Teapoy verandah (DRG NO. FD-255 /208/ 35 ) |
| 55 | Table steel with /without drawer (900mmx600mmx760mm)(DRG NO. FD-1007/1008 ) |
| 56 | Table 900mmx900mm Steel(FD-1009) |
| 57 | Table office clerks steel (DRG NO. FD-1004/381/307/84(M) |
| 58 | Table office officer (DRG NO. FD-1003/84(M) |
| 59 | M&L for repair Table dressing gents with mirror by replacing the following unserviceable parts complete as per drawing & as directed. (DRG NO. FD-230/31(M)) |
| 60 | Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11) duly provided teakwood beading infront of suitable size. |
| 61 | Bottom complete |
| 62 | Side complete. |
| 63 | Back ply of base made out of plywood 6mm thick( 9 ply) MR gde complete. |
| 64 | Only Mirror 5mm thick of suitable size. |
| 65 | Mirror with Frame made out of first class teakwood and 6mm thick MR Gde plywood complete. |
| 66 | Drawer complete. |
| 67 | M&L for repair Table dressing ladies with mirror by replacing the following unserviceable parts complete all as per drawing & as directed.(DRG NO. FD-251/32(M)) |
| 68 | Top made of 18/19mm thick MDF board |
| 69 | Bottom complete |
| 70 | Side complete |
| 71 | Back ply of base made out of plywood 6mm thick (9ply) MR gde complete |
| 72 | Only Mirror 5mm thick of suitable size |
| 73 | Plain glass 5 mm thick for sliding |
| 74 | Aluminium channel complete of suitable size for sliding of glass |
| 75 | Drawer complete |
| 76 | Leg with frame made out of first class teakwood |
| 77 | M&L for repair Side board by replacing the following unseviceble parts complete all as per drawing and as directed.(DRG NO. FD-241,371) |
| 78 | Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11) with approved shade duly provided first class teakwood beading infront of suitable size. |
| 79 | Bottom complete. |
| 80 | Side complete. |
| 81 | Partition complete. |
| 82 | Single shutter duly provided teakwood beading on edges complete. |
| 83 | Shelf 12mm thick complete. |
| 84 | Back ply 6mm thick MR gde. |
| 85 | Legs with frame made out from first class teak wood complete. |
| 86 | Drawer complete. |
| 87 | Supply & fixing for Cushion covers duly stitched with zip Sofa set 4 / 5 seater after with and including taking down of the existing unserviceable one complete all as specified and as directed. Note: Cost of cloth should not be less than Rs 300 RM |
| 88 | All as per item No 9 above but Foam cool density 40 of size 21\\"x22\\"x100 mm thick duly covered with white marking cloth and stiched all sides complete all as specified and as directed. Make : Kurlon or Sleepwell |
| 89 | M&L for preparation of old painted iron & steel surfaces (externally and internally complete) of following furniture items by scraping & rubbing down with grinder machine, removing dents and scratches if any filling the same with paste filler and applying two coat of synthetic enamel paint by spray equipment of 1st Grade quality,(Shade/colour shall be approved by engr-in charge) complete all as specified and directed . |
| 90 | Almirah largewith shelves steel, Almirah1/2H X 1/2S and almirah glazed |
| 91 | Almirah med/small steel with shelves. |
| 92 | Locker bedside steel. |
| 93 | Book shelf open large steel steel. |
| 94 | Bed Hard (MAP) |
| 95 | Teapoy Verandah Steel |
| 96 | Table computer MAP/TP |
| 97 | Shoe rack steel |
| 98 | M&L for repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones complete all as per the drawings and as directed.(DRG NO. FD-1031/ 67(M)) /FD/E6/MAP/18) |
| 99 | MS lock 6 lever with duplicate key. |
| 100 | Stainless steel handle 150mm long. |
| 101 | Complete internal locking device duly painted with one coat of red oxide primer. |
| 102 | Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. |
| 103 | Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. |
| 104 | Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. |
| 105 | M&L for repair Table bed side MAP by replacing the following parts with prelaminated MDF board(exterior gde)/plywood MR gde complete all as per drawings and as directed .(DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R)) |
| 106 | Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teakwood beading of suitable size. |
| 107 | Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side complete. |
| 108 | Back made out of plywood 6mm thick MR Gde. |
| 109 | Bottom made out of plywood 6mm thick MR Gde. |
| 110 | Upper drawer complete. |
| 111 | Lower drawer complete. |
| 112 | CP handle of approved qulity and suitable size. |
| 113 | Telescopic channel of suitable size and approved quality. |
| 114 | M&L for repairs Chair executive revolving high back by replacing unserviceable parts as per drawings/ TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter and Cost of rexine cloth shall not be less than 350/- per meter . |
| 115 | Only tapestry cloth of seat and back complete. |
| 116 | Only rexine cloth of seat and back complete. |
| 117 | Foam of seat/ back complete. |
| 118 | Only Plywood of seat /back. |
| 119 | Hydraulic of suitable size. |
| 120 | Base CP as reqd of suitable size and pattern |
| 121 | Wheel of suitable size and pattern. |
| 122 | Arms as requred by size and design(spl). |
| 123 | Stainless steel padestal assembly complete |
| 124 | M&L for repairs to Chair revolving med/ low back by replacing unserviceable parts as per drawings/TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter and Cost of rexine cloth shall not be less than 350/- per meter . |
| 125 | Only tapestry cloth of seat and back complete. |
| 126 | Only rexine cloth of seat and back complete. |
| 127 | foam of seat/ back complete. |
| 128 | Only Plywood of seat /back. |
| 129 | Hydraulic of suitable size. |
| 130 | Base CP as reqd of suitable size and pattern |
| 131 | Wheel of suitable size and pattern. |
| 132 | Arms as requred by size and design. |
| 133 | Stainless steel padestal assembly complete |
| 134 | M&L for repair to Chair computer revolving by replacing unserviceable parts as per drawings/TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter. |
| 135 | Only tapestry cloth of seat and back complete. |
| 136 | Foam of seat/ back complete. |
| 137 | Only Plywood of seat /back. |
| 138 | Base Stainless Steel pedestal assembly complete |
| 139 | Hydraulic of suitable size. |
| 140 | Wheel of suitable size and pattern. |
| 141 | Arms as requred by size and design. |
| 142 | M&L for repair Chair writing Map by replacing unserviceable parts as per drawing complete all as specified and directed.(DRG NO. FD/E6/MAP/12).Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 150/-per meter. |
| 143 | Only tapestry cloth of seat and back complete. |
| 144 | foam of seat/ back complete. |
| 145 | Only Plywood of seat /back. |
| 146 | Arms as requred by size and design. |
| 147 | M&L for repair to Chair visitor by replacing unserviceable parts as per drawings/TP complete all as specified and directed.Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of rexine cloth shall not be less than 350/-per meter and .Cost of tapestry cloth shall not be less than 150/-per meter. . |
| 148 | Only tapestry cloth of seat and back complete. |
| 149 | Only rexine cloth of seat and back complete. |
| 150 | foam of seat/ back complete. |
| 151 | Only Plywood of seat /back |
| 152 | Removing unsv plywood from Charpoy plytop and providing 12mm thick (9 ply) plywood BWR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade.Rest all as per drawing & as directed by engr-in-chage.(DRG NO. FD/MAP/-II/01) |
| 153 | Removing unserviceable plywood from Charpoy folding and S&F 10mm thick plywood MR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade complete all as specified and directed.(DRG NO. FD-388(R) ) |
| 154 | Removing unserviceable plywood from Charpoy GI Pipe and S&F 12 mm thick (9 ply) plywood of BWR Gde duly teakwood beading 12mm thick half round dia all around of suitable size fixed by pannel pins and adhesive with diamond cut pattern finishing at corner and fixing with suitable size of nut,bolt and washer to frame after titening of complete frame including welding of loose joints,if any and painting of flat/angle iron by brush with one coat of 1st quality synthetic enamel paint of approved shade complete all as specified and directed.(DRG NO. FD-220 ) Note:- shape,pattern and size of nut, bolt and washer shall be approved by GE. |
| 155 | M&L to repair Table computer by replcing the following unseviceable parts all as per the drawings and as directed by engr-in-charge. (DRG NO.FD/E6/MAP/03,TP) |
| 156 | Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with PVC beading of as requaired complete. |
| 157 | Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side. |
| 158 | Board drawer complete |
| 159 | Mouse drawer complete |
| 160 | Middle shelf complete |
| 161 | Bottom shelf complete |
| 162 | Telescopic channel of suitable size and approved qualityNote:- Sample and shade of materials will be determined as per actual requirement at site. |
| 163 | M&L for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with two coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.8 thick plastic cane made out of virgin plastic, in existing pattern complete all as specified and directed.( Drg No. FD-359/259/256/19 ) |
| 164 | S&F hard rubber shoe of approved quality suitable for chair verandah complete all as specified and directed. |
| 165 | M&L for repair bed hard MAP by replacing the following unserviceable parts with approved ones complete all as per drawing and as directed.(DRG NO. FD/E6/MAP/08,FD/E6/MAP/08®) |
| 166 | Plywood top 12mm(9 ply) thick MR Gde. ISI Mark Century/Green Ply/Kitply |
| 167 | Nut and bolt with washer complete. |
| 168 | Pre-laminated MDFboard(exterior gde) of Head rest complete. |
| 169 | Pre-laminated MDFboard(exterior gde) of foot rest complete. |
| 170 | PVC cap of suitable size. |
| 171 | M&L for repair Chair dining by replacing the following unserviceable parts with first class teakwood complete all as per drawing and directed. (DRG NO. FD-279/270/228/203 FD/MAP-II/05 ) |
| 172 | Front leg. |
| 173 | Rear leg. |
| 174 | Stiffener. |
| 175 | Rail. |
| 176 | PVC shoe 15mm dia of approved quality. |
| 177 | Back rest. |
| 178 | M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge.(DRG NO. FD-229/201) |
| 179 | Front Leg |
| 180 | Rear Leg |
| 181 | Rail. |
| 182 | PVC shoe 15mm dia of approved quality. |
| 183 | M&L for repair Chair writing by replacing the following unserviceable parts with first class teak wood complete all as per drawing & as directed.(DRG NO. FD-280/250) |
| 184 | Front leg. |
| 185 | Rear leg. |
| 186 | Stiffener. |
| 187 | Rail. |
| 188 | PVC shoe 15mm dia of approved quality. |
| 189 | M&L for repair fully uphostry sofa set 5 seater cladded with tapestry cloth by replacing tapesty cloth of approved quality including replacement of unserviceable material like cotton,coir,foam,GI spring, wooden members etc. and polishing the exposed surface of the same with high gloss finish of french polish complete all as per drawing/ TP and as directed.Note:-(i) Sample and shade of material will be determined as per actual requirement at site.(ii) Cost of tapestry cloth shall not be less than 350/- per meter. Please Enable Macros to View BoQ information |
