Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I. |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B) |
| 3 | Earth Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per build |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5M all complete as per build |
| 5 | Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) |
| 6 | Providing designation 75B one Brick Flat Soling joints with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8(1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:1.5:3 (1 Cement : 1.5 coarse sand zone(III): 3 graded stone aggregate 20mm nominal size) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 12 | Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand (zone III):4 graded stone aggregrate 20 mm nominal size ) |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Centering and shuttering including strutting propping ,etc and removal of forms for stairs ( excluding landing ) expect spiral -staircases |
| 15 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 17 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for : weather shade,chajjas,corbel,etc |
| 21 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for :Stairs (Excluding landing) except spiral staircase |
| 23 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 25 | Providing TMT reinforcement of 8mm dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 26 | Providing TMT reinforcement of 10 mm dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 27 | Providing TMT reinforcement of 12 mm, dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 28 | Providing TMT reinforcement of 16 mm dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 29 | Providing TMT reinforcement of 20-25 MM dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 30 | Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\" x 4.5\\" x 3\\") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Providing designation 112mm thick reinforcement designtion 100 brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3) in C.M.(1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty (but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I. |
| 32 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 33 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I. |
| 34 | Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 35 | Providing 250mm wide brick drain cement morter (1:6) with av.150mm clear depth and 250mm apron including cost of eartwrk involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duty plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/Ι. |
| 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 37 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 38 | Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with. brush, roller or spray for water proofing coating as per manufacturer specifications with following steps: (a)surface preparation :-Providing and cleaning of concrete surface toremove dust, oil, grease including removal of existing loose paint /coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt.Ltd. / MYK Schomberg Dr Fixit/Fosroc or equivallent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm X 150 mm fillet of mortar (Cement: sand 1:4) admixed with acrylic polymer of Sika/Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.(b)1st Coat :- Apply 1st coat of two component acrylic modified, ready touse, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application, 45 gsm of Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/Sqmt/coat. For the purpose of measurement the entire treated surface will be measured.\\" (Product Performance Chemical Base Part A: Acrylic copolymer, Part B: Specially graded cementitious powder -Density 1.6 kg/l (mixed density) at +27°CTensile Strength -2 N/mm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength ~2 N/mm2 (concrete failure) (According to ISO 4624) Slant-Shear Bond Strength ~4 N/mm2 (According to FIP 5.15) Elongation at Break -35% without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370. (c) 2nd Coat :-To apply the 2nd coat of two component acrylic modified, ready to use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/Sqmt/coat. For the purpose of measurement the entire treated surface will be measured.\\"\\" After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Water proofing Brand:-Sika Topseal 109hi Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2K/MYK (d) Protection of treated surface with PCC :- The treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) towards the rain outlets in alternatepanels of 2 mt x 2mt keeping 6 mm gap between the panel joint. Integral water proofing admixture conforming to IS 2645 @ of 100 ml per bag of of cement to be added in the screed concrete (paid separately for this items). All corners shall be chamfered with 150mm X-150 mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of Sika India Pvt.Ltd./MYK Schomberg / Dr Fixit/Fosroc. For the purpose of measurement the entire treated surface will be measured(e) Groove of PCC surface should be filled with Polysulphide Sealant. (Paid Separately). Brand Sika India Pvt.Ltd. / MYK Schomb |
| 39 | Covering of treated surface with PCC :-providing 25 mm thick Cement Concrete M20 (1:1:5:3) maintaining slope in alternate 2 mt x 2mt panels With approved quality of stone chips of 20mm to 6 mm size graded and Cleaned sand of F.M.2.5 to 3 including screening, shuttering, and mixing Cement concrete in mixer with admixture of integral water proofing and Placing in position, striking curing, taxes and royalty all complete as per Building specification and direction of E/I. Panels that has been left should Be casted next day. There should be 6 mm gap between panels .brand- Sika _ plastocrate plus, MYK proof WP 10, Fosroc- Conplast X 421 ic Dr Fixit Pidiproof LM+ |
| 40 | Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysuiphide Sealant (Porin.g Grade)as per drawings and technical specificationsi6nd direction of E in Charge. (with 18% GST) B rand Sika Polysulphide, Fosrpc-Thioflex 600 Dr. Fixit Pidiseal PS(42P. MY K Seal PS or Euivalent. |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufactured over plaster wall surface to prepare the surface even and smooth |
| 42 | Providing one coat of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 43 | Providing two coats of oil bound distemper of approved shade and make over a coat cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 44 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1: 4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm -including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Glazed virtified tiles Matt/Antiskid finish of size ,Size of Tile 600 x 600 mm |
| 45 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1: 4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm -including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Glazed virtified tiles Matt/Antiskid finish of size ,Size of Tile 600 x 600 mm |
| 46 | Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortaR (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 47 | Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 48 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by manufacturer) of approved mack, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement moter 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry 2 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 49 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 50 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 51 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 52 | Supplying fitting and fixing 35mm thick soild core type decorative single leaf flush door shutter with both sides decorative veneered with bblack board core bended with high quality phenol formal depydes synthetic resine of standard make with alumiclum fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I |
| 53 | Providing and fixing aluminium hanging floor door stopper, Isi marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc, complete. |
| 54 | Supplying and fixing fan hook of 16mm dia MS. Bar 1 meter long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all cmplete as per building specification and direction of E/I. (where materials is not supplied by |
| 55 | Supplying fitting and fixing M.S. Grill made of 20x6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt |
| 56 | Supply fitting and fixing fully glazed steel door, window or ventilations of standard folled 'z' and mullion steel sectins and size as per IS-1038 joints met and welded with 100x16x3mm M.S. Lugs fixed cement concrete (1:2:4) block 15x10x10CM, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.L. counter sunk machine screw and nuts and |
| 57 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium snapbeading for glazing/ paneling, CP. brass/stainless . All complete as per architectural drawing and direction of engineer in charge Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 58 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/shall be paid for separately)powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 59 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8.0 mm thickness |
| 60 | Steel work welded in built up sections/framed and applying a priming, hoisting, fixing in position and applyinga priming, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all completeIn gratings, frames, grard bar, ladder, railings, brackets, gates and similar works |
| 61 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I(Mode of measurement area shall be |
| 62 | providiing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 63 | Providing and fixing on wall face unplasticisd Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, LEAVING 10MM gap for thermal expansion, single socketed pipes110 mm Rain water pipe |
| 64 | providing and fixing oo wall face unplascised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A,including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm |
| 65 | providing and fixing oo wall face unplascised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A,including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. BEND110 mm |
| 66 | providing and fixing oo wall face unplascised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A,including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. SHOE 110 mm |
| 67 | Providing and Fixing factory made Upvc door frame, made of Upvc exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm ($ 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, rcinforcing hinge side vertical of the frames with PVC profile of size 28 mm x 30 mm having wall thickness 2 mm ($0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jumb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge. |
| 68 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 69 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 granms per sqm as per IS: 277, in 240 mpa steel grand, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective grard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lenth upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape where required. |
| 70 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (bace metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:RIDGES PLAN (500-600 mm |
| 71 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 72 | Supplying, fitting and fixing 20mm dia M.S. Bar 1 meter long holding down bolt with nuts washers 100 x100 x6mm plate fitted and fixed with cement concrete (1:24) as per approved design all complete as per building specification and direction of E/L. |
| 73 | Supply & Installation Specification of Wooden flooring Surface board - \\"RICOCHET SPORTS\\" BWF Approved TEAK/HEVEA/MAPLE WOOD SPRTS FLOORING finishing with 21mm thick, 53 to 93 mm wide and in random length in tongue and groove shape. The edges of the boards should have finger lock groove and the bottom side with air pass groove The under frame- Made of pine wood runners of 70mmx45mm, treated with anti-termite solution and fixed on the |
| 74 | pvc sport flooring for badminton court:100 % pvc +glass fibre +imported fabric mesh Specification of vinyl flooring a) Thickness-4.5 mm b) roll size-15 x1.8 mtr ( 4 roll per court) Warranty 5 year |
| 75 | Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium sillicate false ceilling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including bothNote:- Only calcium silicate false ceiling area will be measured from wall to wall. No dedcuction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calclum silicate ceilling tile shall have NRC value of 0.50 (Minimum), light refletion> 85%, non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mk. |
| 76 | Local sand (13 km) |
| 77 | Sand (Lead 49 km ) |
| 78 | Chips lead 22 KM |
| 79 | Stone Metal (22 km) |
| 80 | Bricks ( lead 8 km) |
| 81 | Earth ( lead 1 km) |
| 82 | Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sqmm FR PVC insulated copper conductor single core in surface / recessed PVC conduit, with modular switch, modular plate suitable Gl box etc as required. GROUP A |
| 83 | Twin Control point wiring in PVC conduit, with modular type switch:-Wiring for Twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, 2 way modular type switch, modular plate, sutiable size G.I box etc as requried |
| 84 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 Sqmm + 1x1.5 sqmm earth wire |
| 85 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x2.5 Sqmm + 1x2.5 sqmm earth wire |
| 86 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x4.0 Sqmm + 1x4.5 sqmm earth wire |
| 87 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x10 Sqmm + 1x10 sqmm earth wire |
| 88 | 75 mm x 75 mm x50 mm deep / (4\\" x 4\\") |
| 89 | 72 mm x 146 mm x 48 mm deep /(4\\" x 7\\") |
| 90 | 210 mm x 206mm x 48 mm deep /(10\\" x 12\\") |
| 91 | Maximum 12W, High efficient recess mounted LTD round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP40, Ambient temp-0 to 45 DegC, CCT-4000K, 50,000 hrs @ L70 life. Driver efficiency>85%, |
| 92 | 9 \\" (230 MM ) metal exhaust fan |
| 93 | Bulk head fitting 9/10 Wtt cfl/LED |
| 94 | Supplying and fixing 2 pin 5 amp. Ceiling rose on the existing junction box / wooen block including connection etc. as required. |
| 95 | S/F Batten holder-Supplying and fixing battrn/holder including connection |
| 96 | ITC celling fan :- installatin, testing and commissioning of celling fan, including wiring the down rods of standerd leanth 9upto 30 mm) with single core cable etc. as requried |
| 97 | ITC Exhaust fan upto 450 mm. sweep:- Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the holeto suit the size of the above fan, making good the damage, connection, testing, commissioning etc as required. |
| 98 | S/F Modular type switch/socket :- Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried.5/6 amps, 3 pin socket outlet |
| 99 | S/F Modular type switch/socket :- Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried.5/6 amps ONE WAY SWITCH |
| 100 | S/F 'C' Serise, MCB:- Suppling and fixing, 240 volts \\"C\\" serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB cobplete with6/32 amps, single pole |
| 101 | S/F 'C' Serise, MCB:- Suppling and fixing, 240 volts \\"C\\" serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB cobplete with40amps , DP |
| 102 | S/F S.P. MCB DB : Supply and fixing followng way single pole nutral, sheet, MCB dstribution board, 240 voilts, on surface/recess, complete with tinned copper busbar, nutralbusbar, earth bar, din bar, detachable gland plate, interconnection, phospate and powder painted including earthing8 way, single door |
| 103 | S/F S.P. MCB DB : Supply and fixing followng way single pole nutral, sheet, MCB dstribution board, 240 voilts, on surface/recess, complete with tinned copper busbar, nutralbusbar, earth bar, din bar, detachable gland plate, interconnection, phospate and powder painted including earthing8 way, single door |
| 104 | S/F Modular type Electronic Fan Regulator-Supplying and fixing following modular connection but modular plate and switch box including typelectronic RAN Regulator- on the existing |
| 105 | S/F Modular type blanking plate:- Supplying and fixing modular blanking plate on the existing modular plate and switch box exculiding modular plate etc. as requried. |
| 106 | S/F SP MCB blanking plate:- Suppling and fixing single pole blanking plate inexisting MCB DB complete etc. as required. |
| 107 | S/F HRC fuse type TP&N switch disconnector:-providing and fixing following capacity doble pole/TP/N sheet metal switch disconnector fuse unit in existing metal board, with ISI marked HRC fuses, including drilling holes in metal board, making connections, etc as requried. 400 amps,tp&n ,hrc |
| 108 | S/F Panel montude change over:- Providing and fixing following capacity 4 pole panel mounted change over switches in existing cubcile panel board, making connection earthing the body....400 amps,4 pole |
| 109 | S/F Busbar chamber:- Providing and fixing following capacity busbar chamber with 4 stripe of sutiable size made of copper, heavy duty, complete with all accessories including connections, earthing the body, etc as requried. 400 amp |
| 110 | S/F HRC fuse type TP&N switch disconnector:-providing and fixing following capacity doble pole/TP/N sheet metal switch disconnector fuse unit in existing metal board, with ISI marked HRC fuses, including drilling holes in metal board, making connections, etc as required200 amps, TP&N, HRC |
| 111 | S/F S.P. MCB DB:- Supplying and fixing following way single pole nutral, sheet, MCB dstribution board, 240 volts, on surface/recess, complete with tinned copper busbar, nutralbusbar, earth bar, din bar, detachable gland plate interconnacetion4Way (4+12), Single door, Horizontal type |
| 112 | S/F 'C' Serise, MCB:- Suppling and fixing, 240 volts \\"C\\" serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB complete with connections, testing and50/63 amps TPN |
| 113 | S/F rewireable double pole / TP&N switch disconnector:- providing and fixing following capacity doble pole/ TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried.16 amps, double pole |
| 114 | Copper earth plate electrode:- Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclours with cover plate having locking arrangrment and watering pipe etc, as requried (But with out charcoal or cock and salt |
| 115 | S/L 8 SWG copper wire in ground:- Suppling and laying 8SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldring as requried. |
| 116 | S/L 25mmx 6mm G.I. earth strip in ground:-Supplying and laying 25mm x6mm G.I. strip at 0.50 metre below ground as strip earth eletrode |
| 117 | P/F G.I. lighting conductor finial:- Providing and fixing of lighting conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85 mm dia 3 mm thick G.I. base plate including holes etc as rqquried |
| 118 | Reverting sweating and soldring lighting conductor tape:-Reverting sweating and soldring of copper/G.I. tape (with another copper/G.I. tape, base of the final or any another metalic object) as requried |
| 119 | P/F G.I. lighting conductor tape in vertical run:-Providing and fixing G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as requried. (for horizontal run |
| 120 | P/F Testing joint for G.I. lighting conductor:-Providing and fixing testing joint, 20 mm x 3 mm thick copper strip 125 mm long, with 4 nos. of G.I. bolts, nuts, check nuts and spring washers etc. complete as requried |
| 121 | P/F coppre earth tape for lighting conductor:-Providing and laying copper tape 32 mm 6 mm from earth electrode directly in ground as requried. |
| 122 | 70 sqm mm,3.5 core |
| 123 | 35 sq-mm ,3.5 core |
| 124 | MV cable laying up to 35 sq.mm in ground:-Laying of 1 number PVC insulated PVC sheathed /XLPE power cable of 1.1 K V grand of size not exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushioning,protective covering and refilling |
| 125 | MV cable laying up to 95 sq.mm in ground :-Laying of 1 number PVC insulated PVC sheathed /XLPE power cable of 1.1 KV grand of following size direct in ground including excavation, sand cushioning protective covering and refilling the |
| 126 | Supply of 48 \\" (120 mm) AC Ceiling fan |
| 127 | 20/22 watt Led tube light |
| 128 | 15/16 LED BULB |
| 129 | 30 W LED FLOOD LIGHT |
| 130 | 50/60 W LED FLOOD LIGHT |
| 131 | PANEL ANALLYSIS |
| 132 | 4 pole MCCB 160 A, 35 KA With fixed thermal magnetic |
| 133 | 4 pole MCCB 63 A, 16 KA With fixed thermal magnetic |
| 134 | 5 pole MCCB 63 A, 16 KA With fixed thermal magnetic |
| 135 | 4 Pole MCB 40 A, 16 KA with fixed thermal magnetic |
| 136 | 63 a,DP |
| 137 | 50/63 A DP |
| 138 | 16 A Socket + Switch |
| 139 | 200 amp 415 V heavy duty three phases with neutral bus bar chamber |
| 140 | LED Indicator switch |
| 141 | 3 way 4 pole selector switch |
| 142 | DIGITAL , Volt MTR (0-500V) 3 phase 0.5 |
| 143 | DIGITAL , AMP MTR (0-500AMP) 3 phase 0.6 |
| 144 | C.T, Coil of CT ratio 200/5 IS2705 part 3 |
| 145 | 160 amp 415 Heavy duty three phases with Neutal bus |
| 146 | Supplying, installation, testing and commissioning of cubical type MV panel made out of 14 SWG sheet steel, totally enclosed IP-54 Protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with minseven tanks) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 50mmx50mmx5mm (thick), Fabrication shall be done in transportable section, entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable |
| 147 | Earth in excavation (As per I.S. 3114/1965 for laying of different types and sizes of pipe so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(a) For classification of soil item-A(200 X0.6X0.6) |
| 148 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification for Soil itim-A&B |
| 149 | Supplying and fixing male ended 15mm dia brass bib cock of approved quality (wt.not less than 350 grms) with extra socket all complete as per specification and direction of Ε/Ι |
| 150 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of Ε/Ι.BRASS STOP COCK15 mm dia |
| 151 | Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of Ε/Ι. 32 mm and weight not iess than 700 gms. |
| 152 | Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of Ε/Ι. 40 mm and weight not iess than 1 kg |
| 153 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., \\"p\\" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.580mm. long - with 10 litre low level PVC cistern |
| 154 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of \\"Hindustan\\" \\" Parry\\" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight notless than 450 gm,15 mm P.V.C alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l FLat back of standing corner (450 mm x 350 mm) |
| 155 | Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I EWC with ' s ' Trap (b) 10 lt low level P.V.C Cistern |
| 156 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 157 | Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/L(i) 125mm thick wall |
| 158 | Making holes in walls for laying H.C.I. pipes and restoring the same after pipe laying as per specification and direction of E/L(i) 250mm thick wall |
| 159 | piller Cock (Long Neck) (for basin |
| 160 | 4 way diverter for concealed fitting |
| 161 | Towel rail 24\\" |
| 162 | Tumbler Holder |
| 163 | Toilet paper holder |
| 164 | Glass shelf 22 ' |
| 165 | Earth work in excavation for laying of different types of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C.spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(for classification of soil items A) |
| 166 | Labour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, red light and barrier etc. all complet as per specification and direction of E/I.150 mm dia pipe |
| 167 | Supplying labours, tools and tackles for testing of laid, R.C.C. spun pipes upto specified lead water all complete as per specification and direction of E/I. (water to be supplied free of cost departmentally),225mm dia |
| 168 | Supplying materials and labours for constructinginspection chamber of designation class 75B bricks size 750mm deep, 600x 450mm internal dimension having 250mm wall thickness in cement morter (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction |
| 169 | Supplyinglaying fitting and fixing NP 2 R.C.C spun pipes all complete as per specification |
| 170 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes |
| 171 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes |
| 172 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 173 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes |
| 174 | Providing and fixing PTMT grating of approved quality and colour. Circular type-100 mm nominal dia |
| 175 | Providing and fixing PTMT grating of approved quality and colour. Circular type-125 mm nominal dia with 25 mm waste bore |
| 176 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/1.Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. (b) hinges to fix with mirror600mm x 450mm size |
| 177 | Polythene water storage tank of ISI mark (eg sintex /Sinter/himgiri/gangotri etc with cover & locking system |
| 178 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes 110 mm Rain pipe |
| 179 | Coupler -110 mm |
| 180 | Bend 110mm |
| 181 | shoe-110 mm |
| 182 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item - A0 and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I. |
| 183 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B) |
| 184 | Providing coarse clean Sand in Filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 185 | Providing designation 75A brick work in C.M. (1:6) in foundation and plinth approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes an |
| 186 | 1:3:6 (1 Cement : 4 coarse sand (zone-III) : 8 graded stoneaggregate 40 mm nominal size) |
| 187 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 188 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 189 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 190 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and accessplatform |
| 191 | Providing TMT reinforcement of 10 mm dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 192 | Providing TMT reinforcement of 12 mm dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 193 | Providing designation 75 B one brick flat soiling filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I |
| 194 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 195 | Providing 1.5mm cement punning including curing, carraige of water with all leads and lifts as per building specification and direction of E/I. |
| 196 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 197 | Local sand (13 km) |
| 198 | Sand (Lead 49 km ) |
| 199 | Chips lead 22 KM |
| 200 | Bricks ( lead 8 km) |
| 201 | Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M to 50.00 M below G.L. |
| 202 | Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (B) From 51 M to 100 M below G.L. |
| 203 | Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (B) From 51 M to 100 M below G.L. |
| 204 | Supplying assembling, lowering and fixing in vertical position in bore well, unplasticized PVC MEDIUM WELL CASING (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories ets. All complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia |
| 205 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 206 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 207 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 208 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP |
| 209 | Supply fitting and fixing of standered mackstarter pannel Board with arrangement of all necsssury protection including all taxes, royalty etc all complete job as per direction of E/I. |
| 210 | Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX/HEVELS make including all taxes, royalty etc all complete job as per direction of E/I. |
| 211 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling 7 testing of joints complete as per direction of Engineer in Charge.50 mm nominal outer dia pipes |
| 212 | Labour for site clearance before and after work etc |
| 213 | Sand filling in foundation trenches as per drawing and technical specification. |
| 214 | By Mix in Place Method (Construction of granular sub-base by providing close graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC and compacting with vibratory power roller to achieve the desired density, complete as per clause 401)ii) for grade II material |
| 215 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over bed as per relevant IRC code, filling the joints with fine sand etc. all complete as per the direction of Engineer-In- Charge. |
| 216 | Cast in situ cement concrete M20 Kerb(Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively ,250 mm high in M20 grade pcc on M-15 grade foundation 150 mm thick,foundation having 50 mm projection beyond kerb stone,kerbstone laid with kerb laying machine ,foundation concrete laid manually,all complete as per clause 409) |
| 217 | 1:11/2:3 (1 cement:11/2 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)For packing of paver block |
| 218 | Local sand (13 km) |
| 219 | Sand (Lead 49 km ) |
| 220 | Chips lead 49 km |
| 221 | Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 222 | Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 223 | Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195cm. in gunny bag of size 30 cm as per direction of the officer-in-charge. |
| 224 | Providing, stacking and Displaying Dracaena ‘Song of India’ specimenplant (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot / Plastic pot andas per direction of the officer-in-charge. |
| 225 | Providing and stacking of Foxtail palm ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bag as per direction of the officer-in |
| 226 | Providing and stacking Duranta Golden, having ht. 15 cm to 20 cmbushy shape with fresh and healthy leaves in 15 cm size of Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge. |
| 227 | Providing, stacking and Displaying Ixora singaporensis different colour having 30 cm and above ht., well developed with fresh & healthy foliage with bloom in 25 cm Earthen Pot/Plastic Pot and as per direction ofthe officer-in-charge |
| 228 | Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pot of size 25 cm as per direction of the officer-in-charge |
| 229 | Providing, stacking and Displaying Acalypha red well developed with fresh & healthy 30 cm to 45 cm ht. plant in 20 cm size Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 230 | Providing and stacking of Plumeria acutifolia height 120-135 cm. with 2-3 branches in HDPE bag size 30 cm as per direction of the officer-in-charge |
| 231 | Providing and stacking of Plumeria acutifolia height 120-135 cm. with 2-3 branches in HDPE bag size 30 cm as per direction of the officer-in-charge |
| 232 | Providing and stacking of Ficus benjamina (green) height 120-135 cm. with 6-8 branches and lush green foliage in gunny bag size 25 cm as per direction of the officer-in-charge. |
| 233 | Providing and stacking Syngonium variegated,of height 30 cm to 45 cm. with 2 to 3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 15 cm and as per direction of the officer-in-charge |
| 234 | Providing and stacking Cuphea chinensis of ht. 20 cm to 30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot / Plastic Pot and as per direction of the officer-in-charge |
| 235 | Providing, stacking and Displaying Dieffenbachia Mosaic having ht. 30 cm to 45 cm with 10-12 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot and as per direction of the officer-in-charge |
| 236 | Providing and stacking of Polyalthia pendula (Ashok Pendula) height180-195 cm. in gunny bag size 30 cm as per direction of the officer-in-charge. |
| 237 | Providing, stacking and Displaying Croton Challenger variety having ht. 30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot and as per direction of the officer-in-char |
| 238 | Providing, stacking and Displaying Petunia hybrid well developed with fresh & healthy foliage in full bloom 6 to 8 plants in 35 cm Earthen Tray/ Nand and as per direction of the officer-in-charge. |
| 239 | Providing, stacking and Displaying Salvia ht. 45 to 60 cm multi branches stacking with bamboo stick specimen type with full bloom well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge |
| 240 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge |
| 241 | Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pot/ Plastic pot as perdirection of the officer-in-charge |
| 242 | Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in 20 cm size of Earthen pot / Plastic pot as per direction of the officer-in- charg |
| 243 | Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of officer-in-charge.Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 m |
| 244 | Add 18% GST (In Basic Rate must fill 18) |
| 245 | Add 1% Labour Cess (In Basic must Rate fill 1) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
