Tender For [10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 With Stone Aggregate 40 Mm Size In Foundation And Plinth. [Through Rate] , [11.52]Cement Rendering On Plaster 1 Mm Thick [Through Rate] , [11.6.1]15 Mm Cement Plaster On T

Sharing tender

Tender for [10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 With Stone Aggregate 40 Mm Size In Foundation And Plinth. [Through Rate] , [11.52]Cement Rendering On Plaster 1 Mm Thick [Through Rate] , [11.6.1]15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1. 1:4 (1 Cement: 4 Fine Sand) [Through Rate] , [21.28]Providing And Fixing Steel Bar Embedded Plastic Steps Of Size 263Mm X 165Mm Of Orange Colour, Confirming To Specification In Pump Chambers, Manholes Etc., Having Minimum 3Mm Thick Polypropylene Polymer Confirming To Is:10910 Encapsulated On 12Mm Dia Ribbed Steel Bars Per Is :1786. The Rate Include Cost Of Setting The Same To Correct Lines And Levels Duly Embedded In 1:2:4 Cement Concrete Including Carriage, Loading, Uploading, Stacking, Handling, Re-Handling Etc., Complete In All Respect To The Satisfaction Of Engineer-In-Charge [Through Rate] , [21.43]Extra Over The Rate Laid Down In This Schedule For Cement Concrete Work More Making And Finishing Benching And Complicated Floor Work In Manholes, Including Formation Of Channels And Bulldozing And Smooth Finishing The Surface Accurately To Template. [Through Rate] , [21.57.1.4]Providing Masonry Plugs To Ends Of Sewers Of All Types With 11.43 Cm Thick Brick Wall In Cement Sand Mortar 1:7 With 12 Mm Thick Cement Plaster 1:6 (As Required By The Engineer-In-Charge). 1.4. For Circular Sewers Having Internal Diameter - 200 Mm [Through Rate] , [21.93.1]Providing And Fixing Steel Fibre Reinforced Concrete Manhole Covers And Frames Marked With Is: 12592 Including Setting The Same To Correct Lines And Levels In 1:3 Cement Sand Mortar Over Manhole Including Carriage Loading Unloading Stacking Handling Re-Handling Etc. Complete In All Respects To The Satisfaction To The Engineer-In-Charge. 1. Type:- Extra Heavy Duty Set (Ehd-35) 560Mm Clear Opening [Through Rate] , [21.94.3]Providing Salt Glazed Stone Ware Pipes Grade ‘A In Standard Length Of 600 Mm Each Pipe Marked With Is: 651 And Their Lowering, Cutting, Jointing And Testing As Described In Item No. 21.38, 21.39, Item 21.40 Including The Cost Of Jointing Materials As Well As Carriage, Loading, Unloading, Stacking, Handling, Re-Handling Etc. Complete In All Respects To The Satisfaction Of Engineer-In-Charge. 3. 200Mm I/D [Through Rate] , [4.14.1]Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 1. All Kinds Of Soil. [Through Rate] , [4.19.1.2]Excavating Trenches Of Required Width For Pipes, Cables, Etc, Including Excavation For Sockets, Depth Up To 1.5 M, Including Getting Out The Excavated Materials, Returning The Soil As Required In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layers By Ramming, Watering Etc., Stacking Serviceable Material For Measurements And Disposal Of Unserviceable Material As Directed, Within A Lead Of 50 M : 1.2. Ordinary Rock : Pipes, Cables Etc. Exceeding 80 Mm Dia But Not Exceeding 300 Mm Dia [Through Rate] , [4.20]Extra For Excavating Trenches For Pipes, Cables, Etc. In Ordinary/Hard Rock Exceeding 1.5 M In Depth But Not Exceeding 3 M. (Rate Is Over Corresponding Basic Item For Depth Up To 1.5 Metre) [Through Rate] , [4.21]Extra For Excavating Trenches For Pipes, Cables, Etc. In Ordinary/Hard Rock Exceeding 3M In Depth But Not Exceeding 4.5 M. (Rate Is Over Corresponding Basic Item For Depth Up To 1.5 Metre) [Through Rate] , [6.1.3]Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Below Plinth Level And Up To Floor Iv Level: 3. 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) : 4 Graded Stone Aggregate 40 Mm Nominal Size) [Through Rate] , [6.1.7]Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Below Plinth Level And Up To Floor Iv Level: 7. 1:5:10 (1 Cement : 5 Coarse Sand (Zone-Iii): 10 Graded Stone Aggregate 40 Mm Nominal Size) [Through Rate] , [6.14.2]Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 2. 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) : 4 Graded Stone Aggregate 20 Mm Nominal Size) [Through Rate] , [6.30.3]Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 3. Suspended Floors, Roofs, Landings, Balconies And Access Platform [Through Rate] , [6.33.6]Steel Reinforcement For Reinforced Cement Concrete Work, Where Not Included In The Complete Rate Of Rcc, Including Straightening, Cutting, Bending, Placing In Position, Binding, Wastage, Overlaps, Welded Joints, Spacer Bars, Chairs, Stays, Hangers And Annealed Steel Wire Etc. Complete In All Respect Below Plinth Level Note: Reinforcement Shall Be Measured In Length Including Hooks, If Any, Separately For Different Diameters As Actually Used In Work , Excluding Overlaps. Wastage, Overlaps, Couplings, Welded Joints, Spacer Bars, Chairs, Stays, Hangers And Annealed Steel Wire Or Other Methods Of Binding & Placing Shall Not Be Measured And Cost Of These Items Shall Be Deemed To Be Included In The Rates For Reinforcement. 6. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More [Through Rate] , [7.20.1]Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 10.5 In Foundation And Plinth In: 1. Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) [Through Rate]