|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge |
| 2 | All kinds of soil |
| 3 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : |
| 4 | 15 mm to 40 mm nominal bore. |
| 5 | Dismantling G.I. pipes (external work) excluding excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : |
| 6 | 15 mm to 40 mm nominal bore. |
| 7 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 8 | 40 mm dia G.I. pipes |
| 9 | 25 mm dia G.I. pipes |
| 10 | 20 mm dia G.I. pipes |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 12 | 15mm nominal outer dia pipes. |
| 13 | 20mm nominal outer dia pipes. |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 15 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) including all sorts of carriage complete (as per direction of Engineer incharge) |
| 16 | 40mm dia |
| 17 | 25 mm dia |
| 18 | 20 mm dia |
| 19 | 15 mm dia |
| 20 | Providing, supplying, and installation of complete foldable display stall (gazebo type) of size 3.0 m × 3.0 m, made of heavy-duty powder-coated MS/steel frame with telescopic adjustable legs, covered with waterproof and UV-resistant polyester/PVC fabric (minimum 600–700 GSM), including minimum two detachable side walls, anchoring arrangement with ropes and pegs/sandbags, and carrying case; including providing and fixing of custom-printed “Jal Shakti Department” branding on canopy/side walls using weather-resistant flex/vinyl; including supply of one folding table, four plastic chairs, LED/solar lighting arrangement, and heavy-duty plastic floor mat; the complete unit shall be suitable for use as temporary Water Supply Control Station-cum-Laboratory Support Unit for field and lab staff during Yatra/field duties, all complete as per specifications and directions of Engineer-in-Charge. (The entire assembly is to be rteturned to the Stores of RWS Diviison Ganderbal after the culminmation of Yatra) |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 22 | Hiring of tented accomodation to supervisory/field staff with complete bedding arrangements viz; table fan, matresses, warm blankets, pillows with covers, bed sheets, bed covers and furnisihing as per requirement. The tents should have sufficient capacity to accomodate 4 persons with beds. The job includes replacement of bed sheets, bed covers, pillow covers atleast twice a week to maintain cleanliness and hygiene, including lighting arrangements for 60 days |
| 23 | Providing & fixing of 19 mm thick commercial ply for steel beds |
| 24 | Providing refreshment to supervisory staff/field staff deputed for Yatra duy at transit camp Manigam for a period of 60 days |
| 25 | Morning Refreshment- Kashmiri Tea with local bread toast |
| 26 | Evening Refreshment- Lipton Tea with Butter Toast |
| 27 | Lunch Vegeterian |
| 28 | Dinner Non Vegeterian |
| 29 | Supply of Tools & Plant/accessories of standard quality for upkeep and maintenace of the pipe network of the water supply schemes and within the premsies of the transit camp for the full Yatra period |
| 30 | 600 mm Stilson Type Coforming to IS 4003 PART I (pipe wrench) |
| 31 | 450 mm Stilson Type Coforming to IS 4003 PART I (pipe wrench) |
| 32 | 350 mm Stilson Type Coforming to IS 4003 PART I (pipe wrench) |
| 33 | Hammer with hand with weight 1kg |
| 34 | Heavy Duty Iron Rod (Sabbal for Digging) |
| 35 | Shovel Round with Steel Handle |
| 36 | Pick Axe with Handle |
| 37 | Garden Hoe with Handle |
| 38 | Ratchet Die Set (Size 1/2, 3/4, 1 inch ) |
| 39 | Rain Coats with Trousers of Standarad quality |
| 40 | Cap of standard quality with Jal Shakti (PHE ) Deptt imprinted |
| 41 | Safety shoes of approved standard quaility |
| 42 | Loading, Unloading and Carriage of dismantled pipes from source of purchase/stores to site of work & back to Divisional Stores by an average lead of 12 km (total weight x 2 ) |
| 43 | Carriage of available MS Beds/PVC Tanks from Stores to Site of Work and Back to Stores after conclusion of Yatra |
| 44 | Providing and fixing pipe specials including cutting and threading the pipe and making long screws etc. complete (as per non avaliliblity in divisional store) |
| 45 | 50mmx25 mm dia G.I reducing socket |
| 46 | 40mmx25 mm dia G.I reducing socket |
| 47 | 40mmx25 mm dia G.I Elbow reducer |
| 48 | 40mmx25 mm dia G.I Tee |
| 49 | 40mmx20 mm dia G.I Tee |
| 50 | 20mmx20 mm dia G.I Tee |
| 51 | 40 mm dia G.I elbows |
| 52 | 25mm G.I Elbow |
| 53 | 20mm G.I Elbow |
| 54 | 15mm G.I Elbow |
| 55 | 25 mmx20mm G.I. elbow reducer |
| 56 | 20 mmx15 mm G.I. elbow reducer |
| 57 | 25 mmx20 mm G.I. elbow reducer |
| 58 | 20 mmx15 mm G.I. elbow reducer |
| 59 | 15 mm G.I. socket |
| 60 | 20mm dia E/Reducer |
| 61 | 25x20 mm reducing socket |
| 62 | 25 mmx25 mm G.I. Equal Tee |
| 63 | 25 mmx20 mm G.I. Tee |
| 64 | 20 mmx20 mm G.I. Tee |
| 65 | 15 mmx15 mm G.I. Tee |
| 66 | 15 mm nominal bore G.I Unions |
| 67 | 20 mm nominal bore G.I Unions |
| 68 | 25 mm nominal bore G.I Unions |
| 69 | 40 mm nominal bore G.I Unions |
| 70 | 15 mm G.I Nipple of length 3'', 4'' and 6'' |
| 71 | 20 mm G.I Nipple of length 3'', 4'' and 6'' |
| 72 | 25 mm G.I Nipple of length 3'', 4'' and 6'' |
| 73 | 40 mm G.I Nipple of length 3'', 4'' and 6'' |
| 74 | 50 mm G.I Nipple of length 3'', 4'' and 7'' |
| 75 | 15 mm dia steel Bibcock |
| 76 | 15 mm dia Ball cock |
| 77 | 15mm dia steel Ball valve |
| 78 | 20 mm dia steel Ball valve |
| 79 | 25 mm dia steel Ball valve Please Enable Macros to View BoQ information |