|
| 1 | SITC of 500mm long rigid architectural RGBW (W-4000K)/TuneableWH LED Linear light operating at 24V DC & housing made of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted 95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shall have 25X40\\" beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 & shall have SDCM<4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire chall have system wattage 18W Fixture must have operating temperature range of -10°C to 50°C. Frequency 50/60Hz. The luminaire shall have declared life of min 50,000 burning hours at L70850 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital Gimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessorios such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, see rity, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.(Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 2 | SITC of 300mm loag rigid architectural RGBW (W-4000K)/TuneableWH LED Linear light with integral driver & housing of Extruded aluminium allcy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating fmish. The luminaire width shall be 45mm & heigh of 55mm without brackets. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the lumisaire cau be tilted +95°. The luminaire shall have silicon glue between optical cover & LED chamber to cusure proper IP66 protection. The luminaire shall be equipped with discrete high-power Crée, Nichia, Osram, Lumiled. The fixture shall have 25°X40°/15°X20°/15°X15° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI >80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 300mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 20W Fixture must have operating temperature range -40°C to 50°C. The fixtus shall have an integral driver with input voltage f 220-240 VAC, 50/60Hz. The luminumire shall have declared life of 50,000 burning hours at L70B50@35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The lutainaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7 million colours or Dynamic tuneable CCTs (3000k 6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate sha l be uplos led slong with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling. Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc. (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 3 | SITC of 1000mm long rigid architectural RGBW (W-4000K) Timeable WH LED Linear light operating at 24V DC & housing made of Extruded aluminium alley 6063 grade & die-cast aluminium end cape. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted 195. The luminaire shall have silicon glue between optical cover & LED chamber to ensore proper IP66 protection. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shall have 25°X40\\" beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 & shall have SDCM<4. The fixture shall come with power & DMX cable of minimum 100mmlength. The fixtures shall be installed with have IP67 connectors. The lursinsire shall have system wattage 36W. Fixture must have operating temperature range of -10°C to 50°C. Frequency 50/60its. The huminaire shall have declared life of min 50,000 burning hours at L70B50 g 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device.The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic himeable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital linuming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, huminaire BIS certificate shall be uploaded along with technical bid. Complete in al: respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unduading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programining of faulty luminaires etc (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 4 | SITC of architectural RGBW (W-4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy - ADC12. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to 100. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have licos gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shali have 3°-3.5°/10°/15°/30°/45°/60° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 for white light & shall have SDCMC4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 10W. Fixture must have operating temperature range of -40°C to 50°C. The fixture shall have an integral driver wits input voltage for 220-240 VAC, 50/60Hz. The lurninaire shall have declared life of 50,000 burning hours at L70B50 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Offs. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k 6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dinuming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding. Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 5 | SITC of Circular shape architectural RGBW (W-4000K) LED flood light with integral driver & housing made of Die cast aluminium alloy - ADC12. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to +90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The lumin are raust have a breather gland. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumile 1. The fixture shall have 3-3.5°/10°/15°/30°/45°/60° beam angle & the leus shall be made of anti-aging & anti JV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have mininum CRI 280 for white light & shall have SDCM24. The fixture shall come with power & DMX cable of minimum 100mar length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 30W. Fixture raust have operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The huminaire shall have declared life of 50,000 burning hours at L70B50 @ 35deg. The lunainaire shall have MR class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on laminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Londing/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty laminaires etc. (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 6 | SITC of Circular shape architectural RGBW (W-4000K) LED flood light with integral driver & housing made of Die cast ahaminium alloy ADC12. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bescket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to 490\\". The hencket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire mast have a breather gland. The luminaire shall be equipped with discrete high-power Cree, Nichia, Osram, Lumiled. The fixture shall have 3. 3.5°/10°/15°/30°/45°/60° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The opticalcover shall be made of IK06 rated clear tempered glass. The LEDs shall have minitum CRI >80 for white light & shallhave SDCM24. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 80W. Fixture must have operating.temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70B50 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall sutomatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tumeable CCTs (3000k -6500k). Bidder to ensure Luminaire, Lriver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programvning of faulty luminaires etc (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 7 | SITC of 1000mm long rigid architectural RGBW (W-4000K)/Tuneable WH LED Lear light with integral driver & housing of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted #95\\". The luminaire shali have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The luminaire shall be equipped with discrete high-power Cree, Nichis, Osram, Lumiled. The fixture shall have 25*X40°/15°X20°/15°X15° beam angle & the lens shall be made of anti-aging & anti UV-PMMA materiasl. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have maininsum CRI 280 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 300mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shail have system wattage 120W. Fixture must have operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70950MR @35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The Laminaire shall be capable of R-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7millior colours or Dynamic tuneable CCTs (3000k-6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same maze to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, lutninaire EIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handling, Loading/unloading, security, upkeep and operation & maintenance for 5 yearsincluding replacement, recification, programming o. faulty lumaineries etc (Make: Bajaj/Havells/K-Lite or equivalent as approved by engineer-in-charge) |
| 8 | SITC of DMX512 controller suitable for controlling upto 200Nos RGBW fittings The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect inchading accessories such as Leader Jumper cable. connectors, hardware, Packing, forwarding, Handiling. Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.(per gate) |
| 9 | Planning. Designing, Programming of all the light fixtures with integratior into controller and making multiple programming in total of 5 different occasion. Synchronizing all fixtures into one (per gate) |
| 10 | SITC and fixing of RDM-6 Wall DMX Splitter & Booster is a 6-output DMX/RDM splitter with DMX/RDM, pass-through supporting bi-directional communications nput power DC 12-24V input, 100-240V, 24VDC plug-in power adaptor included power consumption 4.5W max, housing made of polycarbonate, surface mount or DIN-rail mountable, operation temperature 100- +35C, output six 3-pin terminal socket, connection two piece compression screw terminal, protection Rating IP20, Interior application. Certification CE, BIS. |
| 11 | Supply installation commissioning of following sizes of power and data cable as mationed 3 x 2.5 sqmm Cu unarmored multistrand |
| 12 | 5 x 6 sqmm Cu unarmored multistrand |
| 13 | 4 к. 16sqmm: Al armoured |
| 14 | Data cable Cat 6 |
| 15 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground MR cable including rubber ring etc. complete in all respect. The armouring of the cable shall be property connected with the earth.16 sqmm |
| 16 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc 16 sqmm |
| 17 | Providing and fixing 25 mm X 5 min G.1. strip in 40 nun dia G.I. pipe from earth electrode including connection with G.1. nut, bolt, spring, washer excavation and re-filling etc, as required. |
| 18 | Supply and burting of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer Gl pipe of 16 swg and inner Gl pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity |
| 19 | S&F of 40 Amp. 4 Pole. Isolator |
| 20 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connectious, testing and commissioning ete, av required. Double pole |
| 21 | Cable Entry Junction Boxes IP66 HENSEL vat Ref DK0606 |
| 22 | Cable Entry Junction Boxes IP66 HENSEL cat Ref KF3535 B |
| 23 | Synthetic Glands with Lock Nut Cat ref: 1545.25.178220.40 |
| 24 | Supply, installation, testing and commissioning of cages for protection of light fixtures of suitable size made of stainless MR steel 304 grade having wire mesh with spacing of 1.5-2 inches and sturdy to aveld ohysical damage with base frame being made of 4 mm thick strip |
| 25 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including Item No. cutting the wall and making good the same in case of recessed conduit as required 20 mm |
| 26 | 40 mm |
| 27 | Supply, installatica, testing and commissioning of Electrical panel with Servo Bypass swith on incomer having 100 A MR MCCB with Surge Protection Device for all phases with minimum & No cutgoing of 16 A 4P MCCB A compartment having two switches for safekeeping the controller and other necessary equipments Load capacity |
| 28 | Supply, installation, resting and commissioning of Oil Cooled Servo Stabilizer of 12 KW Three Phase with Enclosure and MR connection to the main panel, with rating of 180-250 V stabilizong and maintaining a fixed voltage output of 220Valt for the entire systers Please Enable Macros to View BoQ information |
