Providing HDF wooden Flooring 8 mm thick AC 4 of minimum size 1220 mm into 200 mm density 900 kg per cum with variation plus minus 3 percent in textured wood grain finishes designed for floating click lock installation scratch and stain resistance for high residential use
2
Foam sheet
Providing closed cell Expanded poly ethelene Foam Sheet 4 mm thick of density 40 kg per cum in rolls of 1200 mm wide
3
sealant
Providing Silicon based Joint Sealant Neutral Cure Silicone for HDF High Density Fibreboard flooring
4
adhesive
Rubber base Adhesive
5
Hollock wood
Providing Kiln seasoned and chemically treated hollock wood batten 50 mm into 50 mm 3000 mm long for wall insulation framing
6
rock wool
Providing thermal insulation with Resin Bonded rock wool conforming to IS 8183 having density 48 kg per cum 50 mm thick
7
particle board
Providing and fixing in wall lining flat pressed three layer medium density particle board or graded wood Pre laminated one side decorative lamination and other side balancing lamination Grade I Type II IS 12823 marked 18 mm thick in 4 feet into 8 feet size
8
nails4
Mild Steel Nails 4 inches
9
nails3
Mild Steel Nails 3 inches
10
nails2
Mild Steel Nails 2 point 5 inches
11
nails2
Mild Steel Nails 2 inches
12
nails1
Mild Steel Nails 1 point 5 inches
13
nails17
Nails 17 No
14
GI wire
GI wire 20 SWG
15
Polythene bag
Providing 200 G Virgin LDPE Polythene bags of 1200 mm into 1200 mm size transparent High tensile strength tear resistant for heavy duty use
16
planks
Providing Kiln seasoned and chemically treated hollock wood 35 mm thick finished planks in 1200 mm into 75 mm size for windows shutter
17
Hollock wood
Providing Kiln seasoned and chemically treated hollock wood batten 40 mm into 50 mm 3000 mm long
18
glass
Float glass sheet of nominal thickness 4 mm weight not less than 10 kg per sqm of size 1200 mm into 1200 mm
19
hinges
Stainless steel butt hinges 75 mm into 47 mm into 1 point 8 mm IS 12817 marked
20
Handle
Providing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade 100 mm
21
Tower bolt
Providing aluminium Tower bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade 100 mm into 10 mm
22
Beading
2nd class teak wood moulded corner beading of size 25 mm into 25 mm
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
