|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (UPPWD SOR 653) |
| 3 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminum housing built with driver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. SOR no. 1455 Cat AAA |
| 4 | Supply of LED type single dome avation obstruction lights. |
| 5 | Supply of Fixing 18 Meter LED Rope Light| Indian Tricolor Strip Light -Orange + White + Green Colour in Single Strip Independence Day 18 Meter Plug and Play Waterproof Strip Light. |
| 6 | Supply and fixing 40A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SOR 807 |
| 7 | Supply and laying of 25 Sq. mm x 3.5 core aluminum conductor PVC insulated armored served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on Sides and on top. On surface the cable sun shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-In charge, complete in all respect SOR no. -501 J |
| 8 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR 504 |
| 9 | S/F of Flexible pipe 63 mm dia with the cable into the trenches etc complete in all respect. |
| 10 | S/F 3 Core 2.5 sq mm PVC Insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volte. Conforming to HSN Code 8544 |
| 11 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. |
| 12 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. SOR no.-716 |
| 13 | Numbering of pole by letter writing with cost of Radium, Sticker, T&P (12\\" x 48\\") |
| 14 | Testing & commissioning with power connection, labor & TNP etc at site. Please Enable Macros to View BoQ information |
