Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 2 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 Stainless Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size 585x480mm with flush pipe and integrated type foot rests |
| 3 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 4 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid |
| 5 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 6 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked black solid plastic seat and lid. |
| 7 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 8 | 18.4.1 One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 9 | 18.4.2 Range of two urinal basins with 5 literwhite P.V.C automatic flushing cistern. |
| 10 | 18.4.3 Range of three urinal basins with 10 liter white P.V.C automatic flushing cistern. |
| 11 | 18.4.4 Range of four urinal basins with 10 liter white P.V.C automatic flushing cistern.. |
| 12 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 liter P.V.C automatic flushing cistern. |
| 13 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. Range of two half stall urinals with 5 literP.V.C automatic flushing cistern.. |
| 14 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. Range of three half stall urinals with 10 liter P.V.C automatic flushing cistern. |
| 15 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required.Range of four half stall urinals with 10 liter P.V.C automatic flushing cistern. |
| 16 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: Single squatting plate with 5 liter P.V.C. automatic flushing cistern. |
| 17 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:Range of two squatting plates with 5 liter P.V.C. automatic flushing cistern. |
| 18 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:Range of three squatting plates with 10 liter P.V.C. automatic flushing cistern. |
| 19 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:Range of four squatting plates with 10 liter P.V.C. automatic flushing cistern. |
| 20 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 21 | 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 22 | 18.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 23 | 18.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 24 | 18.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 25 | 18.7.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. |
| 26 | 18.7.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap |
| 27 | 18.7.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 28 | 18.7.8 White Vitreous China Surgeon type wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers. |
| 29 | 18.7.9 White Vitreous China Surgeon type wash basin size 660x460 mm with single 15 mm C.P. brass pillar taps with elbows operated lever ISI marked |
| 30 | 18.7.10 Stainless steel AISI-304 (18/8) Round basin 405x355 mm with single 15mm C.P. brass pillar trap |
| 31 | 18.7.11 Stainless steel AISI-304 (18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap |
| 32 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 33 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. including painting of fittings and brackets, cutting and making goodthe walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 34 | Add for:18.8.1 Providing 32 mm dia. C.P. brass trap. |
| 35 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 36 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm |
| 37 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board |
| 38 | 18.11.1.1 510x1040mm bowl depth 250mm |
| 39 | 18.11.1.2 510x1040mm bowl depth 225mm |
| 40 | 18.11.1.3 510x1040mm bowl depth 200mm |
| 41 | 18.11.1.4 510x1040mm bowl depth 178mm |
| 42 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board |
| 43 | 18.11.2.1 610x510mm bowl depth 200mm |
| 44 | 18.11.2.2 610x460mm bowl depth 200mm |
| 45 | 18.11.2.2 470x420mm bowl depth 178mm |
| 46 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :18.12.1 Size 450x300x150 mm |
| 47 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :18.12.2 Size 600x450x200 mm |
| 48 | Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required.White glazed fire clay draining board of size 600x450x25mm |
| 49 | Providing and fixing white vitreous china water closet squatting pan (Indian type)- Long pattern W.C. pan of size 580 mm |
| 50 | Providing and fixing white vitreous china water closet squatting pan (Indian type)- Orissa pattern W.C. pan of size 580x440 mm |
| 51 | Extra for using coloured W.C. pan instead of white W.C. pan18.15.1 Orissa pattern W.C. pan 580x440 mm |
| 52 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. |
| 53 | Extra for using coloured pedestal type W.C Pan (European type) with low level cistern of same colour instead of white vitreous china W.C. pan and cistern. |
| 54 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 55 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:18.18.1 250x125x25 mm |
| 56 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:-10 liter capacity -White |
| 57 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:- 10 liter capacity – coloured |
| 58 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete:-10 liter (full flush) capacity-white |
| 59 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete:-10 liter (full flush) capacity-coloured. |
| 60 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid. |
| 61 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:-Black solid plastic seat with lid. |
| 62 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:- Coloured (other than black and white) solid plastic seat with lid. |
| 63 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 64 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 65 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 66 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 67 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 68 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. |
| 69 | 18.25.1 Flat back wash basin of size 630x450 mm. |
| 70 | 18.25.2 Flat back wash basin of size 550x400 mm. |
| 71 | 18.25.3 Angle back wash basin of size 600x480 mm. |
| 72 | 18.25.4 Angle back wash basin of size 400x400 mm. |
| 73 | 18.25.5 Flat back wash basin of size 450x300 mm. |
| 74 | 18.25.6 Surgeon type wash basin of size 660x460 mm. |
| 75 | Providing and fixing kitchen sink including making all connections excluding cost of fittings :-White glazed fire clay sink of size 600x450x250 mm. |
| 76 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 450x300x150mm. |
| 77 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 600x450x200 mm. |
| 78 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:-Semi rigid pipe 32 mm dia |
| 79 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 40 mm dia |
| 80 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:- Flexible pipe 32 mm dia |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:- Flexible pipe 40 mm dia |
| 82 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 83 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. |
| 84 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 85 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia. |
| 86 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 87 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350mm (outer dimensions) |
| 88 | 1Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 89 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete. |
| 90 | Providing and fixing toilet paper holder C.P. brass |
| 91 | Providing and fixing toilet paper holder Vitreous china |
| 92 | Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S and S pipe as per IS:1729 |
| 93 | Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron S and S pipe as per IS:3989 |
| 94 | Providing and fixing soil, waste and vent pipes : 100 mm dia. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 95 | Providing and fixing soil, waste and vent pipes :75 mm diameter. Sand cast iron S and S pipe as per IS:1729 |
| 96 | Providing and fixing soil, waste and vent pipes :75 mm diameter. Centrifugally cast (spun) iron S and S pipe as per IS:3989 |
| 97 | Providing and fixing soil, waste and vent pipes :-75 mm diameter Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 98 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes-75 mm dia. pipe |
| 99 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes -100 mm dia. Pipe. |
| 100 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/Cast Iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), including cost of cutting holes and making good the walls etc:-For 100 mm dia. pipe |
| 101 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/Cast Iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), including cost of cutting holes and making good the walls etc: -18.37.2 For 75 mm dia. pipe |
| 102 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:- 100 mm dia. Sand cast iron S and S as per IS:1729 |
| 103 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:- 100 mm dia Sand cast iron S and S as per IS:3989 |
| 104 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:- 100 mm dia.- Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 105 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:- 75 mm dia. Sand cast iron S and S as per IS:1729 |
| 106 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:- 75 mm dia. Sand cast iron S and S as per IS:3989 |
| 107 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:- 75 mm dia. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 108 | Providing and fixing plain bend of required degree:100 mm dia. |
| 109 | Sand cast iron S and S as per IS:1729 |
| 110 | Sand cast iron S and S as per IS:3989 |
| 111 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 112 | Providing and fixing plain bend of required degree:75 mm dia. |
| 113 | Sand cast iron S and S as per IS:1729 |
| 114 | Sand cast iron S and S as per IS:3989 |
| 115 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 116 | Providing and fixing heel rest sanitary bend: 100 mm dia. |
| 117 | Sand cast iron S and S as per IS:1729 |
| 118 | Sand cast iron S and S as per IS:3989 |
| 119 | Providing and fixing heel rest sanitary bend: 75 mm dia. |
| 120 | Sand cast iron S and S as per IS:1729 |
| 121 | Sand cast iron S and S as per IS:3989 |
| 122 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100x100 mm. |
| 123 | Sand cast iron S and S as per IS:1729 |
| 124 | Sand cast iron S and S as per IS:3989 |
| 125 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75x75x75x75 mm. |
| 126 | Sand cast iron S and S as per IS:1729 |
| 127 | Sand cast iron S and S as per IS:3989 |
| 128 | Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm. |
| 129 | Sand cast iron S and S as per IS:1729 |
| 130 | Sand cast iron S and S as per IS:3989 |
| 131 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 inside & outside IS:15905 |
| 132 | Providing and fixing double equal plain junction of required degree. 75x75x75x75 mm. |
| 133 | Sand cast iron S and S as per IS:1729 |
| 134 | Sand cast iron S and S as per IS:3989 |
| 135 | Hubless centrifugally cast (spun) iron pipes epoxy coated |
| 136 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm. |
| 137 | Sand cast iron S and S as per IS:1729 |
| 138 | Sand cast iron S and S as per IS:3989 |
| 139 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75x75x75 mm. |
| 140 | Sand cast iron S and S as per IS:1729 |
| 141 | Sand cast iron S and S as per IS:3989 |
| 142 | Providing and fixing single equal plain junction of required degree. 100x100x100 mm. |
| 143 | Sand cast iron S and S as per IS:1729 |
| 144 | Sand cast iron S and S as per IS:3989 |
| 145 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 146 | Providing and fixing single equal plain junction of required degree 75x75x75 mm. |
| 147 | Sand cast iron S and S as per IS:1729 |
| 148 | Sand cast iron S and S as per IS:3989 |
| 149 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
| 150 | Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x75x75 mm. |
| 151 | Sand cast iron S and S as per IS:1729 |
| 152 | Sand cast iron S and S as per IS:3989 |
| 153 | Providing and fixing double unequal plain junction of required : 100x100x75x75 mm. |
| 154 | Sand cast iron S and S as per IS:1729 |
| 155 | Sand cast iron S and S as per IS:3989 |
| 156 | Hubless centrifugally cast (spun) iron epoxy coated inside& outside as per IS:15905 |
| 157 | Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 100x100x75 mm. |
| 158 | Sand cast iron S and S as per IS:1729 |
| 159 | Sand cast iron S and S as per IS:3989 |
| 160 | Providing and fixing single unequal plain junction of required degree :100x100x75 mm. |
| 161 | Sand cast iron S and S as per IS:1729 |
| 162 | Sand cast iron S and S as per IS:3989 |
| 163 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 164 | Providing and fixing double equal plain invert branch of required degree : 100x100x100x100 mm. |
| 165 | Sand cast iron S and S as per IS:1729 |
| 166 | Sand cast iron S and S as per IS:3989 |
| 167 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 168 | Providing and fixing double equal plain invert branch of required degree : 75x75x75x75 mm. |
| 169 | Sand cast iron S and S as per IS:1729 |
| 170 | Sand cast iron S and S as per IS:3989 |
| 171 | Providing and fixing single equal plain invert branch of required degree : 100x100x100 mm. |
| 172 | Sand cast iron S and S as per IS:1729 |
| 173 | Sand cast iron S and S as per IS:3989 |
| 174 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 175 | Providing and fixing single equal plain invert branch of required degree : 75x75x75 mm. |
| 176 | Sand cast iron S and S as per IS:1729 |
| 177 | Sand cast iron S and S as per IS:3989 |
| 178 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 179 | Providing and fixing double unequal invert branch of required degree 100x100x75x75 mm. |
| 180 | Sand cast iron S and S as per IS:1729 |
| 181 | Sand cast iron S and S as per IS:3989 |
| 182 | Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm. |
| 183 | Sand cast iron S and S as per IS:1729 |
| 184 | Sand cast iron S and S as per IS:3989 |
| 185 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 186 | Providing and fixing sand cast iron S and S off sets as per IS:1729:76 mm off sets. |
| 187 | With 75 mm dia. pipe |
| 188 | With 100 mm dia. pipe |
| 189 | Providing and fixing sand cast iron S and S off sets as per IS:1729: 114 mm off sets. |
| 190 | With 75 mm dia. pipe |
| 191 | With 100 mm dia. pipe |
| 192 | Providing and fixing sand cast iron S and S off sets as per IS:1729: 152 mm off sets. |
| 193 | With 75 mm dia. pipe |
| 194 | With 100 mm dia. pipe |
| 195 | Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 65 mm offsets |
| 196 | With 100 mm dia pipe |
| 197 | With 75 mm dia pipe |
| 198 | Providing and fixing sand cast (spun) iron S and S off sets as per IS:3989:--75 mm off sets.---( With 75 mm dia. Pipe ) |
| 199 | Providing and fixing sand cast (spun) iron S and S off sets as per IS:3989:--150 mm off sets. |
| 200 | With 75 mm dia. Pipe |
| 201 | With 100 mm dia. Pipe |
| 202 | Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905-- 130 mm offsets |
| 203 | With 100 mm dia |
| 204 | With 75 mm dia |
| 205 | Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm. |
| 206 | Sand cast iron S and S as per IS:1729 |
| 207 | Sand cast iron S and S as per IS:3989 |
| 208 | Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 75 mm. |
| 209 | Sand cast iron S and S as per IS:1729 |
| 210 | Sand cast iron S and S as per IS:3989 |
| 211 | Providing and fixing terminal guard : 100 mm. |
| 212 | Sand cast iron S and S as per IS:1729 |
| 213 | Sand cast iron S and S as per IS:3989 |
| 214 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 215 | Providing and fixing terminal guard : 75 mm. Sand cast iron S and S as per IS:1729 |
| 216 | Providing and fixing terminal guard : 75 mm. Sand cast iron S and S as per IS:3989 |
| 217 | Providing and fixing collar : 100 mm. Sand cast iron S and S as per IS:1729 |
| 218 | Providing and fixing collar : 100 mm. Sand cast iron S and S as per IS:3989 |
| 219 | Providing and fixing collar : 75 mm. Sand cast iron S and S as per IS:1729 |
| 220 | Providing and fixing collar : 75 mm. Sand cast iron S and S as per IS:3989 |
| 221 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe-- 100 mm dia ( SS 304 grade coupling with EPDM rubber gasket ) |
| 222 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe--75 mm dia ( SS 304 grade coupling with EPDM rubber gasket) |
| 223 | Providing lead caulked joints to sand cast iron / centrifugally cast (spun) iron pipes and fittings of diameter: |
| 224 | 100 mm. |
| 225 | 75 mm. |
| 226 | 50 mm. |
| 227 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : |
| 228 | 100 mm. |
| 229 | 75 mm. |
| 230 | 50 mm. |
| 231 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : --100 mm inlet and 100 mm outlet |
| 232 | Sand cast iron S and S as per IS:3989 |
| 233 | Sand cast iron S and S as per IS:1729 |
| 234 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 235 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : --100 mm inlet and 75 mm outlet |
| 236 | Sand cast iron S and S as per IS:3989 |
| 237 | Sand cast iron S and S as per IS:1729 |
| 238 | Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 239 | Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement :4 coarse sand): |
| 240 | 100 mm dia. |
| 241 | 75 mm dia. |
| 242 | 50 mm dia. |
| 243 | Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings etc. complete for new work. |
| 244 | Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. |
| 245 | Re-painting C.I. cistern with synthetic enamel paint of approved colour, brand and manufacture on the outside surface of cistern, flush pipe, other fittings etc. complete. |
| 246 | Painting sand cast iron/centrifugally cast (spun) iron soil waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : |
| 247 | 100 mm diameter pipe. |
| 248 | 75 mm diameter pipe. |
| 249 | Repainting sand cast iron/centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc: |
| 250 | 100 mm diameter pipe. |
| 251 | 75 mm diameter pipe. |
| 252 | Repainting bath tub of size 1700x730x430mm with enamel paint. |
| 253 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:--White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend |
| 254 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: |
| 255 | Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 256 | Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 257 | Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. |
| 258 | Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. |
| 259 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 260 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 261 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 262 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 263 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 264 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms |
| 265 | Providing and fixing PTMT urinal cock of approved quality and colour : 15 mm nominal bore, 80 mm long, 42mm high and 30 mm wide with BSP female threads weighing not less than 48 gms |
| 266 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4 Nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.6mm galvanized M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6mm, one bolt on each side of the pipe.- Total bracket length 580mm of approved shape and design (for single 100mm dia pipe) |
| 267 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4 Nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.6mm galvanized M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6mm, one bolt on each side of the pipe. -- Total bracket length 810mm of approved shape and design (for two 100mm dia pipes) |
| 268 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4 Nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.6mm galvanized M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6mm, one bolt on each side of the pipe.---Total bracket length 1040mm of approved shape and design (for three 100 mm dia pipes) |
| 269 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 270 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. |
| 271 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 272 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 273 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 274 | (16mm OD) pipe |
| 275 | (20mm OD) pipe |
| 276 | (25mm OD) pipe |
| 277 | (32mm OD) pipe |
| 278 | (40mm OD) pipe |
| 279 | (50mm OD) pipe |
| 280 | PE-AL-PE COMPOSITE PRESSURE PIPES AND FITTINGSProviding and fixing Polyethylene- Aluminum- Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. |
| 281 | (16mm OD) pipe |
| 282 | (20mm OD) pipe |
| 283 | (25mm OD) pipe |
| 284 | (32mm OD) pipe |
| 285 | PE-AL-PE COMPOSITE PRESSURE PIPES AND FITTINGSProviding and fixing Polyethylene- Aluminum- Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: External work including trenching and refilling etc.complete. |
| 286 | (16mm OD) pipe |
| 287 | (20mm OD) pipe |
| 288 | (25mm OD) pipe |
| 289 | (32mm OD) pipe |
| 290 | (40mm OD) pipe |
| 291 | (50mm OD) pipe |
| 292 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 293 | Internal work-exposed on wall with clamps at 1.00 meter spacing. |
| 294 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 295 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 296 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 297 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 298 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 299 | PN-10 pipe , 50mm OD(SDR-11) |
| 300 | PN-20 pipe , 32mm OD(SDR-11) |
| 301 | PN-20 pipe , 25mm OD(SDR-11) |
| 302 | PN-20 pipe , 20mm OD(SDR-11) |
| 303 | PN-20 Pipe , 50mm OD (SDR(11) |
| 304 | 19.2.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 305 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 306 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 307 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 308 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 309 | PN-20 pipe , 32mm OD(SDR-7.4) |
| 310 | PN-20 pipe , 25mm OD(SDR-7.4) |
| 311 | PN-20 pipe , 50mm OD(SDR-7.4) |
| 312 | External work including trenching, refilling etc. |
| 313 | PN-16 pipe, 16mm OD (SDR-7.4) |
| 314 | PN-16 pipe , 20mm OD (SDR-7.4) |
| 315 | PN-16 pipe , 25mm OD (SDR-7.4) |
| 316 | PN-16 pipe , 32mm OD (SDR-7.4) |
| 317 | PN-16 pipe, 40mm OD (SDR-7.4) |
| 318 | PN-10 pipe , 50mm OD (SDR-11) |
| 319 | PN-10 pipe , 63mm OD (SDR-11) |
| 320 | PN-10 pipe , 75mm OD (SDR-11) |
| 321 | PN-10 pipe , 90mm OD (SDR-11) |
| 322 | PN-10 pipe , 110mm OD (SDR-11) |
| 323 | PN-10 pipe , 160mm OD (SDR-11) |
| 324 | Providing and fixing PPR Unions |
| 325 | PPR Union 20mm |
| 326 | PPR Union 25mm |
| 327 | PPR Union 32mm |
| 328 | PPR Union 40mm |
| 329 | PPR Union 50mm |
| 330 | PPR Union 63mm |
| 331 | PPR Union 75mm |
| 332 | CPVC PIPES AND FITTINGS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
| 333 | Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 334 | 19.3.1.1 15mm nominal outer dia pipes. |
| 335 | 19.3.1.2 20mm nominal outer dia pipes. |
| 336 | 19.3.1.3 25mm nominal outer dia pipes. |
| 337 | 19.3.1.4 32mm nominal outer dia pipes. |
| 338 | 19.3.1.5 40mm nominal outer dia pipes. |
| 339 | 19.3.1.6 50mm nominal outer dia pipes. |
| 340 | 19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 341 | 19.3.2.1 15mm nominal outer dia pipes. |
| 342 | 19.3.2.2 20mm nominal outer dia pipes. |
| 343 | 19.3.2.3 25mm nominal outer dia pipes. |
| 344 | 19.3.2.4 32mm nominal outer dia pipes. |
| 345 | 19.3.3 External work including trenching, refilling etc. |
| 346 | 19.3.3.1 15mm nominal outer dia pipes. |
| 347 | 19.3.3.2 20mm nominal outer dia pipes. |
| 348 | 19.3.3.3 25mm nominal outer dia pipes. |
| 349 | 19.3.3.4 32mm nominal outer dia pipes. |
| 350 | 19.3.3.5 40mm nominal outer dia pipes. |
| 351 | 19.3.3.6 50mm nominal outer dia pipes. |
| 352 | 19.3.3.7 62.50mm nominal outer dia pipes. |
| 353 | 19.3.3.8 75mm nominal outer dia pipes. |
| 354 | 19.3.3.9 100mm nominal outer dia pipes. |
| 355 | 19.3.3.10 150mm nominal outer dia pipes. |
| 356 | G.I. PIPES AND FITTINGSProviding and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Light A Type- Internal work-Exposed on wall- |
| 357 | 19.4.1.2 15mm dia. nominal bore |
| 358 | 19.4.1.2 20 mm dia. nominal bore |
| 359 | 19.4.1.3 25 mm dia. nominal bore |
| 360 | 19.4.1.4 32 mm dia. nominal bore |
| 361 | 19.4.1.5 40 mm dia. nominal bore |
| 362 | 19.4.1.6 50 mm dia. nominal bore |
| 363 | G.I. PIPES AND FITTINGSProviding and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Medium B Type- Internal work-Exposed on wall- |
| 364 | 19.4.1.2 15mm dia. nominal bore |
| 365 | 19.4.1.2 20 mm dia. nominal bore |
| 366 | 19.4.1.3 25 mm dia. nominal bore |
| 367 | 19.4.1.4 32 mm dia. nominal bore |
| 368 | 19.4.1.5 40 mm dia. nominal bore |
| 369 | 19.4.1.6 50 mm dia. nominal bore |
| 370 | G.I. PIPES AND FITTINGSProviding and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: |
| 371 | 19.4.2.1 15 mm dia. nominal bore |
| 372 | 19.4.2.2 20 mm dia. nominal bore |
| 373 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 374 | 19.5.1 15 mm and 20 mm dia. G.I. pipes |
| 375 | 19.5.2 25 mm and 32 mm dia. G.I. pipes |
| 376 | 19.5.3 40 mm and 50 mm dia. G.I. pipes |
| 377 | 19.5.4 65 mm and 80 mm dia. G.I. pipes |
| 378 | 19.5.5 100 mm and 150 mm dia. G.I. pipes |
| 379 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)--Light |
| 380 | 19.6.1 15 mm dia. nominal bore |
| 381 | 19.6.2 20 mm dia. nominal bore |
| 382 | 19.6.3 25 mm dia. nominal bore |
| 383 | 19.6.4 32 mm dia. nominal bore |
| 384 | 19.6.5 40 mm dia. nominal bore |
| 385 | 19.6.6 50 mm dia. nominal bore |
| 386 | 19.6.7 65 mm dia. nominal bore |
| 387 | 19.6.8 80 mm dia. nominal bore |
| 388 | 19.6.9 100 mm dia. nominal bore |
| 389 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)-- Medium |
| 390 | 19.6.1 15 mm dia. nominal bore |
| 391 | 19.6.2 20 mm dia. nominal bore |
| 392 | 19.6.3 25 mm dia. nominal bore |
| 393 | 19.6.4 32 mm dia. nominal bore |
| 394 | 19.6.5 40 mm dia. nominal bore |
| 395 | 19.6.6 50 mm dia. nominal bore |
| 396 | 19.6.7 65 mm dia. nominal bore |
| 397 | 19.6.8 80 mm dia. nominal bore |
| 398 | 19.6.9 100 mm dia. nominal bore |
| 399 | 19.6.10 150 mm dia. nominal bore |
| 400 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete19.7.1 25 to 40 mm nominal bore |
| 401 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete19.7.2 50 to 80 mm nominal bore |
| 402 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete. (cost of water meter and stop cock to be paid separately) |
| 403 | Providing and fixing brass bib cock of approved quality.19.9.1 15 mm nominal bore |
| 404 | Providing and fixing brass bib cock of approved quality.19.9.2 20 mm nominal bore |
| 405 | Providing and fixing brass stop cock of approved quality.19.10.1 15 mm nominal bore |
| 406 | Providing and fixing brass stop cock of approved quality.19.8.10 20 mm nominal bore |
| 407 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 408 | 19.11.1 25 mm nominal bore |
| 409 | 19.11.1 A 20 mm nominal bore |
| 410 | 19.11.2 32 mm nominal bore |
| 411 | 19.11.3 40 mm nominal bore |
| 412 | 19.11.4 50 mm nominal bore |
| 413 | 19.11.5 65 mm nominal bore |
| 414 | 19.11.6 80 mm nominal bore |
| 415 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 416 | 19.12.1 15 mm nominal bore |
| 417 | 19.12.2 20 mm nominal bore |
| 418 | 19.12.3 25 mm nominal bore |
| 419 | Providing and fixing gun metal non-return valve of approved quality (screwed end)--Horizantal |
| 420 | 19.13.1 25 mm nominal bore |
| 421 | 19.13.2 32 mm nominal bore |
| 422 | 19.13.3 40 mm nominal bore |
| 423 | 19.13.4 50 mm nominal bore |
| 424 | 19.13.5 65 mm nominal bore |
| 425 | 19.13.6 80 mm nominal bore |
| 426 | 15 mm nominal bore |
| 427 | 20 mm nominal bore |
| 428 | Providing and fixing gun metal non-return valve of approved quality (screwed end)--Vertical |
| 429 | 15 mm nominal bore |
| 430 | 20 mm nominal bore |
| 431 | 19.13.1 25 mm nominal bore |
| 432 | 19.13.2 32 mm nominal bore |
| 433 | 19.13.3 40 mm nominal bore |
| 434 | 19.13.4 50 mm nominal bore |
| 435 | 19.13.5 65 mm nominal bore |
| 436 | 19.13.6 80 mm nominal bore |
| 437 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main-- 15 mm nominal bore |
| 438 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main-- 20 mm nominal bore |
| 439 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main--25 mm nominal bore |
| 440 | Providing and fixing uplasticized PVC connection pipe with brass unions--30 cm length for |
| 441 | 19.15.1.1 15 mm nominal bore |
| 442 | 19.15.1.2 20 mm nominal bore |
| 443 | Providing and fixing uplasticized PVC connection pipe with brass unions-- 45 cm length |
| 444 | 19.15.2.1 15 mm nominal bore |
| 445 | 19.15.2.2 20 mm nominal bore |
| 446 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet19.16.1 100 mm diameter |
| 447 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet19.16.2 150 mm diameter |
| 448 | C.I. / DUCTILE IRON PIPES AND SPECIALSLaying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 449 | Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. (excluding cost of specials) |
| 450 | Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc (Heavy class)19.19.1 Up to 300 mm dia. |
| 451 | Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc (Heavy class)19.19.2 Over 300 mm dia. |
| 452 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc ., suitable for flanged jointing as per IS : 153819.20.1 Up to 300 mm dia. |
| 453 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc ., suitable for flanged jointing as per IS : 153819.20.2 Over 300 mm dia. |
| 454 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : |
| 455 | 19.21.1 100 mm dia. pipe |
| 456 | 19.21.2 125 mm dia. pipe |
| 457 | 19.21.3 150 mm dia. pipe |
| 458 | 19.21.4 200 mm dia. pipe |
| 459 | 19.21.5 250 mm dia. pipe |
| 460 | 19.21.6 300 mm dia. pipe |
| 461 | 19.21.7 350 mm dia. pipe |
| 462 | 19.21.8 400 mm dia. pipe |
| 463 | 19.21.9 450 mm dia. pipe |
| 464 | 19.21.10 500 mm dia. pipe |
| 465 | 19.21.11 600 mm dia. pipe |
| 466 | Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead |
| 467 | 19.22.1 100 mm dia. pipe |
| 468 | 19.22.2 125 mm dia. pipe |
| 469 | 19.22.3 150 mm dia. pipe |
| 470 | 19.22.4 200 mm dia. pipe |
| 471 | 19.22.5 250 mm dia. pipe |
| 472 | 19.22.6 300 mm dia. pipe |
| 473 | 19.22.7 350 mm dia. pipe |
| 474 | 19.22.8 400 mm dia. Pipe |
| 475 | 19.22.9 450 mm dia. pipe |
| 476 | 19.22.10500 mm dia. pipe |
| 477 | 19.22.11 600 mm dia. pipe |
| 478 | Supplying pig lead at site of work. |
| 479 | Providing flanged joints to double flanged C.I. / D.I pipes and specials including testing to joints. |
| 480 | 19.24.1 80 mm dia. pipe |
| 481 | 19.24.2 100 mm dia. pipe |
| 482 | 19.24.3 125 mm dia. pipe |
| 483 | 19.24.4 150 mm dia. pipe |
| 484 | 19.24.5 200 mm dia. pipe |
| 485 | 19.24.6 250 mm dia. pipe |
| 486 | 19.24.7 300 mm dia. pipe |
| 487 | 19.24.8 350 mm dia. pipe |
| 488 | 19.24.9 400 mm dia. pipe |
| 489 | 19.24.10 450 mm dia. pipe |
| 490 | 19.24.11 500 mm dia. pipe |
| 491 | 19.24.12 600 mm dia. pipe |
| 492 | C.I. SLUICE VALVES, FIRE HYDRANTS AND FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). |
| 493 | 19.25.1 100 mm dia. |
| 494 | 19.25.1.1 Class I |
| 495 | 19.25.1.2 Class II |
| 496 | 19.25.2 125 mm dia. |
| 497 | 19.25.2.1 Class I |
| 498 | 19.25.2.2 Class II |
| 499 | 19.25.3 150 mm dia. |
| 500 | 19.25.3.1 Class I |
| 501 | 19.25.3.2 Class II |
| 502 | 19.25.4 200 mm dia. |
| 503 | 19.25.4.1 Class I |
| 504 | 19.25.4.2 Class II |
| 505 | 19.25.5 250 mm dia. |
| 506 | 19.25.5.1 Class I |
| 507 | 19.25.5.2 Class II |
| 508 | 19.25.6 300 mm dia. |
| 509 | 19.25.6.1 Class I |
| 510 | 19.25.6.2 Class II |
| 511 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.- With common burnt clay (non modular) bricks of class designation 7.5 |
| 512 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.19.27.1 For sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid. |
| 513 | 19.27.1.1 Chamber 60x60x75 cm |
| 514 | 19.27.1.2 Chamber 90x90x100 cm |
| 515 | 19.27.1.3 Chamber 120x120x100 cm |
| 516 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.19.27.2 For fire hydrant, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid.19.27.2.1 Chamber 60x60x75 cm |
| 517 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.19.27.3 For water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangements19.27.3.1 Chamber 60x45x50 cm |
| 518 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. |
| 519 | 19.28.1 15 mm diameter pipe. |
| 520 | 20 mm diameter pipe. |
| 521 | 25 mm diameter pipe. |
| 522 | 19.28.4 32 mm diameter pipe. |
| 523 | 19.28.5 40 mm diameter pipe. |
| 524 | 19.28.6 50 mm diameter pipe. |
| 525 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality. |
| 526 | 19.29.1 15 mm diameter pipe. |
| 527 | 19.29.2 20 mm diameter pipe. |
| 528 | 19.29.3 25 mm diameter pipe. |
| 529 | 19.29.4 32 mm diameter pipe. |
| 530 | 19.29.5 40 mm diameter pipe. |
| 531 | 19.29.6 50 mm diameter pipe. |
| 532 | Painting G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. |
| 533 | 19.30.1 15 mm diameter pipe. |
| 534 | 19.30.2 20 mm diameter pipe. |
| 535 | 19.30.3 25 mm diameter pipe. |
| 536 | 19.30.4 32 mm diameter pipe. |
| 537 | 19.30.5 40 mm diameter pipe. |
| 538 | 19.30.6 50 mm diameter pipe. |
| 539 | 19.30.7 65 mm diameter pipe. |
| 540 | 19.30.8 80 mm diameter pipe. |
| 541 | Providing and filling sand of coarser grade around the G.I. pipes in external work. |
| 542 | 19.31.1 15 mm diameter pipe. |
| 543 | 19.31.2 20 mm diameter pipe. |
| 544 | 19.31.3 25 mm diameter pipe. |
| 545 | 19.31.4 32 mm diameter pipe. |
| 546 | 19.31.5 40 mm diameter pipe. |
| 547 | 19.31.6 50 mm diameter pipe. |
| 548 | 19.31.7 65 mm diameter pipe. |
| 549 | 19.31.8 80 mm diameter pipe. |
| 550 | 19.31.9 100 mm diameter pipe. |
| 551 | 19.31.10 150 mm diameter pipes. |
| 552 | Boring with 100 mm diameter casing pipe for hand pump/tube well in all soil except ordinary hard rock requiring blasting including removing the casing pipe after the hand pipe / tube well is lowered and tested. |
| 553 | 19.34.1 Upto 6 meters depth. |
| 554 | 19.34.2 Beyond 6 meter and upto 12 meter depth |
| 555 | 19.34.3 Beyond 12 meter and upto 18 meter depth |
| 556 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. |
| 557 | Providing and fixing to filters and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. |
| 558 | Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. |
| 559 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 560 | 19.36.1 15 mm nominal bore |
| 561 | 19.36.2 20 mm nominal bore |
| 562 | 19.36.3 25 mm nominal bore |
| 563 | 19.36.4 32 mm nominal bore |
| 564 | 19.36.5 40 mm nominal bore |
| 565 | 19.36.6 50 mm nominal bore |
| 566 | 19.36.7 65 mm nominal bore |
| 567 | 19.36.8 80 mm nominal bore |
| 568 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. |
| 569 | 19.37.1 15 mm nominal bore |
| 570 | 19.37.2 20 mm nominal bore |
| 571 | 19.37.3 25 mm nominal bore |
| 572 | 19.37.4 32 mm nominal bore |
| 573 | 19.37.5 40 mm nominal bore |
| 574 | 19.37.6 50 mm nominal bore |
| 575 | 19.37.7 65 mm nominal bore |
| 576 | 19.37.8 80 mm nominal bore |
| 577 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 578 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 579 | C.P. BRASS FITTINGSProviding and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 580 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 581 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 582 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 583 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 584 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. |
| 585 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 586 | Providing and fixing Brass Ball cock of approved quality and make as per the direction of Engineer-In-Charge. |
| 587 | 15 mm dia. Nominal bore |
| 588 | 20 mm dia. Nominal bore |
| 589 | P.T.M.T. FITTING :Providing and fixing PTMT bib cock of approved quality and colour.- 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 590 | P.T.M.T. FITTING :Providing and fixing PTMT bib cock of approved quality and colour.: 15 mm nominal bore 122 mm long, weighing not less than 99 gms. |
| 591 | P.T.M.T. FITTING :Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long, weighing not less than 110 gms. |
| 592 | P.T.M.T. FITTING :Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 gms |
| 593 | Providing and fixing PTMT stop cock of approved quality and color. 19.46.1 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 594 | Providing and fixing PTMT stop cock of approved quality and color. 19.46.2 20 mm nominal bore 89 mm long, weighing not less than 88 gms. |
| 595 | Providing and fixing PTMT stop cock of approved quality and color. 19.46.3 Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms. |
| 596 | Providing and fixing PTMT pillar cock of approved quality and colour. 19.47.1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms. |
| 597 | Providing and fixing PTMT pillar cock of approved quality and colour. 19.47.2 15 mm nominal bore 125 mm long foam flow, weighing not less than 120 gms. |
| 598 | Providing and fixing PTMT, push cock of approved quality and colour. 19.48.1 15 mm nominal bore, 98 mm long, weighing not less than 75 gms. |
| 599 | Providing and fixing PTMT, push cock of approved quality and colour. 19.48.2 12 mm nominal bore, 80 mm long, weighing not less than 46 gms. |
| 600 | Providing and fixing PTMT grating of approved quality and colour. 19.49.1 Circular type-- 100 mm nominal dia. |
| 601 | Providing and fixing PTMT grating of approved quality and colour. 19.49.1 Circular type--125 mm nominal dia with 25mm waste hole |
| 602 | Providing and fixing PTMT grating of approved quality and colour. 19.49.2 Rectangular type with open able circular lid.--150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 603 | AIR VALVE AND WATER METER (BULK TYPE)Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).--50 mm dia. |
| 604 | AIR VALVE AND WATER METER (BULK TYPE)Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).- 80 mm dia. |
| 605 | AIR VALVE AND WATER METER (BULK TYPE)Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).- 100 mm dia. |
| 606 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) |
| 607 | 19.51.1 80 mm dia. nominal bore |
| 608 | 19.51.2 100 mm dia. nominal bore |
| 609 | 19.51.3 150 mm dia. nominal bore |
| 610 | 19.51.4 200 mm dia. nominal bore |
| 611 | Providing and fixing C.I dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. Complete conforming to IS: 2373. |
| 612 | 19.52.1 80mm dia |
| 613 | 19.52.2 100mm dia |
| 614 | 19.52.3 150mm dia |
| 615 | 19.52.4 200mm dia |
| 616 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. |
| 617 | 19.53.1 15mm nominal bore, 105mm long, weighing not less than 138gms. |
| 618 | 19.53.2 20mm nominal bore, 120mm long, weighing not less than 198gms. |
| 619 | 19.53.3 25mm nominal bore, 152mm long, weighing not less than 440gms. |
| 620 | 19.53.4 40mm nominal bore, 206mm long, weighing not less than 690 gms |
| 621 | 19.53.5 50mm nominal bore, 242mm long, weighing not less than 1240gms. |
| 622 | Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms. |
| 623 | Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40gms. |
| 624 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 625 | Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538. :--Upto 300 mm dia. |
| 626 | Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 :--Above 300 mm dia. |
| 627 | Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 :--Upto 300 mm dia. |
| 628 | Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 :--Above 300 mm dia. |
| 629 | Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523- Upto 600 mm dia. |
| 630 | Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 952319.59.2 Above 600 mm dia. |
| 631 | Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as per IS : 952319.60.1 Upto 600 mm dia. |
| 632 | Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as per IS : 952319.60.2 Above 600 mm dia. |
| 633 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. |
| 634 | 19.61.1 100 mm dia pipes |
| 635 | 19.61.2 150 mm dia pipes |
| 636 | 19.61.3 200 mm dia pipes |
| 637 | 19.61.4 250 mm dia pipes |
| 638 | 19.61.5 300 mm dia pipes |
| 639 | 19.61.6 350 mm dia pipes |
| 640 | 19.61.7 400 mm dia pipes |
| 641 | 19.61.8 450 mm dia pipes |
| 642 | 19.61.9 500 mm dia pipes |
| 643 | 19.61.10 600 mm dia pipes |
| 644 | 19.61.11 650 mm dia pipes |
| 645 | 19.61.12 700 mm dia pipes |
| 646 | 19.61.13 800 mm dia pipes |
| 647 | 19.61.14 900 mm dia pipes |
| 648 | 19.61.15 1000 mm dia pipes |
| 649 | Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : |
| 650 | 100 mm dia C.I. Double Flanged Pipe |
| 651 | 150 mm dia C.I. Double Flanged Pipe |
| 652 | 200 mm dia C.I. Double Flanged Pipe |
| 653 | 250 mm dia C.I. Double Flanged Pipe |
| 654 | 300 mm dia C.I. Double Flanged Pipe |
| 655 | 350 mm dia C.I. Double Flanged Pipe |
| 656 | 400 mm dia C.I. Double Flanged Pipe |
| 657 | 450 mm dia C.I. Double Flanged Pipe |
| 658 | 500 mm dia C.I. Double Flanged Pipe |
| 659 | 600 mm dia C.I. Double Flanged Pipe |
| 660 | Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 |
| 661 | 19.63.1 100 mm dia Ductile Iron Class K - 7 Pipes |
| 662 | 19.63.2 150 mm dia Ductile Iron Class K - 7 Pipes |
| 663 | 19.63.3 200 mm dia Ductile Iron Class K - 7 Pipes |
| 664 | 19.63.4 250 mm dia Ductile Iron Class K - 7 Pipes |
| 665 | 19.63.5 300 mm dia Ductile Iron Class K - 7 Pipes |
| 666 | 19.63.6 350 mm dia Ductile Iron Class K - 7 Pipes |
| 667 | 19.63.7 400 mm dia Ductile Iron Class K - 7 Pipes |
| 668 | 19.63.8 450 mm dia Ductile Iron Class K - 7 Pipes |
| 669 | 19.63.9 500 mm dia Ductile Iron Class K - 7 Pipes |
| 670 | 19.63.10 600 mm dia Ductile Iron Class K - 7 Pipes |
| 671 | 19.63.11 700 mm dia Ductile Iron Class K - 7 Pipes |
| 672 | 19.63.12 800 mm dia Ductile Iron Class K - 7 Pipes |
| 673 | 19.63.13 900 mm dia Ductile Iron Class K - 7 Pipes |
| 674 | 19.63.14 1000 mm dia Ductile Iron Class K - 7 Pipes |
| 675 | 19.63.15 100 mm dia Ductile Iron Class K - 9 Pipes |
| 676 | 19.63.16 150mm dia Ductile Iron Class K - 9 Pipes |
| 677 | 19.63.17 200 mm dia Ductile Iron Class K - 9 Pipes |
| 678 | 19.63.18 250 mm dia Ductile Iron Class K - 9 Pipes |
| 679 | 19.63.19 300 mm dia Ductile Iron Class K - 9 Pipes |
| 680 | 19.63.20 350 mm dia Ductile Iron Class K - 9 Pipes |
| 681 | 19.63.21 400 mm dia Ductile Iron Class K - 9 Pipes |
| 682 | 19.63.22 450 mm dia Ductile Iron Class K - 9 Pipes |
| 683 | 19.63.23 500 mm dia Ductile Iron Class K - 9 Pipes |
| 684 | 19.63.24 600 mm dia Ductile Iron Class K - 9 Pipes |
| 685 | 19.63.25 700 mm dia Ductile Iron Class K - 9 Pipes |
| 686 | 19.63.26 750 mm dia Ductile Iron Class K - 9 Pipes |
| 687 | 19.63.27 800 mm dia Ductile Iron Class K - 9 Pipes |
| 688 | 19.63.28 900 mm dia Ductile Iron Class K - 9 Pipes |
| 689 | 19.63.29 1000 mm dia Ductile Iron Class K - 9 Pipes |
| 690 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS : 8329 |
| 691 | 19.64.1 100 mm dia Ductile Iron Double Flanged |
| 692 | 19.64.2 150 mm dia Ductile Iron Double Flanged |
| 693 | 19.64.3 200 mm dia Ductile Iron Double Flanged |
| 694 | 19.64.4 250 mm dia Ductile Iron Double Flanged |
| 695 | 19.64.5 300 mm dia Ductile Iron Double Flanged |
| 696 | 19.64.6 350 mm dia Ductile Iron Double Flanged |
| 697 | 19.64.7 400 mm dia Ductile Iron Double Flanged |
| 698 | 19.64.8 450 mm dia Ductile Iron Double Flanged |
| 699 | 19.64.9 500 mm dia Ductile Iron Double Flanged |
| 700 | 19.64.10 600 mm dia Ductile Iron Double Flanged |
| 701 | 19.64.11 700 mm dia Ductile Iron Double Flanged |
| 702 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour19.65.1 15 mm nominal bore with 30 cm length. |
| 703 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour19.65.2 15 mm nominal bore with 45 cm length. |
| 704 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour19.66.1 15 mm nominal bore, weighing not less than 32gms |
| 705 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour19.66.2 20 mm nominal bore, weighing not less than 40gms |
| 706 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour19.66.3 25 mm nominal bore, weighing not less than 62gms |
| 707 | Cutting holes up to 30x30 cm in walls including making good the same: 19.67.1 With common burnt clay (non modular) bricks |
| 708 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 709 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 710 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
| 711 | Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per liter of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory. |
| 712 | 19.71.1 80 mm diameter C.I. pipe |
| 713 | 19.71.2 100 mm diameter C.I. pipe |
| 714 | 19.71.3 125 mm diameter C.I. pipe |
| 715 | 19.71.4 150 mm diameter C.I. pipe |
| 716 | 19.71.5 200 mm diameter C.I. pipe |
| 717 | 19.71.6 250 mm diameter C.I. pipe |
| 718 | 19.71.7 300 mm diameter C.I. pipe |
| 719 | 19.71.8 350 mm diameter C.I. pipe |
| 720 | 19.71.9 400 mm diameter C.I. pipe |
| 721 | 19.71.10 450 mm diameter C.I. pipe |
| 722 | 19.71.11 500 mm diameter C.I. pipe |
| 723 | 19.71.12 600 mm diameter C.I. pipe |
| 724 | Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per liter of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory : |
| 725 | 19.72.1 80 mm diameter C.I. pipe |
| 726 | 19.72.2 100 mm diameter C.I. pipe |
| 727 | 19.72.3 125 mm diameter C.I. pipe |
| 728 | 19.72.4 150 mm diameter C.I. pipe |
| 729 | 19.72.5 200 mm diameter C.I. pipe |
| 730 | 19.72.6 250 mm diameter C.I. pipe |
| 731 | 19.72.7 300 mm diameter C.I. pipe |
| 732 | 19.72.8 350 mm diameter C.I. pipe |
| 733 | 19.72.9 400 mm diameter C.I. pipe |
| 734 | 19.72.10 450 mm diameter C.I. pipe |
| 735 | 19.72.11 500 mm diameter C.I. pipe |
| 736 | 19.72.12 600 mm diameter C.I. pipe |
| 737 | Dismantling old C.I. pipes including excavation & refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead & making into blocks, including stacking of pipes at site lead up to 50 meter : |
| 738 | 19.73.1 80 mm diameter C.I. pipe |
| 739 | 19.73.2 100 mm diameter C.I. pipe |
| 740 | 19.73.3 125 mm diameter C.I. pipe |
| 741 | 19.73.4 150 mm diameter C.I. pipe |
| 742 | 19.73.5 200 mm diameter C.I. pipe |
| 743 | 19.73.6 250 mm diameter C.I. pipe |
| 744 | 19.73.7 300 mm diameter C.I. pipe |
| 745 | 19.73.8 350 mm diameter C.I. pipe |
| 746 | 19.73.9 400 mm diameter C.I. pipe |
| 747 | 19.73.10 450 mm diameter C.I. pipe |
| 748 | 19.73.11500 mm diameter C.I. pipe |
| 749 | 19.73.12 600 mm diameter C.I. pipe |
| 750 | Labour for cutting C.I. pipe with steel saw. |
| 751 | 19.74.1 80 mm diameter C.I. pipe |
| 752 | 19.74.2 100 mm diameter C.I. pipe |
| 753 | 19.74.3 125 mm diameter C.I. pipe |
| 754 | 19.74.4 150 mm diameter C.I. pipe |
| 755 | 19.74.5 200 mm diameter C.I. pipe |
| 756 | 19.74.6 250 mm diameter C.I. pipe |
| 757 | 19.74.7 300 mm diameter C.I. pipe |
| 758 | 19.74.8 350 mm diameter C.I. pipe |
| 759 | 19.74.9 400 mm diameter C.I. pipe |
| 760 | 19.74.10 450 mm diameter C.I. pipe |
| 761 | 19.74.11500 mm diameter C.I. pipe |
| 762 | 19.74.12 600 mm diameter C.I. pipe |
| 763 | Providing and fixing 15 mm nominal bore chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.per JIS standard 3448 complete with press type fitting (fitting shall be |
| 764 | Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00m spacing and also including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work – Exposed on wall |
| 765 | 19.76.1 15.88 mm outer dia pipe |
| 766 | 19.76.2 22.22 mm outer dia pipe |
| 767 | 19.76.3 28.58 mm outer dia pipe |
| 768 | 19.76.4 34.00 mm outer dia pipe |
| 769 | 19.76.5 42.70 mm outer dia pipe |
| 770 | 19.76.6 48.60 mm outer dia pipe |
| 771 | Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Concealed Pipe19.77.1 15.88 mm outer dia pipe |
| 772 | Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Concealed Pipe19.77.2 22.22 mm outer dia pipe |
| 773 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Coupling/Socket |
| 774 | 19.78.1 For 15.88 mm outer dia pipe |
| 775 | 19.78.2 For 22.22 mm outer dia pipe |
| 776 | 19.78.3 For 28.58 mm outer dia pipe |
| 777 | 19.78.4 For 34.00 mm outer dia pipe |
| 778 | 19.78.5 For 42.70 mm outer dia pipe |
| 779 | 19.78.6 For 48.60 mm outer dia pipe |
| 780 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge : Reducer |
| 781 | 19.79.1 For 22.22 mmx15.88 mm outer dia pipe |
| 782 | 19.79.2 For 28.58 mmx15.88 mm outer dia pipe |
| 783 | 19.79.3 For 28.58 mmx22.22 mm outer dia pipe |
| 784 | 19.79.4 For 34.00 mmx15.88 mm outer dia pipe |
| 785 | 19.79.5 For 34.00 mmx22.22 mm outer dia pipe |
| 786 | 19.79.6 For 34.00 mmx28.58 mm outer dia pipe |
| 787 | 19.79.7 For 42.70 mmx15.88 mm outer dia pipe |
| 788 | 19.79.8 For 42.70 mmx22.22 mm outer dia pipe |
| 789 | 19.79.9 For 42.70 mmx28.58 mm outer dia pipe |
| 790 | 19.79.10 For 42.70 mmx34.00 mm outer dia pipe |
| 791 | 19.79.11 For 48.60 mmx15.88 mm outer dia pipe |
| 792 | 19.79.12 For 48.60 mmx22.22 mm outer dia pipe |
| 793 | 19.79.13 For 48.60 mmx28.58 mm outer dia pipe |
| 794 | 19.79.14 For 48.60 mmx34.00 mm outer dia pipe |
| 795 | 19.79.15 For 48.60 mmx42.70 mm outer dia pipe |
| 796 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Slip Coupling/ Socket |
| 797 | 19.80.1 For 15.88 mm outer dia pipe |
| 798 | 19.80.2 For 22.22 mm outer dia pipe |
| 799 | 19.80.3 For 28.58 mm outer dia pipe |
| 800 | 19.80.4 For 34.00 mm outer dia pipe |
| 801 | 19.80.5 For 42.70 mm outer dia pipe |
| 802 | 19.80.6 For 48.60 mm outer dia pipe |
| 803 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge Elbow 90o |
| 804 | 19.81.1 For 15.88 mm outer dia pipe |
| 805 | 19.81.2 For 22.22 mm outer dia pipe |
| 806 | 19.81.3 For 28.58 mm outer dia pipe |
| 807 | 19.81.4 For 34.00 mm outer dia pipe |
| 808 | 19.81.5 For 42.70 mm outer dia pipe |
| 809 | 19.81.6 For 48.60 mm outer dia pipe |
| 810 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Reducing Elbow 90o |
| 811 | 19.82.1 For 22.22 mmx15.88 mm outer dia pipe |
| 812 | 19.82.2 For 28.58 mmx15.88 mm outer dia pipe |
| 813 | 19.82.3 For 28.58 mmx22.22 mm outer dia pipe |
| 814 | 19.82.4 For 34.00 mmx22.22 mm outer dia pipe |
| 815 | 19.82.5 For 34.00 mmx28.58 mm outer dia pipe |
| 816 | 19.82.6 For 42.70 mmx34.00 mm outer dia pipe |
| 817 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Equal Tee |
| 818 | 19.83.1 For 15.88 mm outer dia pipe |
| 819 | 19.83.2 For 22.22 mm outer dia pipe |
| 820 | 19.83.3 For 28.58 mm outer dia pipe |
| 821 | 19.83.4 For 34.00 mm outer dia pipe |
| 822 | 19.83.5 For 42.70 mm outer dia pipe |
| 823 | 19.83.6 For 48.60 mm outer dia pipe |
| 824 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Reducing Tee |
| 825 | 19.84.1 For 22.22 mmx15.88 mm outer dia pipe |
| 826 | 19.84.2 For 28.58 mmx15.88 mm outer dia pipe |
| 827 | 19.84.3 For 28.58 mmx22.22 mm outer dia pipe |
| 828 | 19.84.4 For 34.00 mmx15.88 mm outer dia pipe |
| 829 | 19.84.5 For 34.00 mmx22.22 mm outer dia pipe |
| 830 | 19.84.6 For 34.00 mmx28.58 mm outer dia pipe |
| 831 | 19.84.7 For 42.70 mmx15.88 mm outer dia pipe |
| 832 | 19.84.8 For 42.70 mmx22.22 mm outer dia pipe |
| 833 | 19.84.9 For 42.70 mmx28.58 mm outer dia pipe |
| 834 | 19.84.10 For 42.70 mmx34.00 mm outer dia pipe |
| 835 | 19.84.11 For 48.60 mmx15.88 mm outer dia pipe |
| 836 | 19.84.12 For 48.60 mmx22.22 mm outer dia pipe |
| 837 | 19.84.13 For 48.60 mmx28.58 mm outer dia pipe |
| 838 | 19.84.14 For 48.60 mmx34.00 mm outer dia pipe |
| 839 | 19.84.15 For 48.60 mmx42.70 mm outer dia pipe |
| 840 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Male Thread Tee |
| 841 | 19.85.1 For 15.88 mm outer dia.x15 mm nominal dia threaded |
| 842 | 19.85.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 843 | 19.85.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 844 | 19.85.4 For 28.58 mm outer dia x15 mm nominal dia threaded |
| 845 | 19.85.5 For 28.58 mm outer dia x20 mm nominal dia threaded |
| 846 | 19.85.6 For 28.58 mm outer dia x25 mm nominal dia threaded |
| 847 | 19.85.7 For 34.00 mm outer dia x15 mm nominal dia threaded |
| 848 | 19.85.8 For 34.00 mm outer dia x20 mm nominal dia threaded |
| 849 | 19.85.9 For 34.00 mm outer dia x25 mm nominal dia threaded |
| 850 | 19.85.10 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 851 | 19.85.11 For 42.70 mm outer dia x15 mm nominal dia threaded |
| 852 | 19.85.12 For 42.70 mm outer dia x20 mm nominal dia threaded |
| 853 | 19.85.13 For 42.70 mm outer dia x25 mm nominal dia threaded |
| 854 | 19.85.14 For 42.70 mm outer dia x32 mm nominal dia threaded |
| 855 | 19.85.15 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 856 | 19.85.16 For 48.60 mm outer dia x15 mm nominal dia threaded |
| 857 | 19.85.17 For 48.60 mm outer dia x20 mm nominal dia threaded |
| 858 | 19.85.18 For 48.60 mm outer dia x25 mm nominal dia threaded |
| 859 | 19.85.19 For 48.60 mm outer dia x32 mm nominal dia threaded |
| 860 | 19.85.20 For 48.60 mm outer dia x40 mm nominal dia threaded |
| 861 | 19.85.21 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 862 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Female Thread Tee |
| 863 | 19.86.1 For 15.88 mm outer dia x15 mm nominal dia threaded |
| 864 | 19.86.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 865 | 19.86.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 866 | 19.86.4 For 28.58 mm outer dia x15 mm nominal dia threaded |
| 867 | 19.86.5 For 28.58 mm outer dia x20 mm nominal dia threaded |
| 868 | 19.86.6 For 28.58 mm outer dia x25 mm nominal dia threaded |
| 869 | 19.86.7 For 34.00 mm outer dia x15 mm nominal dia threaded |
| 870 | 19.86.8 For 34.00 mm outer dia x20 mm nominal dia threaded |
| 871 | 19.86.9 For 34.00 mm outer dia x25 mm nominal dia threaded |
| 872 | 19.86.10 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 873 | 19.86.11 For 42.70 mm outer dia x15 mm nominal dia threaded |
| 874 | 19.86.12 For 42.70 mm outer dia x20 mm nominal dia threaded |
| 875 | 19.86.13 For 42.70 mm outer dia x25 mm nominal dia threaded |
| 876 | 19.86.14 For 42.70 mm outer dia x32 mm nominal dia threaded |
| 877 | 19.86.15 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 878 | 19.86.16 For 48.60 mm outer dia x15 mm nominal dia threaded |
| 879 | 19.86.17 For 48.60 mm outer dia x20 mm nominal dia threaded |
| 880 | 19.86.18 For 48.60 mm outer dia x25 mm nominal dia threaded |
| 881 | 19.86.19 For 48.60 mm outer dia x32 mm nominal dia threaded |
| 882 | 19.86.20 For 48.60 mm outer dia x40 mm nominal dia threaded |
| 883 | 19.86.21 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 884 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge Female Thread Connector/Adapter |
| 885 | 19.87.1 For 15.88 mm outer dia x15 mm nominal dia threaded |
| 886 | 19.87.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 887 | 19.87.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 888 | 19.87.4 For 28.58 mm outer dia x15 mm nominal dia threaded |
| 889 | 19.87.5 For 28.58 mm outer dia x20 mm nominal dia threaded |
| 890 | 19.87.6 For 28.58 mm outer dia x25 mm nominal dia threaded |
| 891 | 19.87.7 For 34.00 mm outer dia x25 mm nominal dia threaded |
| 892 | 19.87.8 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 893 | 19.87.9 For 42.70 mm outer dia x32 mm nominal dia threaded |
| 894 | 19.87.10 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 895 | 19.87.11 For 48.60 mm outer dia x40 mm nominal dia threaded |
| 896 | 19.87.12 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 897 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Male Thread Connector/Adapter |
| 898 | 19.88.1 For 15.88 mm outer dia x15 mm nominal dia threaded |
| 899 | 19.88.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 900 | 19.88.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 901 | 19.88.4 For 28.58 mm outer diax20 mm nominal dia threaded |
| 902 | 19.88.5 For 28.58 mm outer dia x25 mm nominal dia threaded |
| 903 | 19.88.6 For 34.00 mm outer dia x25 mm nominal dia threaded |
| 904 | 19.88.7 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 905 | 19.88.8 For 42.70 mm outer dia x32 mm nominal dia threaded |
| 906 | 19.88.9 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 907 | 19.88.10 For 48.60 mm outer dia x40 mm nominal dia threaded |
| 908 | 19.88.11 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 909 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge-Valve Connector |
| 910 | 19.89.1 For 15.88 mm outer dia x15 mm nominal dia threaded |
| 911 | 19.89.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 912 | 19.89.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 913 | 19.89.4 For 28.58 mm outer dia x25 mm nominal dia threaded |
| 914 | 19.89.5 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 915 | 19.89.6 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 916 | 19.89.7 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 917 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Female Threaded Elbow 90o |
| 918 | 19.90.1 For 15.88 mm outer dia x15 mm nominal dia threaded |
| 919 | 19.90.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 920 | 19.90.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 921 | 19.90.4 For 25.58 mm outer dia x25 mm nominal dia threaded |
| 922 | 19.90.5 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 923 | 19.90.6 For 42.70 mm outer dia x32 mm nominal dia threaded |
| 924 | 19.90.7 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 925 | 19.90.8 For 48.60 mm outer dia x40 mm nominal dia threaded |
| 926 | 19.90.9 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 927 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Male Threaded Elbow 90o |
| 928 | 19.91.1 For 15.88 mm outer dia x15 mm nominal dia threaded |
| 929 | 19.91.2 For 22.22 mm outer dia x15 mm nominal dia threaded |
| 930 | 19.91.3 For 22.22 mm outer dia x20 mm nominal dia threaded |
| 931 | 19.91.4 For 28.58 mm outer dia x25 mm nominal dia threaded |
| 932 | 19.91.5 For 34.00 mm outer dia x25 mm nominal dia threaded |
| 933 | 19.91.6 For 34.00 mm outer dia x32 mm nominal dia threaded |
| 934 | 19.91.7 For 42.70 mm outer dia x32 mm nominal dia threaded |
| 935 | 19.91.8 For 42.70 mm outer dia x40 mm nominal dia threaded |
| 936 | 19.91.9 For 48.60 mm outer dia x40 mm nominal dia threaded |
| 937 | 19.91.10 For 48.60 mm outer dia x50 mm nominal dia threaded |
| 938 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Cap |
| 939 | 19.92.1 For 15.88 mm outer dia pipe |
| 940 | 19.92.2 For 22.22 mm outer dia pipe |
| 941 | 19.92.3 For 28.58 mm outer dia pipe |
| 942 | 19.92.5 For 42.70 mm outer dia pipe |
| 943 | 19.92.6 For 48.60 mm outer dia pipe |
| 944 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Pipe Bridge |
| 945 | 19.93.1 For 15.88 mm outer dia pipe |
| 946 | 19.93.2 For 22.22 mm outer dia pipe |
| 947 | 19.93.3 For 28.58 mm outer dia pipe |
| 948 | Cromium plated (C.P) sanitary fittings NON-SCHDULE ITEMS |
| 949 | Providing and Fixing Cromium plated sanitary fittings of approved quality ( Cera,Jaquar,Parko Make or equivalent) complete Job |
| 950 | Bib Cock |
| 951 | Bib Cock (Two Way) |
| 952 | Brass Bib Cock Plain |
| 953 | Pillar Cock |
| 954 | Angle Valve |
| 955 | Angle Valve (2 in 1) |
| 956 | Concealed Stop Cock |
| 957 | Wash Basin mixer Single hole |
| 958 | Wash Basin mixer Double hole |
| 959 | Wall mixer(Non Telescopic) |
| 960 | Wall mixer (Telescopic) |
| 961 | Wall mixer (3 in 1) |
| 962 | Sink mixer |
| 963 | Towel Ring 20 mm dia |
| 964 | Towel Rail single 600 mm long |
| 965 | Towel Rack 600 mm |
| 966 | Health Faucet with required Chain Tube |
| 967 | C.P Cup |
| 968 | Grating 100 mm dia |
| 969 | Grating 75 mm dia |
| 970 | Grating 100 mm Square |
| 971 | Grating 75 mm Square |
| 972 | Paper Holder |
| 973 | Tumbler Holder |
| 974 | Soap Case |
| 975 | Hand shower with Chain |
| 976 | Over Head Shower arm 305 mm |
| 977 | spindle / disc |
| 978 | Jet Pin for W.C |
| 979 | Jet Pin for W.C with Chain Tube |
| 980 | Leg Pair |
| 981 | Nipples 25 mm to 50 mm 15mm dia |
| 982 | CP CUPS |
| 983 | Utinsil Baskets for Kitchen Cupboards |
| 984 | Wall Soap Dispensers Manual |
| 985 | Corner Shelves |
| 986 | Diverter |
| 987 | CP waste |
| 988 | G.I FITTINGS NON SCHDULE ITEMS |
| 989 | Providing and fixing G.I Tankey Nipples of approved quality and make as per the direction of Engineer-In-Charge. |
| 990 | Tankey Nipple 15 mm dia |
| 991 | Tankey Nipple 20mm dia |
| 992 | Tankey Nipple 25 mm dia |
| 993 | Tankey Nipple 32mm dia |
| 994 | Tankey Nipple 40 mm dia |
| 995 | Tankey Nipple 50 mm dia |
| 996 | Providing and fixing of G.I fittings of approved quality like Prakash Surya/ Jindal as approved) Complete Job |
| 997 | Elbow 15 mm dia. Nominal bore |
| 998 | Elbow 20 mm dia. Nominal bore |
| 999 | Elbow 25 mm dia. Nominal bore |
| 1000 | Elbow 32 mm dia. Nominal bore |
| 1001 | Elbow 40 mm dia. Nominal bore |
| 1002 | Elbow 50 mm dia. Nominal bore |
| 1003 | Tee 15 mm dia. Nominal bore |
| 1004 | Tee 20 mm dia. Nominal bore |
| 1005 | Tee 25 mm dia. Nominal bore |
| 1006 | Tee 32 mm dia. Nominal bore |
| 1007 | Tee 40 mm dia. Nominal bore |
| 1008 | Tee 50 mm dia. Nominal bore |
| 1009 | Union 15 mm dia. Nominal bore |
| 1010 | Union 20 mm dia. Nominal bore |
| 1011 | Union 25 mm dia. Nominal bore |
| 1012 | Union 32 mm dia. Nominal bore |
| 1013 | Union 40 mm dia. Nominal bore |
| 1014 | Union 50 mm dia. Nominal bore |
| 1015 | Un Equal Tee 15 x 20 mm dia. Nominal bore |
| 1016 | Un Equal Tee 15 x 25 mm dia. Nominal bore |
| 1017 | Un Equal Tee 15 x 32 mm dia. Nominal bore |
| 1018 | Un Equal Tee 15 x 40 mm dia. Nominal bore |
| 1019 | Un Equal Tee 15 x 50 mm dia. Nominal bore |
| 1020 | Un Equal Tee 20 x 25 mm dia. Nominal bore |
| 1021 | Un Equal Tee 20 x 32 mm dia. Nominal bore |
| 1022 | Un Equal Tee 20 x 40 mm dia. Nominal bore |
| 1023 | Un Equal Tee 20 x 50 mm dia. Nominal bore |
| 1024 | Socket 15 mm dia. Nominal bore |
| 1025 | Socket 20 mm dia. Nominal bore |
| 1026 | Socket 25 mm dia. Nominal bore |
| 1027 | Socket 32 mm dia. Nominal bore |
| 1028 | Socket 40 mm dia. Nominal bore |
| 1029 | Socket 50 mm dia. Nominal bore |
| 1030 | Nipple 15 mm dia. Nominal bore 50 mm Long |
| 1031 | Nipple 15 mm dia. Nominal bore 75 mm Long |
| 1032 | Nipple 15 mm dia. Nominal bore 100 mm Long |
| 1033 | Nipple 15 mm dia. Nominal bore 125 mm Long |
| 1034 | Nipple 15 mm dia. Nominal bore 150 mm Long |
| 1035 | Nipple 20x50 mm dia. Nominal bore |
| 1036 | Nipple 20x75 mm dia. Nominal bore |
| 1037 | Nipple 20x100 mm dia. Nominal bore |
| 1038 | Nipple 20x125 mm dia. Nominal bore |
| 1039 | Nipple 20x150 mm dia. Nominal bore |
| 1040 | Reducer 15 x 20 mm dia. Nominal bore |
| 1041 | Reducer 15 x 25 mm dia. Nominal bore |
| 1042 | Reducer 15 x 32 mm dia. Nominal bore |
| 1043 | Reducer 15 x 40 mm dia. Nominal bore |
| 1044 | Reducer 15 x 50 mm dia. Nominal bore |
| 1045 | Reducer 20 x 25 mm dia. Nominal bore |
| 1046 | Reducer 20 x 32 mm dia. Nominal bore |
| 1047 | Reducer 20 x 40 mm dia. Nominal bore |
| 1048 | Reducer 20 x 50 mm dia. Nominal bore |
| 1049 | Cross Over 15 mm dia. Nominal bore |
| 1050 | Cross Over 20 mm dia. Nominal bore |
| 1051 | PP-R Fittings NoN-Schdule Items |
| 1052 | Providing and fixing PP-R Tankey Nipples of approved quality and make as per the direction of Engineer-In-Charge. |
| 1053 | Tankey Nipple 15 mm dia |
| 1054 | Tankey Nipple 20mm dia |
| 1055 | Tankey Nipple 25 mm dia |
| 1056 | Tankey Nipple 32mm dia |
| 1057 | Tankey Nipple 40 mm dia |
| 1058 | Tankey Nipple 50 mm dia |
| 1059 | Providing and fixing PP-R Ball cock of approved quality and make as per the direction of Engineer-In-Charge. |
| 1060 | 15 mm dia. Nominal bore |
| 1061 | 20 mm dia. Nominal bore |
| 1062 | Providing andfixing 3 layer PP-R (Poly propylene Random copolymer) fittings conforming to IS: 15801 UV Stabilized and anti microbial fusion welded, having thermal stabilily for hot and cold water supply . . This includes testing of joints complete as per direction of Engineer-in charge. |
| 1063 | Coupler 20 mm dia. Nominal bore |
| 1064 | Coupler 25 mm dia. Nominal bore |
| 1065 | Coupler 32 mm dia. Nominal bore |
| 1066 | Coupler 40 mm dia. Nominal bore |
| 1067 | Coupler 50 mm dia. Nominal bore |
| 1068 | Elbow 900 20 mm dia. Nominal bore |
| 1069 | Elbow 900 25 mm dia. Nominal bore |
| 1070 | Elbow 900 32 mm dia. Nominal bore |
| 1071 | Elbow 900 40 mm dia. Nominal bore |
| 1072 | Elbow 900 50 mm dia. Nominal bore |
| 1073 | Equal Tee 20 mm dia. Nominal bore |
| 1074 | Equal Tee 25 mm dia. Nominal bore |
| 1075 | Equal Tee 32 mm dia. Nominal bore |
| 1076 | Equal Tee 40 mm dia. Nominal bore |
| 1077 | Equal Tee 50 mm dia. Nominal bore |
| 1078 | End Plug 20 mm dia. Nominal bore |
| 1079 | End Plug 25 mm dia. Nominal bore |
| 1080 | End Plug 32 mm dia. Nominal bore |
| 1081 | Gate Valve 20 mm dia. Nominal bore |
| 1082 | Gate Valve 25 mm dia. Nominal bore |
| 1083 | Gate Valve 32 mm dia. Nominal bore |
| 1084 | Gate Valve 40 mm dia. Nominal bore |
| 1085 | Gate Valve 50 mm dia. Nominal bore |
| 1086 | Ball Valve 20 mm dia. Nominal bore |
| 1087 | Ball Valve 25 mm dia. Nominal bore |
| 1088 | Ball Valve 32 mm dia. Nominal bore |
| 1089 | Ball Valve 40 mm dia. Nominal bore |
| 1090 | Ball Valve 50 mm dia. Nominal bore |
| 1091 | Cross Over 20 mm dia. Nominal bore |
| 1092 | Cross Over 25 mm dia. Nominal bore |
| 1093 | Cross Over 32 mm dia. Nominal bore |
| 1094 | Four Way Tee 20 mm dia. Nominal bore |
| 1095 | Four Way Tee 25 mm dia. Nominal bore |
| 1096 | Four Way Tee 32 mm dia. Nominal bore |
| 1097 | Tank Connector 20 mm dia. Nominal bore |
| 1098 | Tank Connector 25 mm dia. Nominal bore |
| 1099 | Tank Connector 32 mm dia. Nominal bore |
| 1100 | Male Thread adapto 20x15mm dia. Nominal bore |
| 1101 | Male Thread adapto 20x20mm dia. Nominal bore |
| 1102 | Male Thread adapto 25x15mm dia. Nominal bore |
| 1103 | Male Thread adapto 25x20mm dia. Nominal bore |
| 1104 | Male Thread adapto 32x20mm dia. Nominal bore |
| 1105 | Male Thread adapto 32x25mm dia. Nominal bore |
| 1106 | Male Thread Elbow 20x15mm dia. Nominal bore |
| 1107 | Male Thread Elbow 20x20mm dia. Nominal bore |
| 1108 | Male Thread Elbow 25x15mm dia. Nominal bore |
| 1109 | Male Thread Elbow 25x20mm dia. Nominal bore |
| 1110 | Male Thread Elbow 32x20mm dia. Nominal bore |
| 1111 | Male Thread Elbow 32x25mm dia. Nominal bore |
| 1112 | Male Thread Tee 20x15mm dia. Nominal bore |
| 1113 | Male Thread Tee 20x20mm dia. Nominal bore |
| 1114 | Male Thread Tee 25x15mm dia. Nominal bore |
| 1115 | Male Thread Tee 25x20mm dia. Nominal bore |
| 1116 | Female Thread adapto 20x15mm dia. Nominal bore |
| 1117 | Female Thread adapto 20x20mm dia. Nominal bore |
| 1118 | Female Thread adapto 25x15mm dia. Nominal bore |
| 1119 | Female Thread adapto 25x20mm dia. Nominal bore |
| 1120 | Female Thread adapto 32x20mm dia. Nominal bore |
| 1121 | Female Thread adapto 32x25mm dia. Nominal bore |
| 1122 | Female Thread Elbow 20x15mm dia. Nominal bore |
| 1123 | Female Thread Elbow 20x20mm dia. Nominal bore |
| 1124 | Female Thread Elbow 25x15mm dia. Nominal bore |
| 1125 | Female Thread Elbow 25x20mm dia. Nominal bore |
| 1126 | Female Thread Elbow 32x20mm dia. Nominal bore |
| 1127 | Female Thread Elbow 32x25mm dia. Nominal bore |
| 1128 | Female Thread Tee 20x15mm dia. Nominal bore |
| 1129 | Female Thread Tee 20x20mm dia. Nominal bore |
| 1130 | Female Thread Tee 25x15mm dia. Nominal bore |
| 1131 | Female Thread Tee 25x20mm dia. Nominal bore |
| 1132 | Female Thread Tee 32x20mm dia. Nominal bore |
| 1133 | Female Thread Tee 32x25mm dia. Nominal bore |
| 1134 | PVC Fittings NoN-Schdule Items |
| 1135 | Providing and Fixing PVC fittings (Type ''B'') of approved quality ( Prince/Finolex/Jinadal/Astral Make or equivalent) complete |
| 1136 | Plain Bend 75 mm dia |
| 1137 | Plain Bend 100 mm dia |
| 1138 | Plain Bend 150 mm dia |
| 1139 | Door Bend 75 mm dia |
| 1140 | Door Bend 100 mm dia |
| 1141 | Door Bend 150 mm dia |
| 1142 | Plain Tee 75 mm dia |
| 1143 | Plain Tee 100 mm dia |
| 1144 | Plain Tee 150 mm dia |
| 1145 | Plain Equal Junction 75 mm dia |
| 1146 | Plain Equal Junction 100 mm dia |
| 1147 | Door Tee 75 mm dia |
| 1148 | Door Tee 100 mm dia |
| 1149 | Door Tee 150 mm dia |
| 1150 | Collar 75 mm dia |
| 1151 | Collar 100 mm dia |
| 1152 | Collar 150 mm dia |
| 1153 | Floor Trap 75 mm dia |
| 1154 | Floor Trap 100 mm dia |
| 1155 | P/S Trap 100 mm dia |
| 1156 | off set 75 mm dia |
| 1157 | off set 100 mm dia |
| 1158 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : |
| 1159 | 20.7.1.2 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1160 | 20.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885 |
| 1161 | 20.7.2Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not les1:-With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1162 | 20.7.2Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885 |
| 1163 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1164 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With Sewer bricks conforming to IS : 4885 |
| 1165 | 20.7.4Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1166 | 20.7.4Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With Sewer bricks conforming to IS : 4885 |
| 1167 | Extra for depth for manholes Size 90x80 cm |
| 1168 | 20.8.1.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1169 | 20.8.1.2 With Sewer bricks conforming to IS : 4885 |
| 1170 | Extra for depth for manholes Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1171 | Extra for depth for manholes Size 120x90 cm With Sewer bricks conforming to IS : 4885 |
| 1172 | Supplying and fixing C.I. cover without frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 1173 | Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. |
| 1174 | Supplying and fixing C.I. cover without frame for manholes: 560 mm diameter C.I. cover ( heavy duty) the weight of the cover to be not less than 108 kg |
| 1175 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. LD - 2.5 |
| 1176 | 20.15.1.1 Rectangular shape 600x450 internal dimensions |
| 1177 | 20.15.1.2 Square shape 450mm internal dimensions |
| 1178 | 20.15.1.3 Circular shape 450mm internal diameter |
| 1179 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. MD - 10 |
| 1180 | 20.15.2.1 Square shape 450mm internal dimensions |
| 1181 | 20.15.2.2 Circular shape 500mm internal diameter |
| 1182 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality HD - 20 Circular shape 560mm internal diameter |
| 1183 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality -EHD - 35 Circular shape 560mm internal dia. |
| 1184 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. |
| 1185 | Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead as per directions of Engineer-in-Charge: |
| 1186 | 20.20.1 Rectangular manhole 90x80 cm and 45 cm deep |
| 1187 | 20.20.2 Rectangular manhole 120x90 cm and 90 cm deep |
| 1188 | 20.20.3 Rectangular arch type manhole 140x90 cm and 2.45 m deep |
| 1189 | 20.20.4 Circular manhole 122 cm diameter and 1.68m deep |
| 1190 | Extra for depth of manholes dismantled : |
| 1191 | 20.21.1 Rectangular manhole 90x80 cm and beyond 45 cm depth |
| 1192 | 20.21.2 Rectangular manhole 120x90 cm and beyond 90 cm depth |
| 1193 | 20.21.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m depth ( upto 4.25 m depth) |
| 1194 | 20.21.4 Circular manhole 122 cm diameter and beyond 1.68m depth ( upto 2.29 m depth) |
| 1195 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately). |
| 1196 | 20.22.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 |
| 1197 | 20.22.2 Rectangular manhole 120x90 cm with circularcover 500 mm dia of grade MD - 10 |
| 1198 | 20.22.3 Rectangular manhole 120x90 cm with circularcover 560 mm dia of grade HD - 20 |
| 1199 | 20.22.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 |
| 1200 | Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: |
| 1201 | 20.23.1 Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating. |
| 1202 | 20.23.2 Chamber size 45x45x77.50 cm including precast R.C.C grating with frame 450x100 mm vertical grating. |
| 1203 | 20.23.3 Chamber size 110x50x77.50cm including precast R.C.C grating with frame 500x450 mmhorizontal and 450x100 mm vertical grating. |
| 1204 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 1205 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. |
| 1206 | Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 ( 1 cement : 1 fine sand) including testing of joints etc. complete: |
| 1207 | 20.28.1 100 mm dia |
| 1208 | 20.28.2 150 mm dia |
| 1209 | P/F of rubber foam insulation of standard quality as approved to G.I/PPR fittings within the thickness of rubberfoam insulation not less than 15mm including wrapping the rubber foam with binding wire all complete job as per the directions of enhineer-in-charge for:- |
| 1210 | 25mm dia |
| 1211 | 32mm dia |
| 1212 | 40mm dia |
| 1213 | Clearing jungle incl. uprooting of rank vegetation,grass,brush wood,trees and saplings of girth upto 30cmm measuread at a height of 1mtr above ground level and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 1214 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 1215 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 1216 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : |
| 1217 | 15.44.1 15 mm to 40 mm nominal bore. |
| 1218 | 15.44.2 Above 40 mm nominal bore |
| 1219 | Extra for brick work in: Square or rectangular pillars. |
| 1220 | Providing and fixing PVC manhole cover heavy duty of required shape and approved quality. |
| 1221 | 225 x 225mm |
| 1222 | 300 x 300mm |
| 1223 | 450 x 450mm |
| 1224 | 600 x 600mm |
| 1225 | Construction of brick masonary man hole on a base of cement concrete 1:2:4 with plastering the inner surface in 1:4 cement mortar with a coat of floating cement concrete with MS manhole cover and frame all complete as per the directions of incharge engineer at site. |
| 1226 | 1' x 1' x 1' |
| 1227 | 1'-6'' x 1'-6'' x 1'-6'' |
| 1228 | 2'-0'' x 2'-0'' x 1'-6'' |
| 1229 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws -Budloo/fir wood. |
| 1230 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600 x 600mm. |
| 1231 | Providing and fixing white vanity wash basin of standard size (Parryware / hindware / cera or equivalent) including all necessary fittings and fixtures as per the directions of Engineer Incharge at site complete. |
| 1232 | Flushing cistern PVC 10 liter capacity (low level) white with fittings, accessories & flush pipe. |
| 1233 | Epoxy Grout |
| 1234 | Providing and fixing of tissue holder of approved make including cost of all accessories complete as per the direction of Engineer-in-charge.-Automatic |
| 1235 | Providing and fixing of tissue holder of approved make including cost of all accessories complete as per the direction of Engineer-in-charge. - Manual |
| 1236 | Providing and fixing of sensor urinal of approved make including cost of all accessories complete as per the direction of Engineer-in-charge. |
| 1237 | Providing and fixing of hand dryer ( electric ) infra red Jaguar make including cost of all accessories complete as per the direction of Engineer- in-charge. |
| 1238 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
| 1239 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 1240 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 1241 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level. |
| 1242 | Labour charges for brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 1243 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with |
| 1244 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 1245 | 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 1246 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 1247 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 1248 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 coarse sand) |
| 1249 | 20mm cement plaster finished with a floating coat of neat cement of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 1250 | Providing and fixing of PVC pipe (Type B) of approved quality (Prince / Finolex / Jindal / Astral make ) in proper gradient in excavated trenches including jointing and refilling the excavated material and refurbishing complete incld carriage of excavation. |
| 1251 | 150mm nominal dia |
| 1252 | 100mm nominal dia |
| 1253 | 75mm nominal dia |
| 1254 | 50mm nominal dia |
| 1255 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Dark shade using ordinary cement. |
| 1256 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. 50 meter beyond 1 m from cutting edge. All kinds of soil. |
| 1257 | Providing and laying stone soling (Hand packed) in trenches incl. ramming, dressing ,watering etc. incl. all leads, lifts and carriage upto site of work complete. |
| 1258 | Engagement of meson along with equipments for doing necessary work like easing of doors and windows and like all complete as per the directions Engineer Incharge at site all complete. |
| 1259 | Engagement of Labours / Helpers along with equipments for doing necessary work as per the directions Engineer Incharge at site all complete. |
| 1260 | Providing wood work in making platform for water storage tank of popular wood |
| 1261 | Engagement of Tata mobile for disposal of dismantled material out of the municipal limits along with loading and unloading of material. |
| 1262 | Raising / Repairing of manhole cover and frame slab to required level incld dismantling existing slab and making good the damage as required in brick masonary incld cement plaster (1:4) complete incld disposal of unserviceable material beyond the municipal limits as directed by EIC. |
| 1263 | 1' x 1' x 1' |
| 1264 | 1'-6'' x 1'-6'' x 1'-6'' |
| 1265 | 2'-0'' x 2'-0'' x 1'-6'' |
| 1266 | Providing and fixing CI mainhole covers of required size along with frames as per the directions of Engineer Incharge at site. |
| 1267 | 1' x 1' x 1' |
| 1268 | 1.5' x 1.5' |
| 1269 | 2' x 2' |
| 1270 | Providing and fixing of brass ball cock of approved quality and make as per the directions of Engineer Incharge at site. (15mm) |
| 1271 | Providing G.I fittings |
| 1272 | G.I Reducer 3/4 x 1/5 |
| 1273 | Dismantling of old damaged tiles and cement plaster and like from walls including ranking out joints including disposal of malba outside municipal limits as directed by Engineer Incharge at site. |
| 1274 | Providing and fixing Ist quality ceramic glazed wall tiles (Digital Series) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete. |
| 1275 | Providing and fixing Ist quality ceramic glazed floor tiles (Digital Series and Anti skid) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- inCharge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete. |
| 1276 | Providing and laying Vitrified tiles in floor/walls with different sizes (thickness to be specified by the manufcturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). size of tiles 600x1200mm. |
| 1277 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 1278 | Providing and fixing 12mm thick frameless toughened glass of approved brand and manufacture incld providing and fixing to and bottom pivot and making necessary holes etc for fixing required door fittings all complete as per directions of Engineer Incharge at site. |
| 1279 | Providing and fixing of toughned glass door fittings of standard quality as per directions of Engineer Incharge at site. |
| 1280 | L-connection |
| 1281 | Wheel Set |
| 1282 | steel Rod incld steel channel |
| 1283 | Fixed Rod |
| 1284 | Door Seal |
| 1285 | Stainless steel 18 inch door handle |
| 1286 | Stainless steel door lock |
| 1287 | Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw with ALL FITTINGS AND FASTNINGS LIKE HANDLE, TOWER BOLT100 mm etc . Including two or more coats of synthetic enamel paint with one of coat of wood primer, of K.D Wood including all hardware fittings. |
| 1288 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws . Including two or more coats of synthetic enamel paint with one of coat of wood primer, |
| 1289 | Providing and fixing 35 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan Particle board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) First. Class K.D/Silver wood. |
| 1290 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately).KD Wood. |
| 1291 | Providing and fixing of imported PVC panelling of approved make and pattern including base work of GI channels with necessary screw and cornice at the edge with all the carriage complete as per the direction of EIC at site |
| 1292 | Providing and fixing PVC manhole lid as per the directions of Engineer Incharge at site. |
| 1293 | 1' x 1' x 1' |
| 1294 | 1'-6'' x 1'-6'' x 1'-6'' |
| 1295 | 2'-0'' x 2'-0'' x 1'-6'' |
| 1296 | Providing and fixing of blinders for door / windows openings with imported fabric including cost of alumunium channel, operating system etc all complete as per the directions of Engineer Incharge at site. Vertical blinds. |
| 1297 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 1298 | Dismantling cistern including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 1299 | Carriage of material by mechanical transport from source upto site of work. |
| 1300 | Sand,. Stone aggregate below 40mm nominal size. (15 Kms) |
| 1301 | Bricks (20 Kms) |
| 1302 | Skilled Labour |
| 1303 | unskilled Labour Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
