|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge , thickness, including Nainital or similar pattern roof covering etc, , complete all as specified and as directed. |
| 2 | S&F 0.63 mm thick Galvanised , corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws, washers, and L- type or J- type or cranked hook bolts in lie of screw in roofs , walls etc. with grade of zinc coating 275 etc, complete all as specified and as directed. |
| 3 | S&F 0.63 mm thick Plain ,galvanised , mild steel sheeting , in ridges, hips, vally gutters, drip , straight flashings and fixed with coach screws, washers, and L-type or Jtype or cranked hook bolts in lie of screw in roof , wall etc. (length and girth as fixed ) with grade of zinc coating 275 mm etc , complete all as specified and as directed. . |
| 4 | Refixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 5 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting , by a coating with moderant solution including washing and cleaning and applying two coat synthetic enamel paint in comoflauging pattern over a coat of zinc chrome , red oxide etc , complete all as specified and as directed. . Note: camoflazing pattern shall be directed in GE. |
| 6 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 7 | Refixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 8 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping, complete all as specified and as directed. |
| 9 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and as directed. |
| 10 | M&L for Second class soft-wood clean sawn in scantlings, complete all as specified and as directed. |
| 11 | Dismantling of boarding, any description , fixed in any position with nails etc , complete all as specified and as directed. . |
| 12 | M&L for Refixing only Weather boarding, 25 mm thick second class soft wood, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 13 | M&L for Weather boarding, 25 mm thick second class soft wood, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 14 | M&L for 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as use in eaves board, complete all as specified and as directed. |
| 15 | M&L for painting wooden newly untreated Surfaces two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise descri-bed,over 10cm width or girth, complete all as specified and as directed. |
| 16 | M&L for painting wooden Old Surfaces two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise descri-bed,over 10cm width or girth, complete all as specified and as directed. |
| 17 | M&L for Plain fillets. square,rectangular or Triangular Exc 13 & n.exc 25 sqcm in section, use in second class softwood clean sawn, secured with nails or brads, complete all as specified and as directed. |
| 18 | M&L for Plain fillets. square,rectangular or Triangular Exc 6 & n.exc 13 sqcm in section, use in second class softwood clean sawn, secured with nails or brads, complete all as specified and as directed. |
| 19 | Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed work, complete all as specified and as directed. |
| 20 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, complete all as specified and as directed. |
| 21 | M&L for 6 mm (5 No. of ply ) thick plywood , grade BWR, type BB fixed with nails to timber framed work as in wall etc, complete all as specified and as directed. |
| 22 | M&L for Veneered decorative 4mm plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with wall screws to timber frame work, complete all as specified and as directed. |
| 23 | M&L for Veneered decorative 4mm plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with ceiling/flat or sloping screws to timber frame work, complete all as specified and as directed. |
| 24 | M&L of softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated on wall of 10-15mm , complete all as specified and as directed. |
| 25 | M&L of 10-15mm softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated on ceiling 10-15mm, complete all as specified and as directed. |
| 26 | M&L of softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated on wall of 10-15mm, complete all as specified and as directed. |
| 27 | M&L of softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated on ceiling 10-15mm, complete all as specified and as directed. |
| 28 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 29 | M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 30 | M&L for Cement concrete type D-2, 1:4:8 100mm thick(40mm graded aggregate) as use in sub base, complete all as specified and as directed. |
| 31 | M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base complete , complete all as specified and as directed. |
| 32 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cm (1:4), complete all as specified and as directed. |
| 33 | M&L for Non - skid Ceramic Colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 34 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 35 | M&L for Virified Ceramic Dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 37 | M&L for vitrified ceramic light Shade 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in skirting / dado over 10 mm thick rendering in cement mortar 1:4,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete , complete all as specified and as directed. . |
| 38 | M&L for Glazed ceramic tiles 450mmx 250mm x 7mm thick, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surface, complete all as specified and as directed. |
| 39 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 40 | Taking down Chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 41 | Refixing in Same Opening Chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 42 | S&F for steel work such as in hold fasts conforming to similar articals Fe-290 Gde E-165, complete all as specified and as directed. |
| 43 | M&L for PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc, complete all as specified and as directed. |
| 44 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 45 | S&F for Factory Made Solid PVC Moulded with particle board core Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 46 | M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed 2nd class softwood, complete all as specified and as directed. |
| 47 | M&L for Plain, framed,panelled shutters 2nd class soft (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed. |
| 48 | M&L for Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 49 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 50 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 51 | M&L for Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including Hacking out old broken glass, complete all as specified and as directed. |
| 52 | S&F in repair Butt hinges 75mm long, Medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 53 | S&F in repair Butt hinges 100mm long, Medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 54 | S&F in repair aluminium handles 150mm long, cast type, stove enamelled black, complete all as specified and as directed. |
| 55 | S&F inrepair Aluminium anodised, barrel tower bolts 100mm long of extruded section and fixed, complete all as specified and as directed. |
| 56 | S&F in repair aluminium handles 100mm long, cast type, stove enamelled black, complete all as specified and as directed. |
| 57 | S&F in repair Aluminium alloy 150mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 58 | Demolition of pcc block or stone/ boulder masonary, built in cement mortar(1:4), complete all as specified and as directed. |
| 59 | M&L for Precast cement concrete type C-1 1:3:6 (Using 20 mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed. |
| 60 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc , complete all as specified and as directed. . |
| 61 | M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surfaces even and smooth without using extra cement etc, complete all as specified and as directed. |
| 62 | M&L for 10 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surfaces even and smooth without using extra cement etc, complete all as specified and as directed. |
| 63 | M&L for painting Preparing new untreated plaster surface of walls and applying two coat of cement based paint in comoflaying pattern etc, complete all as specified and as directed. |
| 64 | M&L for painting preparing new unterated two coat oil bound distemper paint on walls, complete all as specified and as directed. |
| 65 | M&L for painting Preparing oId surface of walls and applying two coat of cement based paint in comoflaying pattern etc, complete all as specified and as directed. . |
| 66 | M&L for painting preparing Old surface two coat oil bound distemper paint on walls, complete all as specified and as directed. |
| 67 | M&L for painting preparing Old surface two coat oil bound distemper paint on Ceiling, complete all as specified and as directed. |
| 68 | Taking up or down 20 mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 69 | S& F 20 mm tubes , medium grade galvanised , with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 70 | Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 71 | S& F 15 mm tubes , medium grade galvanised , with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 72 | S&F in repairs 15 mm stop/ gate valves cast copper alloy, but fancy type chromium plated ,screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed. |
| 73 | S& F in repairs 15 mm Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed. |
| 74 | S& F in repairs 15 mm Bib taps , cast copper alloy fancy type , with crutch or butterfly handles, screwed for iron pipe or for brass furrule and fixed, complete all as specified and as directed. |
| 75 | S&F in repairs PVC valveless , syphonic action type, flushing cistern, low level 10 litres capacity white , with inlet ball valve , float and handle including brackets, complete all as specified and as directed. . |
| 76 | S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern ), white , including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc, complete all as specified and as directed. |
| 77 | S&F in repairs Vitreous China bowl Urinal flat back , size of 465 x355 x 265 mm white (minium with grating and union for discharge pipe , including connections to flushing pipe and outgoing pipes, complete all as specified and as directed. |
| 78 | S&F in repair Vitreous China wash basin, white , flate back, size 550 x 400 mm including cutting for and pinning in ends of brackets or errecting stand and 32 mm waste fittings, brass, chromium plated for galzed ware basin, etc with long screwed shanks and flu-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. |
| 79 | S&F in repair Vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe etc. complete including making good to floor, complete all as specified and as directed. |
| 80 | Demolition and breaking up 110 mm dia Cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed. |
| 81 | M&L for Reinforced concrete pipes150mm dia, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 82 | M&L for 100 mm outlet diameter of Cast iron floor trap , with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) etc , complete all as specified and as directed. . |
| 83 | Dismantling water tanks capacity exc 500 & n. exc 1000 litres etc, complete all as specified and as directed. . |
| 84 | S&F of Rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position capacity 500 Ltrs , complete all as specified and as directed. |
| 85 | S&F in repair Anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling , complete all as specified and as directed. . |
| 86 | M&L for fixed in repair 10 mm thick non asbestos fiber cement building boards fixed or laid/inserted to timber/GI/aluminium framed work in ceiling flat or sloping etc , complete all as specified and as directed. . |
| 87 | S&F inrepair shelf of PTMT fixed withh and including chromium plated brass screws and wooden/plastic cleats (Min weight 300 grms) etc , complete all as specified and as directed. |
| 88 | S & F in repair Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Mnimum weight 190 grams) etc , complete all as specified and as directed. |
| 89 | M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded aggregate) in plinth protection and hard standing finish even and fair w/o using extera cement, complete all as specified and as directed. |
| 90 | M&L for 18/19mm thick Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber, complete all as specified and as directed. |
| 91 | S&F Decorative laminates type I, 1.5mm thick (High Glossy Finish), or surface finish, colour and pattern as approved by GE, complete all as specified and as directed. |
| 92 | M&L for 18/19mm thick prelaminated particle board in repair, exterior grade, prelaminated both side with decorative choice lamination, fixed with nails to timber frame work, complete all as specified and as directed. |
| 93 | S & F in repairs 40 mm Continuous (Piano) hinges, mild steel , bright finish or electrogalvanixed, complete all as specified and as directed. |
| 94 | S & F in repairs 150 mm Extruded brass handles, fabricated type polished, complete all as specified and as directed. |
| 95 | S & F in repairs 50 mm Brass Lock, cupboard, Grade I in 2 levers, complete all as specified and as directed. |
| 96 | Note:- Schedule of credit Rs 2,03,085.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
