|
| 1 | Schedule 'A' |
| 2 | Repairs to Teapoy, 600 mm X 450 mm X 540 mm (FD– 382, 278) |
| 3 | Removing the following U/S components of Teapoy and providing new components of size and shape shown in Drg and polishing all exposed parts of Teapoy after repairs / replacement of parts:- |
| 4 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 5 | Legs made of IInd class Hard wood |
| 6 | Top batten stiffener short made of IInd class Hard wood |
| 7 | Top batten stiffener long made of IInd class Hard wood |
| 8 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 9 | Repairs to TABLE DRESSING LADIES WITH STOOL (FD/MAP-II/07) |
| 10 | M&L after removing the existing U/s parts from Table dressing ladies repairing including S&F new parts of Table dressing ladies and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing ladies with one coat of spirit polish after preparation of surface |
| 11 | Mirror shall be of 5.5 mm thick, Make ' MODIGUARD ' duly Teak wood 6 mm thick frame and 6 mm thick plywood BWR Gde 6 mm thick on back side of the frame |
| 12 | Top 18 mm thick pre laminated particle board one side Teak finish and one side veneered of Make Action Tesa with 4mm thick Teak wood edging around. |
| 13 | Removing broken Handles, S&F new 75mm long D shaped stainless steel handle as specified. |
| 14 | Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 350 per meter size of cushion 440x350x75mm thick |
| 15 | Removing of old existing cushion's and replacing with new cushions of size 440 x 350x75 mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified. |
| 16 | Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick |
| 17 | Removing broken / UNSV Magnet Catch and S&F new Magnet Catch all as specified and shown in Drg. |
| 18 | Repairs to Table bed side (FD/E6/MAP/15(R ) |
| 19 | Removing U/S top and S&F new top made of 19mm thick pre laminated particle board of BWR gde confirming to IS:303 all as shown in drg and directed by Engr-in- Charge |
| 20 | Removing of U/s handle 100 mm long and S&F new handle 100mm long powder coated non ferrous metal alloy all as per drg and as specified. |
| 21 | Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick |
| 22 | S&F of PVC Shoe |
| 23 | Repairs to Chair dining JCOs/OR (FD-279, 228, FD/MAP/II/05) |
| 24 | Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:- |
| 25 | Rear leg made of size 30x55x890mm IInd class Hard wood |
| 26 | Front leg made of size 30 x 55 x 460 mm IInd class Hard wood |
| 27 | Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood |
| 28 | Seat stiffener duly holed for canning made out of IInd class Hardwood of size 440x65x30mm |
| 29 | S&F of PVC Shoe |
| 30 | Removing of UNSV /Broken PVC seat of chair dining JCO/Ors and providing new seat 4mm thick with 4x10mm thick Ribs moulded alongwith seat in single piece & screwed with frame Make AMKO. All as specified in drg and as directed by Engr-in charge. |
| 31 | S&F of supporter under PVC seat made of size 30 x 65 x 356 mm 2nd class Hardwood all as specified by Engr-in-Charge. |
| 32 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In-Charge. |
| 33 | Repairs to Chair dining offrs (FD/MAP/II/04) |
| 34 | Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:- |
| 35 | Rear leg made of size 35x50x 950 mm IInd class Hard wood |
| 36 | Front leg made of size 35 x 50 x 450 mm IInd class Hard wood |
| 37 | Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood |
| 38 | S&F of PVC Shoe |
| 39 | Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 450x450x75mm thick |
| 40 | Removing of old existing cushion's and replacing with new cushions of size 450x450x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified. |
| 41 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In-Charge. |
| 42 | Repairs to PEG TABLE (FD-277, FD-384) |
| 43 | Removing the following existing U/s components of table Peg and providing new components of size and shape shown in drg and polishing all exposed surface of item after repairs / replacement of part:- |
| 44 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 45 | Legs made of IInd class Hard wood |
| 46 | S&F new GI 'L' shaped bracket of size 25mm x 25mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 47 | Repairs to Chair Easy (FD-229 ,201,17) |
| 48 | Removing the following U/S components chair easy and providing new components of size and shape shown in Drg and Polishing all exposed parts of chair easy after repairs / replacement of Parts.:- |
| 49 | Rear leg made out of 50 x25 x 890mm size IInd class Hard wood. |
| 50 | Front leg made of size 50x25 x 545 mm IInd class Hard wood. |
| 51 | Batten rail under seat frame made out of 50 x 25 mm IInd class Hard wood |
| 52 | Hand rest / arm rest made out of 610x65x25 mm IInd class Hard wood all as specified |
| 53 | Repairs to Table centre (size 900x450mm ) (FD-274) |
| 54 | Removing the following existing U/S components of Table centre and providing new components of size and shape shown in Drg and polishing all exposed parts of Table centre after repairs / replacement of parts . |
| 55 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 56 | Legs made of IInd class Hard wood |
| 57 | Top battern stiffener short made of IInd class Hard wood |
| 58 | Top batten stiffener long made of IInd class Hard wood |
| 59 | Repairs to chair writing: (FD - 280) |
| 60 | Removing the following unserviceable components of chair writing and providing new components of size and shape shown in Drg and polishing all exposed parts of chair writing after repairs / replacement of Parts.:- |
| 61 | Rear leg made of IInd class Hard wood of size 890x55x30mm |
| 62 | Front leg made of IInd class Hard wood of size 675x55x30mm |
| 63 | Stiffener made of IInd class Hardwood of size 535x65x30mm |
| 64 | Arm rest made of IInd class Hardwood of size 500x60x25mm |
| 65 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In_Charge. |
| 66 | Repairs to table writing,: (FD - 275, 249) |
| 67 | S & F of following u/s components and polishing after repairs :- |
| 68 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 69 | Removing u/s legs , supply and fix new legs of 1st class Hard wood as per existing pattern |
| 70 | Removing u/s drawer and replacing with new drawer made with 12 mm plywood BWR Gde as per existing pattern |
| 71 | Replacement of doors with 18 mm pre -laminated board on one side nature Teak face of Make ACTION TESA with 4 mm thick teak wood beading and piano hinges screwed and new knob all as shown in drg |
| 72 | Dismantling the old unserviceable lock and S&F new brass lock 6 lever make: Harison/Godrej as the existing one, complete all as specified and shown on drawing. |
| 73 | Removing the u/s Telescopic Channel & S&F new Telescopic Channel duly powder coated and 1.6mm thick |
| 74 | Removing the u/s knob & S&F new knobs of aluminium anodized dark brown in shade as per existing one, complete all as specified and shown on drawing. |
| 75 | Repairs to table dining 6/8 persons: (FD - 239,273,376, 165) |
| 76 | Removing the US table top supply and fix new top of size 1500x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE duly provided with 4 mm thick teak wood edging all around |
| 77 | Removing the US table top supply and fix new top of size 1800x900mm of 18 mm thick pre laminated particle board top one side natural Teak face duly of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE provided with 4 mm thick teak wood edging all around |
| 78 | Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood) |
| 79 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 80 | Repairs to table dining 4 persons: (FD/MAP-II/03) |
| 81 | Removing the US table top supply and fix new top of size 1200x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE duly provided with 4 mm thick teak wood edging all around |
| 82 | Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood) |
| 83 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 84 | Repairs to TABLE DRESSING GENTS (FD/E6/MAP/16) |
| 85 | M&L after removing the existing U/s parts from Table dressing Gents, repairing including S&F new parts of Table dressing gents and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing gents with one coat of spirit polish after preparation of surface |
| 86 | Mirror shall be of 5.5 mm thick, Backed by 12mm thick BWR Gde plywood as per IS:303, coved by decoraive mould. |
| 87 | Removing broken /UNSV glass shelves and S&F new Glass shelves of 8mm thick all as per drg |
| 88 | Removing broken / UNSV Glass Holder and S&F new Glass Holder all as specified and shown in Drg. |
| 89 | Removing broken / UNSV Magnet Catch and S&F new Magnet Catch all as specified and shown in Drg. |
| 90 | Upholstering of Sofa Set Five Seater/Sofa Chairs: (FD-281, 373,258) |
| 91 | Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 560x520x100mm thick |
| 92 | Replacement of old cushions of Sofa Set Five Seater/Sofa Chairs with newones: (FD-281, 373,258) |
| 93 | Removing of old existing cushion's and replacing with new cushions of size 560 x 520x100mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified. |
| 94 | HAT STAND WITH MIRROR. (FD-233) |
| 95 | Looking Mirror : M&L for removal of old unserviceable mirror and S&F Looking mirror of size 460x300mmx5mm of approved quality make Modi/ATUL duly fixed in the wooden frame made of teak wood and 6mm thick commercial ply wood finished with french polish of glossy shining to be provided shape and size all as specified by Engr-in-Charge. |
| 96 | Dismantling the old unserviceable Aluminum pegs and S&F new Aluminum pegs to shape and size as the existing one, complete all as specified and shown own drawing. |
| 97 | Dismantling the old UNSV wooden frame S&F new wooden frame made of teak wood shape and size all as specified by Engr-in-Charge |
| 98 | POLISHING TO WOODEN FURNITURE |
| 99 | (i) Material and Labour for scrapping the existing polished surface with proper/suitable sand paper, filling up the crevices and holes with proper wax to make surface even and smooth, preparation of surface and applying One coat of french polish to the following items complete all as specified and as directed.(ii) Work will be executed in BSO's store accn as well as where the furniture exists in different user unit in OTM/Md Accn of Navy at Porbandar under the jurisdiction of GE Navy Porbandar |
| 100 | Material and Labour for french polishing one or more coats on surfaces of any description, surfaces over 10cm width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and as directed by Engineer - in - Charge. |
| 101 | Chair dining Offrs (FD/E6/MAP/10(R) |
| 102 | Chair easy (FD - 17(M), 229) |
| 103 | Chair dining (FD – 16,228,279) |
| 104 | Chair writing (FD - 20(M), 280) |
| 105 | Peg table (FD - 25(M), 236,384) |
| 106 | Table dining 6 persons (FD - 376, FD - 273) |
| 107 | Table dining 4 persons (FD/MAP-II/03) |
| 108 | Table writing (FD-33(M), 249, 275) |
| 109 | Table 3'x2' w/o drawer (FD-42(M),FD-284) |
| 110 | Table 3'x2' with drawer (FD-41(M), FD-283) |
| 111 | Teapoy (FD - 278, 232) |
| 112 | Table centre (FD - 29(M), 274) |
| 113 | Sofa set 5 seater (FD - 373,281, 258) |
| 114 | Repairs to Table Computer (TP, FD/E6/MAP/03) |
| 115 | M& L removal of unserviceable top of table in any position & S & F new table top PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade , lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 116 | Removing vertical of table computer and S & F 650mm 150mm with 18mm thick pre-laminated particle board alongwith 4 mm teak wood beading duly polished as per drg. |
| 117 | Removing U/S Key Board tray including telescopic channel and S& F new key board tray with telescopic channel as per drg. |
| 118 | Removing U/S drawer including telescopic channel and S& F new drawer with telescopic channel as per drg. |
| 119 | Removing U/S telescopic channel and S& F new telescopic channel as per drg. |
| 120 | Removing U/S Rectangular PVC Cover and S&F new 25 x 50 mm Rect PVC Cover as per drg and specified by Engr-in-Charge. |
| 121 | Removing U/S legs with nylon buffers and S&F new legs with nylon buffers as per drg and specified by Engr-in-Charge. |
| 122 | Re-caning of Wooden Chairs (FD-75 (M), 229, 244, 250, 250, 252, 279, 280) |
| 123 | Re Canning of chairs except chair verandah. Taking down existing u/s old cane from chairs and other furniture like stool dressing, bin soiled linen etc. Cleaning to cane holes, Supply and fix new plastic cane of 2 mm wide, 0.5mm thick, 1/2 round, approved quality \\"GODREJ PATTERN\\" using minimum weight of cane mentioned in drg including removal of existing polishing from the wooden surface and repolishing with french polish 4 mm wide 1/2 round cane to be used as border all around all as shown in drg (Make Maharastra plastic industris or equivalent) (FD-280, 279, 229, 75(M), 244, 250, 252) Please Enable Macros to View BoQ information |
