|
| 1 | M&L for Painting line, dashes arrows on Apron, Dispersal or taxiway etc. including necessary preparation n.exc 30 cm wide with EPIDEC Epoxy paint marking in white/orange/yellow colour over primer. All as per manufacturer instructions and as directed by Engineer-in-Charge. |
| 2 | M&L Making good pot holes in existing cement concrete pavements by cutting out portion around the pot holes with mechanical equipment into regular shape of any size 20 to 25mm deep, removing the loose material to a distance exc 250m but n exc 1 Km and cleaning the cut out portion with compressed air to remove all foreign materials like dust, dirt, aggregates etc., priming the proposed pot holes with epoxy resin primer and filling with epoxy resin mortar in repair all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for Treatment of floor cracks in existing cement concrete pavements by cutting out portion along the cracks with mechanical equipment into 'V' shape of 25mm deep, removing the loose material to a distance exc 250m but n exc 1 Km and cleaning the cut out portion with compressed air to remove all foreign materials like dust, dirt, aggregates etc., priming the proposed pot holes with epoxy resin primer and filling with epoxy resin mortar in repair all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for forming 20mm thick expansion joint (grade'B') filled with HD 100 filler applying bond breaker tape on top of filler board for complete width of joint, provn of closed cell polyethylene back up rod 25mm dia, filled with polyethylene sealant (min depth of sealant above back up rod shall be 12mm) complying with BS-5212, priming the sides and applying masking tape after sealant applied,for thickness of concrete slab 300mm complete all as specified and as shown on drawing. |
| 5 | M&L forming construction Joints (grade 'B') 30mm deep and 10mm wide,(using diamond cutter)and sealed with polyethylne sealant complying with BS-5212 and priming the sides,provn of closed cell polyethylene line back up rod 12mm dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces and to give a neat finish to the sealant applied complete all as specified and directed by Engr-in-Charge |
| 6 | M&L forming contraction Joints (dummy joints) (Grade 'B') 65mm deep and 10mm wide,(using diamondcutter)and sealed with polyethylne sealant complying with BS-5212 and priming the sides,provn of closed cell polyethylene line back up rod 12mm dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces and to give a neat finish to the sealant applied complete all as specified and directed by Engr-in-Charge |
| 7 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 8 | M&L for Cement concrete work in pavement / hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 200 mm complete all as specified and as directed. |
| 9 | Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete including removing debries ouside MD land all as specified and directed. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, compound wall etc.laid dry beded in any mortor complete all as specified. |
| 11 | M&L for 75 mm thick cement concrete type D-2 (1:4:8) mix using 40 mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-charge. |
| 12 | M&L for Sand filling under paver blocks for cushion Complete all as specified and directed. |
| 13 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, finished with grey cement and pigment, complete all as directed. |
| 14 | All as per above Except Interlocking tiles including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge ( Note :- Sand and PCC shall be paid and measured Separtely ) |
| 15 | M & L for one coats of synthetic enamel paint after preparation of existing (red and white) surfaces of any description, over 10cm in width or girth,all inclusive of labour,scaffolding, T&P and sundries etcall as specified & directed. |
| 16 | Dismantling plain or corrugated steel sheeting or polycarbonate sheet, any gauge, thickness, in roof covering, cladding complete all as specified and directed. |
| 17 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Complete all as specified and directed. |
| 18 | M&L for Cleaning the hanger doors movment system including rollers, guide wheels, shaft and rails, rails (64 Rm) wheels (128 No's) channel 64 Rm, cleaning all dirt, rust, grease with WD 40 or Zorric and Greasing with lithium grease and oiling for smooth fuctioning complete all as specified and directed. Please Enable Macros to View BoQ information |
