|
| 1 | REPAIRS TO TABLE OFFICE CLERK STEEL: (FD-84(M), FD - 1004) |
| 2 | M& L removal of unserviceable top of table in any position & S & F new table top PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade , lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 3 | Removing the u/s drawers / shelves and re fixing duly welded by providing new MS sheet 20 gauge |
| 4 | Welding the frame by providing new MS conduit pipe 25 x 25 mm square 16 gauge wherever necessary |
| 5 | Removing the u/s locks of table supply and fix new lock for drawer with duplicate keys as per existing pattern Godrej/Harrison/Link make |
| 6 | Removing old u/s hard rubber toes and supply and fix new hard rubber toes best quality. |
| 7 | REPAIRS TO CHARPOY WITH HARD TOP (DRG NO FD/MAP-II/01) |
| 8 | Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded commercial plywood all as shown on drawing and as directed. |
| 9 | Welding to broken joints of Charpoy complete all as directed . |
| 10 | S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown on drg. |
| 11 | REPAIRS TO ALMIRAH LARGE STEEL FULLY SHELVES AND ALMIRAH LARGE STEEL (1/2 H, 1/2 S) (FD-67(M), FD-1031, FD/E6/MAP/18) |
| 12 | Removing worn out legs and S&F new legs made out of 20 gauge MS sheet as per exsting pattern all as specified and directed. |
| 13 | Removing of unsv shelves and S & F new shelves made out of 20 guage MS sheet as per exsting pattern all as specified and directed. |
| 14 | Removing existing broken MS bracket and S&F New MS bracket for fixing shelves as per existing pattern |
| 15 | Removing the U/S locks and S&F new locks with duplicate key ISI marked Make : Godrej |
| 16 | Removing the UNSV broken handle from almirah and S&F new handle to shutter made up of steel chromium plated all as shown in drg and specified |
| 17 | Removing the U/S broken locking device from almirah large steel and S&F new locking device all as specified and shown in Drg |
| 18 | REPAIRS TO ALMIRAH MED STEEL (FD-67(M), FD-1032) |
| 19 | Removing existing brackets and S&F new bracket for fixing shelves as per existing |
| 20 | Removing worn out legs and S&F new legs made out of 20 gauge MS sheet |
| 21 | Removing worn out shelves and S&F new shelf made out of 20 guage MS Sheet as per existing pattern as shown in drg. |
| 22 | Removing the U/S locks and S&F new locks with duplicate key ISI marked Make : Godrej |
| 23 | Removing the UNSV broken handle from almirah and S&F new handle to shutter. New handle shall be of steel chromium plated shown on drg. Make Sunbeam, best quality as approved by GE |
| 24 | REPAIRS TO LOCKER BEDSIDE STEEL (FD-1029) |
| 25 | Removing existing U/S socket of CP rod and S&F new socket for Hanging rod 20 mm |
| 26 | Removing U/S hasp & staple and S&F new haps & staple of 75 mm x 40 mm x 3 mm, all as specified and shown in drg. |
| 27 | Removing unserviceable CP handle and S&F new CP handle 100 mm long for locker steel all as specified and shown in drg |
| 28 | Removing worn out 75 mm long butt hinges and S&F new hinges CP duly rivetted with screws |
| 29 | Removing U/S legs and S&F new leg of U shape channel 100 mm height & 60 mm wide ends plugged with 1 mm thick mild steel sheet, duly welded at both |
| 30 | Removing U/S CP pipe and S&F 20 mm dia CP steel conduct pipe of 1.6 mm thickness |
| 31 | Repairs to Bed Hard 6' x 3' (FD/E6/MAP/8R) |
| 32 | Dismantling of old and unserviceable plywood top from Bed Hard and S&F of new ply top of 12 mm plywood commerical (BWR) make Archid/Duro/Century, all as per size and design shown on drawing and as per existing Bed Hard. |
| 33 | Removing of old and unserviceable head board from Bed Hard S&F of new head Board on Bed Hard. Head board shall be made out of prfelaminated particle board 18 mm thick one side teak finished. Make Novapan/Bhutan teak wood beadidng 4 mm thick all around. All as per size and design shown on drawing and as per existing Beds. |
| 34 | Removing of old and unserviceable foot board from Bed Hard S&F of new foot Board on Bed Hard. Foot board shall be made out of prfelaminated particle board 18 mm thick one side teak finished. Make Novapan/Bhutan teak wood beadidng 4 mm thick all around. All as per size and design shown on drawing and as per existing Beds. |
| 35 | S&F PVC Shoe |
| 36 | REPAIRS TO Charpoy Folding IP with Hard Top (FD-388 ®) |
| 37 | M&L for removal of old existing unsv plywood, S&F 8 mm thick commercial plywood ISI marked, BWR Grade (Make Archid/ Century/Duro) in two pieces fixed with suitable screw steel all as specified and derected |
| 38 | S&F PVC Shoe |
| 39 | REPAIRS TO CHAIR VERANDAH ( FD- FD/MAP_II/15) |
| 40 | Removing u/s , broken seat and back from chair verandah. S&F of new PVC seat and back of 4mm thick made out PVC the grooves of size shown in drg. |
| 41 | Removing of worn out legs of chair verandah of existing size 19mm MS pipe 18 gauge duly welded as per existing size on drg and directed. |
| 42 | Removing of unserviceable PVC shoe of chair verandah S& F with new PVC shoes as per existing size on drg and as directed. |
| 43 | S&F new MS angle supporter under PVC seat made of size 3 x 25 x 420 mm as specified by Engr-in-charge |
| 44 | Repairs to Chair Writing MAP (FD-FD/E6/MAP/12) |
| 45 | Removing of existing unserviceable seat ply including cushion foam and tapestry of chair writing MAP S&F with new seat ply including cushion foam and tapestry as shown in drg. |
| 46 | Removing of existing unserviceable Back ply including cushion foam and tapestry of chair writing MAP S&F with new Back ply including cushion foam and tapestry as shown in drg. |
| 47 | Removing of existing unserviceable handle of chair wittting MAP S&F with new handle as shown in drg. |
| 48 | S&F PVC Shoe |
| 49 | Welding the frame by providing new MS tubular frame 25 x 10 mm 16 gauge wherever necessary |
| 50 | REPAIRS TO CHAIR REVOLVING OF ANY TYPE (TP) |
| 51 | Removing the old seat upholstery of chair revolving & Supplying and fixing new cushion of 75mm thick, 'U' Foam of make \\"SLEEP WELL\\" with cloth cover of approved quality and colour to match all as per existing complete all as specified and as directed. |
| 52 | Removing the unserviceable caster wheel & Supplying and fixing new caster wheel as per existing complete all as specified and as directed. |
| 53 | Removing unserviceable bottom & Supplying and fixing bottom as per existing complete all as specified and as directed . |
| 54 | Removing unserviceable hydraulic gas pump and S&F new hydraulic gas pump as per drg. |
| 55 | Removing unserviceable handle and S& F new handle as per drg. |
| 56 | REPAIR TO RACK SHOE STEEL (FD/E6/MAP/02R) |
| 57 | Removing UNSV Jali framework and S&F new Jali framework made of 3 mm dia MS Rod welded to Main Frame as per drg and specified by Engr-in-charge. |
| 58 | Removing UNSV Main Frame and S&F new Main Frame made of 19mm dia MS Pipe of 18 gauge welded to legs as per drg and specified by Engr-in-charge. |
| 59 | Removing of worn out legs of Rack Shoe Steel of existing size 25 mm MS pipe 18 gauge duly welded as per existing size on drg and directed. |
| 60 | S&F PVC Shoe |
| 61 | PAINTING TO STEEL FURNITURE |
| 62 | (i) Preparation of old surfaces of steel furniture with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of colour as per existing both inside and outside complete all as specified and as directed to the following items:(ii) Work will be executed in BSO's store accn as well as where the furniture exists in different user unit in OTM/Md Accn of Navy at Porbandar under the jurisdiction of GE Navy Porbandar |
| 63 | Almirah large steel with shelves (FD - 67(M)FD - 1031) |
| 64 | Almirah medium with shelves (FD - 67(M)FD - 1032) |
| 65 | Almirah Large steel 1/2 H, 1/2 S (FD/E6/MAP/18) |
| 66 | Book Case Steel (FD - 90(M)) |
| 67 | Book shelf open large steel (FD - 69(M)) |
| 68 | Locker Steel Movable (FD - 1029) |
| 69 | Side Rack 3 spaces Steel (FD- 7(M),1023) |
| 70 | Table office clerk steel (FD - 84(M)FD - 1004) |
| 71 | Table office officer steel (FD-84, 1003) |
| 72 | Charpoy Folding IP with hard Top (FD-388 ®) |
| 73 | Chair Varandah (FD/E6/MAP) |
| 74 | Re-caning of Chair Verandah (FD-256 & FD-359) |
| 75 | Taking down unserviceable plastic cane or nylon newar from chair verandah by supply and fix new plastic cane of 4 mm wide 0.5 mm thick white colour half round. Weaving shall be matt pattern and cane shall be Maharashtra plastic, Industries or Equivalent Matt pattern complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
