|
| 1 | Ground Floor |
| 2 | Earth work in excavation of foundation in all kind of soil or gravelly soil including dressing and levelling the bed and disposal of the excavated materials within initial leads and lifts as per direction of the Engineer-in-charge. |
| 3 | Filling in foundation and Grade beam with sand well watered and rammed with cost, conveyance, royality, taxes of all materials and all labour, T&P, etc. complete |
| 4 | Providing cement concrete (1:3:6) using 40mm size H.G. Crusher Broken metal of approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royality, cost of all labour, T&P etc. complete as per direction of E.I.C. |
| 5 | Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite chips (20 mm. size chips not to exceeds 25 % ) and screened and washed sharp sand for mortar of approved quality from approved quarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debrises from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as directed by the Engineer in charge. |
| 6 | Foundation and footing |
| 7 | Column from GL to 1st |
| 8 | Plinth beam |
| 9 | Lintel |
| 10 | Roof Slab |
| 11 | Stair case |
| 12 | Chajja |
| 13 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) |
| 14 | Brick work with Fly Ash Bricks having crushing strength 75 kg/sq.cm in c.m. 1:6 in F & P including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 15 | Brick work with Fly Ash .Bricks having crushing strength between 100kg/sq.cm to 149kg/sq.cm in c.m. 1:6 in Sup.Str. including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 16 | 12mm thick cement plaster (1:6) to outside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 17 | 16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 18 | 6mm thick cement plaster (1:4) to R.C.C. Surface finished smooth including closed deep chipping and slurry treatment, watering, curing cost, carriage, royality and taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 19 | Wall Priming one coat with wall cement primer water bound etc. complete |
| 20 | Wall painting two coats with plastic emulsion paint of approved shade including cost of paint. |
| 21 | Wall painting two coats with weather coat paint of approved shade including cost of paint. |
| 22 | Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of confirming to I.S. 13755 with application of polymere modified set cement based water resistant adhesive confirming to I.S. 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, taxes, labour & T&P etc. required for the work etc. all complete. |
| 23 | Fixing Vitrified tiles in dados (Printed Series) skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 24 | Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 25 | Fixing industrial Chequred tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge . |
| 26 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 27 | Supplying and fixing MS Window Grill and Grill gate including cost of fabrication and cost,conveyance taxes etc. complete. (A/R page-225 /4). '@30k.g/Sqm' |
| 28 | Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. complete as per direction of Engg-in-Charge . |
| 29 | Supplying, fitting and fixing of size 125mm X 65mm of required length of FRP door frame for including Providing and fixing factory made door frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. |
| 30 | Supplying and fixing 30mm thick FRP door shutter including all hardware fittings etc complete. |
| 31 | Providing fitting fixing AIuminium door with OEL anodized AI door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member and 6mm glass fixed in top portion, bottom portion fixed 12mm novapan board etc. complete (Revised A/R |
| 32 | First Floor |
| 33 | Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite chips (20 mm. size chips not to exceeds 25 % ) and screened and washed sharp sand for mortar of approved quality from approved quarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debrises from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as directed by the Engineer in charge. |
| 34 | Column |
| 35 | Lintel Beam |
| 36 | Roof Slab |
| 37 | ST Slab |
| 38 | Chajja |
| 39 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) |
| 40 | Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Superstructure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete. |
| 41 | 12mm thick cement plaster (1:6) to outside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 42 | 16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 43 | 6mm thick cement plaster (1:4) to R.C.C. Surface finished smooth including closed deep chipping and slurry treatment, watering, curing cost, carriage, royality and taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 44 | Wall Priming one coat with wall cement primer water bound etc. complete |
| 45 | Wall painting two coats with plastic emulsion paint of approved shade including cost of paint |
| 46 | Wall painting two coats with weather coat paint of approved shade including cost of paint. |
| 47 | Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of confirming to I.S. 13755 with application of polymere modified set cement based water resistant adhesive confirming to I.S. 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, taxes, labour & T&P etc. required for the work etc. all complete. |
| 48 | Fixing Vitrified tiles in dados (Printed Series) skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 49 | Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 50 | Supplying, fitting and fixing of Granite tile (20mm thick) on flooring over 25mm CM (1:1) including cost of all materials and cost of all labour required for the work etc. all complete. |
| 51 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 52 | Supplying and fixing MS Window Grill and Grill gate including cost of fabrication and cost,conveyance taxes etc. complete. (A/R page-225 /4). '@30k.g/Sqm' |
| 53 | Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. complete as per direction of Engg-in-Charge . |
| 54 | Supplying and fixing 30mm thick FRP door shutter including all hardware fittings etc complete. |
| 55 | Supplying, fitting and fixing of size 125mm X 65mm of required length of FRP door frame for including Providing and fixing factory made door frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. |
| 56 | Providing fitting fixing AIuminium door with OEL anodized AI door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member and 6mm glass fixed in top portion, bottom portion fixed 12mm novapan board etc. complete |
| 57 | 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard granite chips on new work including providing chicken mesh. |
| 58 | Head Room |
| 59 | Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite chips (20 mm. size chips not to exceeds 25 % ) and screened and washed sharp sand for mortar of approved quality from approved quarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debrises from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as directed by the Engineer in charge. |
| 60 | Column |
| 61 | Roof Slab |
| 62 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) |
| 63 | Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Super structure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete. |
| 64 | 16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 65 | 12mm thick cement plaster (1:6) to outside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 66 | 6mm thick cement plaster (1:4) to R.C.C. Surface finished smooth including closed deep chipping and slurry treatment, watering, curing cost, carriage, royality and taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 67 | Wall Priming one coat with wall cement primer water bound etc. complete |
| 68 | Wall painting two coats with plastic emulsion paint of approved shade including cost of paint |
| 69 | Wall painting two coats with weather coat paint of approved shade including cost of paint. |
| 70 | Supplying and fixing MS Shutter frame door including cost of fabrication and cost,conveyance taxes etc. complete. (A/R page-225 /4). '@30k.g/Sqm\\" |
| 71 | Construction of Septic Tank and Soak Pit |
| 72 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge |
| 73 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 74 | C.C.(1:4:8) with 20 mm. size h.g. metal in F&P. |
| 75 | C.C.(1:2:4) with 12 mm. size h.g.chips |
| 76 | Providing HYSD bars for reinforcement |
| 77 | Brick work with Fly AshBrick having crushing strength not less than 75 kg/cm2 in cement mortar (1:4) in F& P |
| 78 | Honey comb masonary work with Fly AshBrick having crushing strength of 75 kg/cm2 in cement mortar 1:4and plastering in 1:6 |
| 79 | Filling of brick khoa |
| 80 | 16mm plastering in 1:6 cm |
| 81 | Providing and fixing of man hole of cast iron of 0.6m dia including fixing with cement mix prpoely with all TC materials complete |
| 82 | PH System |
| 83 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/2000 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. |
| 84 | 25mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.) |
| 85 | Fixation of J Hook in walls |
| 86 | 25mm dia UPVC ASTM Ball Valve |
| 87 | 110 mm Rigid UPVC Pipe (IS:4985-200) For Latrine Gash Pipe |
| 88 | 110mm Vent Cowl (Top of Gash Pipe) |
| 89 | Cost & Fitting Charges of 3 layer White Rotational Module Cylindrical Water Storage Tank (ISI Mark) (1000 lit.) (CDAO Room) |
| 90 | Internal water supply work : |
| 91 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 92 | Cutting holes through existing brickwork including making good the damages in cement mortar (1:4) |
| 93 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/2004,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete.[in ground floor][data for 10 mtr.][3.1.3/313] |
| 94 | 15mm.dia PVC pipe [ASTM-D-1785/2004,Sch-80.]:-(per mtr.) |
| 95 | 20mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.) |
| 96 | Supplying, fitting & fixing the following PH fittings and fixtures of standard make & quality as per PH specification. |
| 97 | Supplying fitting of all materials i.e (EWC With S-Trap including 10 lit.Cystern, Cover & Jet Spray) labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. |
| 98 | Supplying fitting of all materials i.e (Orissa pan 23'' including 10 lit.Cystern, foot rest & Hand Spray) labour and T&P for fixing Orissa pan 23'' on the floor with 1:3: 6 & Cystern & Hand Spray with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. |
| 99 | Supplying all materials, & fixing glazed earthen-ware squatting urinal (ladies) plate of size (600x355mm.) including Procelain foot rest for IWC (02 No.) and Urinal waste Coupling ,with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:3:6) using 12mm. size h.b.g. chips all complete as per specification.[3.3.9./340] |
| 100 | Supplying of all materials,labour and T&P for fixing of Proclean Flat back stall Type magnum urinal (Big) including the urinal PVC waste pipe 50 mm x800 mm, Urinal waste Coupling & Procelain Urinal Spreader (Angular Tape) by means of white lead mixed with chopped hemp etc. all complete as per specification.[3.3.8./339 ] |
| 101 | Supplying & Fitting, Fixing of Corner Wash Basin( 16''x 16\\") including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing),15mm.dia SHORT Body Bib Cock Fancy With Flange & CP Flange with all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.12./344] (including cost of wash hand basin and all accessories. ) |
| 102 | Supplying & Fitting, Fixing of Pedestal Wash Basin 22\\"x 16\\" including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing),15mm.dia SHORT Body Bib Cock Fancy With Flange & CP Flange with all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.12./344] (including cost of wash hand basin and all accessories. ) |
| 103 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. (CP Towel Rail (600x20) mm) |
| 104 | Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. |
| 105 | Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification.[3.3.29./359] or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification. |
| 106 | Providing and fixing of 15 mm CP 2 in 1 Bib Cock [including cost] |
| 107 | Providing and fixing of 15 mm CP 2 way Bib Cock [including cost] |
| 108 | Providing and fixing of 15mm.dia C.P Long Body Bib Cock [including cost] |
| 109 | 15mm dia CP Extension Piece 2\\" |
| 110 | 5\\" C.P. Grating |
| 111 | CP Flange |
| 112 | Supplying all materials,labour and T&P for fixing of Mirror (600 x 600)mm bevelled edge mirror of superior glass -wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification.[3.3.26./357] |
| 113 | Fitting & fixing of 15 mm CP revolving Shower bend type arm 600x25x25mm square / Round shape with wall mounted showers including fittings of flange, 15mm.dia.C.P. stop cock, CP Gratting |
| 114 | Providing and fixing on wall face unplasticised 110mm dia OD PVC SWR S/S Pipe (ISI) (Rain Water Pipe)waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 115 | 110 mm dia PVC SWR Plain Bend 45'( for Rain Water Pipe) |
| 116 | 110mm dia PVC SWR Door Bend 87.5' |
| 117 | 110mm dia PVC SWR Plain Bend |
| 118 | 110 mm dia SWR PVC P Trap |
| 119 | 110mm dia PVC SWR Gully Trap |
| 120 | 110mm door Cross Tee |
| 121 | 110mm dia PVC SWR pipe clip |
| 122 | 75mm dia Plain Bend |
| 123 | 75mm dia PVC Door Bend (87.5') |
| 124 | 125mm x 75mmSWR off set BEND |
| 125 | 110 mm Door Bend |
| 126 | Electrification |
| 127 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 128 | Group A |
| 129 | Group B |
| 130 | Group C |
| 131 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION) |
| 132 | Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp modular plug with switch with all conection. on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION) |
| 133 | Supply& fixing of Modular type 6 Amp one way switch and 6 A socket outlet with metal box and modular cover Separate Board on surface or recess including all conection as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)) |
| 134 | Submains:Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. |
| 135 | 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. |
| 136 | 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. |
| 137 | 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. |
| 138 | 4 x 6.0 sq.mm. + 2 x 4 sq.mm. |
| 139 | Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/ BEC/ Precision/ Norpak |
| 140 | 20 MM |
| 141 | 25 MM |
| 142 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. |
| 143 | 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years |
| 144 | Supplying and fixing 63 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years.. |
| 145 | Supplying and fixing 25 Amps rating,C series,10KA breaking capacity, DP, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years. |
| 146 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years. |
| 147 | Fittings & Fixtures |
| 148 | Supply of 15 watt recessed mounted indoor type Round/square LED Luminaire with LED GLARE FREE opal diffuser , IP20 Efficency 120-130lm/w Lamp complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. |
| 149 | Supply of 18 watt Surface mounted indoor type Round/square LED Luminaire with LED GLARE FREE opal diffuser , IP20 Efficency 120-130lm/w Lamp complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge |
| 150 | Supply of 36 watt recessed mounted 2'' x2'' indoor type square LED Luminaire with LED GLARE FREE opal diffuser , IP20 Efficency 120-130lm/w Lamp complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. |
| 151 | Supply ,Installation and testing of Surface mounted indoor type 18 WATT LED T 5 FITTINGS & Functioning as per Product TDS complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: PANASONIC/PHILIPS/HALONIX/CROMPTON/WIPRO/HAVELLS/LT |
| 152 | Supply delivery, installation, testing & commissioning of following types of 60 WATT LED STREET LIGHT with aluminium pipe housing with CCT:3000K IP66 Height -600 MM mp complete etc.as required and as per the direction of E.I.C. MAKE: PANASONIC/ PHILIPS/ HALONIX/ CROMPTON/ WIPRO/ HAVELLS/ LT |
| 153 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA (Model.Turbo HDEF 1400 RPM ISI)/Eq. model of /Havells/ ALmonrad/ Crompton |
| 154 | S/F of 48\\" Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-CromptonModel-Jura, Polycab Model-Vital, Polar Model-Winpro) etc. |
| 155 | Supplying and fixing of Stepped type modular fan regulator on existing switch box / cover including connections etc as required. |
| 156 | Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years |
| 157 | Extra for using salt and charcoal for G.I or copper plate earth as required |
| 158 | Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required. |
| 159 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 160 | Supplying of following Materials. |
| 161 | Supply installation of 33kV 3mm thick Class-C Rubber Mat as per IS-15652 and complete as per direction of Eng-in-charge.(Size-10mx1m) |
| 162 | Danger Board. |
| 163 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.. |
| 164 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. Please Enable Macros to View BoQ information |
