Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CONSERVATION OF MAHARISHI SANDIPANI ASHRAM AT UJJAIN |
| 2 | Civil Work, Conservation of work, Sewage Treatment Plant (STP 500 KLD), Solar Plant (100 KWP), Services |
| 3 | Installations in Brass |
| 4 | 108 ft height Tall InstallationDesigning, sculpting, engineering, fabrication, supply, transportation and installation of a 108 ft high statue of Lord Krishna in architectural-grade metal, as per approved design, including 3D modelling and scaled physical miniatures (minimum 4 ft and 8 ft) for approvals. The scope includes complete structural design and analysis (internal framework and cladding) vetted from a reputed/approved institution, along with preparation of fabrication drawings. The statue shall comprise segmented metal panels of suitable thickness (indicatively 6–12 mm or as per design), in bronze or equivalent approved alloy, with required sculptural detailing, finishing and joint treatment. The work includes fabrication and erection of internal structural steel framework conforming to relevant IS standards, with corrosion protection, approved surface finish/patina, factory fabrication and trial assembly (as required), transportation and complete on-site erection including alignment, fixing and finishing. The item also includes lightning protection, earthing, testing, inspection and submission of as-built drawings and structural stability certificates.The rate shall be inclusive of all materials, labour, tools & plants, machinery, design, approvals, transportation (including specialised logistics, if any), safety measures, taxes, duties and all incidental works required to complete the work in all respects as per approved design and directions of the Engineer-in-Charge. |
| 5 | 40 ft height Tall InstallationProviding, fabricating, supplying, transporting and installing a 40 ft high statue of Lord Krishna (with flute) in architectural-grade metal, as per approved design, including 3D modelling and preparation of detailed fabrication drawings. The scope includes complete structural design and analysis of the statue system (internal framework and cladding), vetted from a reputed/approved institution. The statue shall comprise segmented metal panels of suitable thickness (indicatively 6–12 mm or as per design requirements), using bronze or equivalent approved alloy, with complete sculptural detailing, finishing and joint treatment to achieve the desired aesthetics and durability. The work includes fabrication and erection of an internal structural steel framework conforming to relevant IS standards, with adequate corrosion protection system and approved surface finish/patina. The item also includes factory fabrication and trial assembly (as required), safe packing, transportation, and complete on-site erection including alignment, fixing, joint sealing and final finishing. Provision of lightning protection, earthing, testing, inspection, and submission of as-built drawings and structural stability certificates are included. The rate shall be inclusive of all materials, labour, tools & plants, machinery, design, approvals, transportation, safety measures, taxes, duties and all incidental works required to complete the work in all respects as per approved design and directions of the Engineer-in-Charge. |
| 6 | 20ft height Tall InstallationProviding, fabricating, supplying, transporting and installing a 20 ft high statue of Lord Krishna (with Sudarshana Chakra) in architectural-grade metal, as per approved design, including 3D modelling and preparation of detailed fabrication drawings. The scope includes complete structural design and analysis of the statue system (internal framework and cladding), vetted from a reputed/approved institution. The statue shall comprise segmented metal panels of suitable thickness (indicatively 6–12 mm or as per design requirements), using bronze or equivalent approved alloy, with complete sculptural detailing, finishing and joint treatment to achieve the desired aesthetics and durability. The work includes fabrication and erection of an internal structural steel framework conforming to relevant IS standards, with adequate corrosion protection system and approved surface finish/patina. The item also includes factory fabrication and trial assembly (as required), safe packing, transportation, and complete on-site erection including alignment, fixing, joint sealing and final finishing. Provision of lightning protection, earthing, testing, inspection, and submission of as-built drawings and structural stability certificates are included. The rate shall be inclusive of all materials, labour, tools & plants, machinery, design, approvals, transportation, safety measures, taxes, duties and all incidental works required to complete the work in all respects as per approved design and directions of the Engineer-in-Charge. |
| 7 | Installations in Stone |
| 8 | 8 ft height Tall InstallationProviding, carving, supplying and installing a 8 ft high statue of Sandipani Rishi in seated posture, executed in natural sandstone as per approved design, drawings, and artistic references. The work includes conceptual artwork development, preparation of 2D/3D sculpting models, clay/POP maquettes for approval, and detailed carving drawings indicating posture, proportions, drapery, facial expressions, and ornamentation.The statues shall be carved from single or multiple blocks of high-quality natural sandstone (as specified—Dholpur / Jaisalmer / Agra / Bansi Paharpur, etc.) with uniform grain, free from cracks, veins or discoloration. Minimum block thickness shall be suitable to achieve full sculptural depth, ensuring structural integrity. Carving shall be executed using CNC rough-cutting followed by hand-finishing by skilled artisans, achieving accurate human proportions, anatomical correctness, facial detailing, hair/beard texture, garment folds, symbolic features, and expressions appropriate to Gurukul narrative. Student statues shall be carved to the correct scaled height matching the 8 ft Rishi statue, maintaining visual harmony and composition. Surface finishing shall include fine chiselling, smoothing, edge refinement and natural stone polish as per approved sample.The item includes fabrication and installation of a stone or RCC pedestal (height, size, and design as specified), finished in matching sandstone cladding with mouldings, corner detailing, inscriptions (if any), and proper anchoring arrangements for statues. All statues shall be installed using SS dowels, anchor bolts, epoxy grouts, and anti-vibration bedding to ensure stability and long-term performance. Work includes complete surface preparation, alignment, joint filling, sealing, and final finishing of the pedestal and sculptures.Scope also includes transportation of stone blocks and finished sculptures, loading/unloading, protective packing, scaffolding, lifting equipment, site preparation, positioning of statues, cleaning, polishing, and application of breathable stone preservative/sealant. All works shall be executed with strict adherence to artistic quality, proportional accuracy, safety, and site conditions. |
| 9 | 4 ft height Tall InstallationProviding, carving, supplying and installing a 4 ft high statue of gurukul students in seated posture, executed in natural sandstone as per approved design, drawings, and artistic references. The work includes conceptual artwork development, preparation of 2D/3D sculpting models, clay/POP maquettes for approval, and detailed carving drawings indicating posture, proportions, drapery, facial expressions, and ornamentation.The statues shall be carved from single or multiple blocks of high-quality natural sandstone (as specified—Dholpur / Jaisalmer / Agra / Bansi Paharpur, etc.) with uniform grain, free from cracks, veins or discoloration. Minimum block thickness shall be suitable to achieve full sculptural depth, ensuring structural integrity. Carving shall be executed using CNC rough-cutting followed by hand-finishing by skilled artisans, achieving accurate human proportions, anatomical correctness, facial detailing, hair/beard texture, garment folds, symbolic features, and expressions appropriate to Gurukul narrative. Student statues shall be carved to the correct scaled height matching the 8 ft Rishi statue, maintaining visual harmony and composition. Surface finishing shall include fine chiselling, smoothing, edge refinement and natural stone polish as per approved sample.Scope also includes transportation of stone blocks and finished sculptures, loading/unloading, protective packing, scaffolding, lifting equipment, site preparation, positioning of statues, cleaning, polishing, and application of breathable stone preservative/sealant. All works shall be executed with strict adherence to artistic quality, proportional accuracy, safety, and site conditions. |
| 10 | Installations in GFRC |
| 11 | 8 ft height Tall InstallationProviding, fabricating, supplying, transporting and installing a complete 8-ft tall thematic statue of “Krishna and Sudama” executed in premium-grade Glass Fibre Reinforced Concrete (GFRC), including preparation of detailed 3D sculptural model, scaling, refinement and approval, fabrication of high-resolution multi-part FRP/GFRP moulds with gel-coat inner surface and stiffened backing supports, casting of the statue using GFRC of minimum 60–70 MPa compressive strength comprising white/grey cement, silica sand, additives and alkali-resistant glass fibres (zirconia >16%) with face-coat and fibre-reinforced back-coat achieving a uniform shell thickness of 25–35 mm, forming all fine details, textures, folds and ornaments as per approved design; providing and fixing a complete internal structural framework made of MS/GI square sections (50×50×3 mm, 40×40×3 mm, and 32 mm pipes) including fabrication, welding, base plate (10–12 mm thick), bracing, anti-rust treatment and epoxy primer coating for long-term stability; assembling and jointing all GFRC parts over the internal frame using stainless steel fasteners, chemical anchors and GFRC putty to achieve seamless joints and monolithic appearance, machine sanding, hand finishing and sculptural detailing; applying exterior-grade finishing including stone/metallic texture, hand-painted detailing and two coats of UV-resistant PU protective coating; transporting the statue components to site with protective packing, providing all tools, tackles, skilled labour, scaffolding and lifting equipment, installing the statue on the RCC/MS foundation pedestal with approved anchor bolts, non-shrink grout and alignment checks, ensuring complete structural stability, verticality, final polishing, touch-ups, cleaning and making good the entire work, all complete as per design, specification and directions of the Engineer-in-Charge. |
| 12 | 8 ft height Tall InstallationProviding, fabricating, supplying, transporting and installing a complete 8-ft tall thematic statue of “Krishna and Balram” executed in premium-grade Glass Fibre Reinforced Concrete (GFRC), including preparation of detailed 3D sculptural model, scaling, refinement and approval, fabrication of high-resolution multi-part FRP/GFRP moulds with gel-coat inner surface and stiffened backing supports, casting of the statue using GFRC of minimum 60–70 MPa compressive strength comprising white/grey cement, silica sand, additives and alkali-resistant glass fibres (zirconia >16%) with face-coat and fibre-reinforced back-coat achieving a uniform shell thickness of 25–35 mm, forming all fine details, textures, folds and ornaments as per approved design; providing and fixing a complete internal structural framework made of MS/GI square sections (50×50×3 mm, 40×40×3 mm, and 32 mm pipes) including fabrication, welding, base plate (10–12 mm thick), bracing, anti-rust treatment and epoxy primer coating for long-term stability; assembling and jointing all GFRC parts over the internal frame using stainless steel fasteners, chemical anchors and GFRC putty to achieve seamless joints and monolithic appearance, machine sanding, hand finishing and sculptural detailing; applying exterior-grade finishing including stone/metallic texture, hand-painted detailing and two coats of UV-resistant PU protective coating; transporting the statue components to site with protective packing, providing all tools, tackles, skilled labour, scaffolding and lifting equipment, installing the statue on the RCC/MS foundation pedestal with approved anchor bolts, non-shrink grout and alignment checks, ensuring complete structural stability, verticality, final polishing, touch-ups, cleaning and making good the entire work, all complete as per design, specification and directions of the Engineer-in-Charge. |
| 13 | 6 ft height Tall InstallationProviding, fabricating, supplying, transporting and installing a complete 6-ft tall thematic statue of “Krishna and Yashoda maa in seating posture” executed in premium-grade Glass Fibre Reinforced Concrete (GFRC), including preparation of detailed 3D sculptural model, scaling, refinement and approval, fabrication of high-resolution multi-part FRP/GFRP moulds with gel-coat inner surface and stiffened backing supports, casting of the statue using GFRC of minimum 60–70 MPa compressive strength comprising white/grey cement, silica sand, additives and alkali-resistant glass fibres (zirconia >16%) with face-coat and fibre-reinforced back-coat achieving a uniform shell thickness of 25–35 mm, forming all fine details, textures, folds and ornaments as per approved design; providing and fixing a complete internal structural framework made of MS/GI square sections (50×50×3 mm, 40×40×3 mm, and 32 mm pipes) including fabrication, welding, base plate (10–12 mm thick), bracing, anti-rust treatment and epoxy primer coating for long-term stability; assembling and jointing all GFRC parts over the internal frame using stainless steel fasteners, chemical anchors and GFRC putty to achieve seamless joints and monolithic appearance, machine sanding, hand finishing and sculptural detailing; applying exterior-grade finishing including stone/metallic texture, hand-painted detailing and two coats of UV-resistant PU protective coating; transporting the statue components to site with protective packing, providing all tools, tackles, skilled labour, scaffolding and lifting equipment, installing the statue on the RCC/MS foundation pedestal with approved anchor bolts, non-shrink grout and alignment checks, ensuring complete structural stability, verticality, final polishing, touch-ups, cleaning and making good the entire work, all complete as per design, specification and directions of the Engineer-in-Charge. |
| 14 | Providing, fabricating, supplying, transporting and installing GFRC gates of overall size approx. 12 mt in height and 7 mt in width with a central arched opening of 3 mt clear width, executed in minimum 40 mm thick high-strength Glass Fibre Reinforced Concrete (GFRC), including preparation of detailed moulds, carving and sculpting of theme-based murals, motifs and façade ornamentation as per approved design; fabrication of high-resolution multi-part moulds with gel-coat lining and stiffened supports; casting of GFRC panels using high-grade cement matrix with alkali-resistant glass fibres (zirconia content >16%), silica sand, polymer additives and plasticizers, ensuring uniform thickness, sharp detailing and controlled curing; providing an internal SS/GI structural framework using IS-grade square hollow sections (minimum 40×40×3 mm or as required), including fabrication of frame members, stiffeners, anchor plates, welding, rust-preventive treatment and epoxy coating; assembling GFRC panels on the structural frame using stainless steel connectors, chemical anchors and GFRC putty for seamless integration of joints; surface finishing with approved texture/colour scheme, including primer, exterior-grade paint and UV-resistant PU/sealer coating; transportation to site with protective packing, lifting and erection of gate components, fixing on RCC/structural foundation with anchor bolts, grouting, alignment checks, touch-ups, cleaning and handing over the complete installation, including all labour, materials, tools, tackles and incidental works required to execute the GFRC gate in all respects as per design and engineer-in-charge. |
| 15 | Painting work |
| 16 | stone inlay work around the corrdiorProviding, preparing, carving, inlaying and finishing thematic stone inlay work on hard sandstone surfaces, depicting storyline figures, scenes and symbolic motifs related to Shri Krishna and the Sandipani Ashram narrative, including complete surface preparation, cleaning, marking and engraving of recess profiles in sandstone to a uniform depth of 30 mm for receiving the inlay stones; supplying, carving and shaping contrasting natural stones (such as dholpur, Jaisalmer, ) into required figurative forms, motifs, line-art elements and narrative patterns, executed through hand chiselling, contour shaping, sanding and fine detailing; fixing and embedding the 30 mm thick carved stone inlay pieces into the engraved sandstone recess using approved stone adhesives or lime-based mortar, ensuring flush finish, tight joints, correct alignment and seamless integration with the parent stone; carrying out edge refinement, surface chiselling, texture correction and polishing as required to achieve a unified aesthetic; followed by washing and application of approved clear breathable stone sealer or PU-based exterior protective coating to enhance colour, resist dust, protect against moisture ingress and ensure long-term durability; including all materials, tools, labour, templates, artwork preparation, scaffolding, finishing, curing and incidental works required to complete the stone inlay work in all respects as per approved design and direction of the Engineer-in-Charge. |
| 17 | Providing, commissioning and executing 3D art painting work on approved ceiling/wall surfaces through an empanelled artist/studio of national or international recognition, including concept adaptation, refinements, detailed layout, shading, rendering and creation of a three-dimensional visual effect using high-grade, UV-resistant premium paints. The scope includes complete surface preparation, application of high-quality primer, multilayer artistic painting with controlled gradients, depth detailing, highlights, shadow modulation, textural refinement, and final protective clear coat to ensure durability and colour fastness.The work shall be carried out strictly under the supervision of the selected national/international artist or their authorised team, ensuring fidelity to the approved concept and achieving museum-grade artistic quality. The item shall include all materials, specialised artistic tools, airbrush systems, scaffolding, protection of surrounding areas, mockups, sampling, transportation, artist fees, technical support team, consumables, and all labour required to deliver the artwork complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 18 | Conservation Work |
| 19 | For Stone facade cleaning - Gently cleaning the surface of the stone masonry with Water by gentle brushing with soft nylon brushes as specified. Item to include using water misting employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface, without over-wetting, followed up by gentle brushing with soft nylon brushes as specified and mild pH balanced surfactants as specified for indicated areas to remove surface dirt, grit, sulphate accretions, lime wash etc. complete. - For the items like Grooves, moulding, decorative portions, keystones, architrave plain area will be measured under this item only. This includes preparing a sample patches for the cleaning as directed by the Design Architect for their approval. |
| 20 | Water repellent treatment associated with long lasting biogrowth protection with Organosiloxane based and wide spectrum biocides mixture, ready to use product in dearomatised White Spirit, applied by brush on double coating wet on wet Note: for porous substrates consider to increase the quantity of product accordingly. Repeat coats if required. |
| 21 | External Electrical WorksCSS |
| 22 | Supply, Installation, Testing and Commissioning 11kV, 315 KVA, Outdoor Package / compact Sub- Station (in compliance IEC 62271- 202) shall beconsisting of following : |
| 23 | HT SWITCHGEAR |
| 24 | 11kV 200Amps 21kA for 3 sec. SF6 insulated Copper Busbar Non- Extensible Ring Main Unit (Type CVC) consisting of Two Nos. of remote operated motorised Load Break Switches and One No. of Fixed remotely motorised operated vacuum Circuit Breaker unit with robotically welded having IP67 in SF 6 encapsulated stainless steel enclosure of thickness minimum 2.0. with series trip, self powered microprocessor based 3 Ph numerical over current relay (IDMTL + Inst.) protection..1 no., Protection CT of ratio-25/1A 2.5VA 5P10... 3 nos, gas pressure gauge etc. It should have metering unit complete with CTs, PTs. The SCADA system should communicate all faults,and electrical parameters like voltage, current, KW, Kwar, kwh, kvarh, pf etc. |
| 25 | TRANSFORMER |
| 26 | Three Phase, 50 Hz, Core type, two winding, 315 KVA 11KV/433V DYn11 cast resin dry type, AN type transformer. The transformer be copper wound and class F insulated. The off ckt tap changer should be +5 % to 5 % in step of 2.5% each. The transformer shall be suitable for operation at full rated power on all tapings without exceeding the applicable temperature rise. It should be possible to operate the transformer satisfactorily, with the loading guide specified in IS-6600. There shall be no limitations imposed by bushings, tap changers, auxiliary equipment to meet this requirement. |
| 27 | LT PANEL |
| 28 | 433V LT Indoor panel with 630 Amps Al. Busbars 100% for Phase and 50% for Neutral , Current Density of AL- 0.8 Amp/sqmm , Fabrication using 1.5/2mm CRCA sheet steel , Ingress protection IP4X , complete with internal wiring consisting of following. |
| 29 | INCOMER FROM TRANSFORMER |
| 30 | 630 Amps 433V 4P 50Hz 50KA remote wireless signal based electrically operated Type Moulded Case Circuit Breaker (MCCB) with microprocessor based overcurrent, short circuit Fault & earth fault Release, Digital Load Manager meter having SCADA communication facility and accuracy class 0.5, complete with required CTs and protection. |
| 31 | OUTGOINGS |
| 32 | 250 Amps 433V 3P 50Hz 36KA, TPN Moulded Case Circuit Breaker (MCCB) with microprocessor based release release for over current and magnetic short circuit. Multi function meter of accuracyclass |
| 33 | 100 Amps 433V 3P 50Hz 36KA, TPN Moulded Case Circuit Breaker (MCCB) with thermal magnetic release for over current and magnetic short circuit. Multi function meter of accuracyclass |
| 34 | OUTDOOR ENCLOSURE |
| 35 | Outdoor type enclosure having construction of Galvanised Sheet Steel of thickness minimum2mm & . Base plate should be 4mm thick. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Powder coated. Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each compartment. It should be internal arc test compliaint for 20KA for 1 sec. |
| 36 | Interconnection & Earthing |
| 37 | Interconnection Between HT switchgear & Transformer using 40x 10 Cu busbar or 1Cx3x95Sq.mm XLPE Single core cable & Interconnection between Transformer & LT switchgear using Al.Busbars. Internal earthing connections by using 50x6mm GI Strips. |
| 38 | The entire packaged / compact substation should be equipped with state of art SCADA system which will communicate with central command and control centre of mppkvvcl and smart city Ujjain's control centre and should also communicate event / fault alerts on mobile application. . The SCADA system should have all hardware like RTU, power supply, analog and digital I/O devices, battery, charger, software, modems, antenna, sensors, transducers, control wiring, PC/laptop etc. |
| 39 | PCV junction box 250*250 |
| 40 | PCV junction box 450*450 |
| 41 | Supply, installation, testing and commissioning of double pole structure comprising of 2 nos, 13 mtrs H-beam poles(37.1 kg/mtr) having 3-ph 11KV isolator , complete with 11KV pin / disc / post insulators, LA, 100x50 mm, MS cross channels, stay sets, coil earthing, ACSR O75 conductor etc, concreting etc complete in all respects suitable for terminating two nos 11KV, 3Cx240 sqmm XLPE insulated al. conductor arm. cables for tapping existing overhead line 11KV line feeder. |
| 42 | Feder PanelSupply,installation,testing and commissioning of outdoor type feeder pillar panels suitable for AC 440v, 50HZ supply, fabricated with 14 gauge galvanised steel sheet duly pre-treated and pure polyester thick powder coated and pure polyester thick powder coated 80 micron thickness using siemens grey colour shade no.RAL-7032/any other colour shade no.RAL- 7032/Any other colour if required by cubical formation, compartmentalized in form with front open able doors. The door shall be provided with concealed hinges and with brazing wherever required to avoid deformationand shall be earthed. All the door shall have heavy duty door locks, and shall be sealed with neoprene gaskets. the feeder pillar shall be IP 55, outdoor type weather, dust and vermin proof having canopy type tapered roof self-standing type as per approved GA Diagram. Panels shall have lifting hooks and base channel of size 50x40x6 mm The feeder pillar shall be complete with bus bars, wiring cabling of proper ratings (not less than 1.5 times the rating of respective switchgears, control gear etc.) for inter connection between switch gear, control gear, metering, safety relays, indicators etc. as per the approved single line diagram. the feeder pillar shall have proper arrangement for termination of all incoming and outgoing cables. all the bus bars shall be supported on epoxy supports and shall be insulated with colour coded heat shrinkable sleeves. Feeder pillar shall be as per the space available at site. It shall have earthing bolts at both sides inter connected with 50x5 mm al earthing bus along width of feeder pillar. NOTE :- The GA drawing for panel should be approved by consultant/ engineer in charge before fabrication. The feeder pillar shall have space and proper arrangements for installation of incoming and outgoing MCCBs with R,Y,B LED type indicating lamps.HRC fuse bases, MCBs etc. Complete with interconnection provisions with providing wiring and bus bars with required hardware,sleeves,ferrules,supporters,locks etc. Panel shall have proper space and arrangements for termination of incomer loop in loop out cables, outgoing service cables, with proper offsets in bus bars for cable terminations. The feeder pillar should have anti theft tamper proof feature to automatically send SMS alert if door opening is attempted by unauthorised person. Feeder pillar shall be comprising of following items: |
| 43 | TYPE - A |
| 44 | Rating of incomer MCCB TPN 63A, 25 KA (Adjustable thermal O/L with Ics=100% Icu).Outgoings 32A 25KA SP MCCB 12Nos. & 25A 25KA SP MCCB 18Nos.Note: The width of feeder pillar should be as minimum as possible,preferably not more than 800mm. |
| 45 | TYPE -B |
| 46 | Rating of incomer MCCB TPN 100A, 25 KA (Adjustable thermal O/L with Ics=100% Icu).Outgoings 32A 25KA SP MCCB 24Nos. & 25A 25KA SP MCCB 24Nos.Note: The width of feeder pillar should be as minimum as possible,preferably not more than 800mm. |
| 47 | Facade Lighting |
| 48 | Inground MonoSupply and fixing of recessed ground mounted deep 30w LED uplighter fixture with Honeycomb Louver. protected Uno PATHFINDER IP66 2700K-5500K 10deg-24deg as required. stainless steel body hard anodized aluminium finishes stainless steel & IK rating 08. Installation housing box power supply cables35 cm NS20N PCP 2x0,5 mm2 power supply 24V DC power consumption max 30 Watt lumen output 240-680lm working temperature-20°C +45°C IP rating IP66 (not for permanent immersion) insulation class III Weight upto 500gm. and delivers 90CRI for excellent colour rendering, PATHFINDER is smart shield protected against polarity inversion, an integrated super fast diode prevents accidental damage to the luminaire during installation on due to reverse polarity. Smart shield protects against ‘hot-plugging’. Fully integrated spike-reduce on protects the constant- current driver and prevents damage to the LED die surface. With housing |
| 49 | Inground RGBWSupply and fixing of recessed ground mounted deep 30w LED uplighter fixture with Honeycomb Louver. protected Uno PATHFINDER IP66 RGBW with DMX Driver to carry DMX 512 signal, 10deg-24deg as required. stainless steel body hard anodized aluminium finishes stainless steel & IK rating 08. Installation housing box power supply cables35 cm NS20N PCP 2x0,5 mm2 power supply 24V DC power consumption max 30 Watt lumen output 240-680lm working temperature-20°C +45°C IP rating IP66 (not for permanent immersion) insulation class III Weight upto 500gm. and delivers 90CRI for excellent colour rendering, PATHFINDER is smart shield protected against polarity inversion, an integrated super fast diode prevents accidental damage to the luminaire during installation on due to reverse polarity. Smart shield protects against ‘hot-plugging’. Fully integrated spike-reduce on protects the constant- current driver and prevents damage to the LED die surface. With housing |
| 50 | GOBO ProjectorSITC of Pole Mounted dynamic Image Gobo Projector: Material - Aluminium die-cast, Protection / Strength - The fixture shall be minimum IP66 compliant & with a mechanical strength of minimum IK07, Finish -As Black/ White. Electrical Parameters: The fixture shall have an in-built LED light source with non-integral control gear/System capable with control from DMX 512 protocol. Main controller DMX, Sub-Controllers, 12v 16 port DMX, Addressing Kit, DMX Amplifiers, Splitters, Boosters, Jumper and Leader Cables, etc. for Controlling Media Pixels is also in scope of the vendor as a complete system. The electronic power supply shall have protection against overvoltage /short circuit /power surge. THD < 7-10 Percent, PF > 0.9, Complete operation over a centralized DMX Controller or individually controlled by hand-held remote. International Electrotechnical Commission (IEC) standard IEC 60598, Indian standards - IS 10322, IS 16103:2012 (Parts 1 & 2), IS 16105: 2012, IS 16106: 2012, IS 16108: 2012. Mandatory BIS certification. Optical and Lighting Parameters: The fixture shall be capable of delivering between 7500 lumens (system lumens) in 3000K, (System efficacy ≥ 65lm/watt), Color Rendering Index ≥ 85, SDCM ≤ 4, The fixture shall be adjustable beam within the range of 15-30 degrees. Zoom able optics enabling to focus projection basis distance of projection. Zoomable optics enabling to focus projection basis distance of projection. Zoom from 15-30 deg to remove distortion if any. The Flood / Gobo should have a capacity of storing Minimum 4 Gobos which can be projected in repeated sequence or as per recall/ program of the software. Should have capability to control the speed of rotation as well as make it static by stopping rotation whenever required. Rated life of the fixture with control gear should be > 30,000 operation hours. The LED shall be compliant to LM-79 and LM-80 standards with published Type Test Reports Note: This includes all the required hardware for the successful installation and operation of the luminaire. (All the technical parameters of the luminaire need approval from the architect / lighting designer) |
| 51 | PixelFAÇADE LIGHTING SITC of Round Shape RGBW Pixel Light (system) Physical Parameters: The Fixtue shall be in diameter ≤ 55 mm and height ≤ 20 mm, Material - UV resistant polycarbonate body and outer Cover shall be made of PC, Protection / Strength - The fixture shall be minimum IP67 and ANSI 3G Vibration test compliant & with a mechanical strength of minimum IK06, The fixtures shall be in-built with IP67 male-female connectors, Finish - Standard White 9003 Color, Colour resolution - 16-Bit Grayscale, Gamma 2.0, Pixel Pitch: 300mm Electrical Parameters: The fixture shall have an in-built RGBW LED light source(4 addresses per pixel) with non integral control gear/System capable with control from DMX protocol . Main controller DMX, Sub-Controllers, 12v 16 port DMX, Addressing Kit, DMX Amplifiers, Splitters, Boosters, Jumper and Leader Cables, etc. for Controlling Media Pixels is also in scope of the vendor as a complete system. The electronic power supply/ Controls shall have protection against overvoltage /short circuit /power surge, THD < 7-10 Percent, PF > 0.9, Non-Dimmable, International Electrotechnical Commission (IEC) standard IEC 60598, Indian standards - IS 10322, IS 16103:2012 (Parts 1 & 2), IS 16105: 2012, IS 16106: 2012, IS 16108: 2012. Mandatory BIS certification. Optical and Lighting Parameters: The Pixel shall ≥ 2W in RGBW(W4000K) with lumen efficacy of 37.6lm/W, Color Rendering Index ≥ 80, SDCM ≤ 5. The fixture shall deliver symmetrical optics FWHM of 100-110 degrees, Rated life of the fixture with control gear should be > 50,000 operation hours. The LED shall be compliant to LM-79 and LM-80 standards with published Type Test Reports Note: This includes all the required hardware for the successful installation and operation of the luminaire. (All the technical parameters of the luminaire need approval from the architect / lighting designer) |
| 52 | Trick lightSITC of Round Surface Mounted Trick Light Material - Aluminium die-cast, Protection / Strength - The fixture shall be minimum IP66 compliant & with a mechanical strength of minimum IK07,The fixtures shall be installed with IP67 connectors. Finish - Rust Brown and powder coated Electrical Parameters: The fixture shall have an in-built LED light source with an integral control gear capable of running at a line voltage of 200-250 VAC. The electronic power supply shall have protection against overvoltage /short circuit /power surge. THD < 7-10 Percent, PF > 0.9, Non-Dimmable, International Electrotechnical Commission (IEC) standard IEC 60598, Indian standards - IS 10322, IS 16103:2012 (Parts 1 & 2), IS 16105: 2012, IS 16106: 2012, IS 16108: 2012. Mandatory BIS certification. Optical and Lighting Parameters: The fixture shall be capable to deliver between 60 lumens (system lumens) in 2700K, (System efficacy ≥ 25lm/watt), Color Rendering Index ≥ 85, SDCM ≤ 4, The fixture shall shall be with optics of 5° x180° degree. Rated life of the fixture with control gear should be > 50,000 operation hours. The LED shall be compliant to LM-79 and LM-80 standards with published Type Test Reports Note: This includes all the required hardware for the successful installation and operation of the luminaire. (All the technical parameters of the luminaire need approval from the architect / lighting designer) |
| 53 | Decorative Indoor Ring LightSITC-LED Pendant Ring 600 dia 40W Efficacy: 90lm Lumen: 1800 CRI :>80 Color Temperature: 3000K SDCM 3 Life Time: L70 50,000Hrs 230V Light Throw: Direct light emission Optics: Prismatic Diffuser Finish: White/ GOLD/ Bronze Control Gear: Electronic Control Protection Class: I IP 20 - Note: This includes all the required hardware for the successful installation and operation of the luminaire. (All the technical parameters of the luminaire need approval from the architect / lighting designer) |
| 54 | Decorative Indoor Disc LightSITC-Pendant luminaire DIsk type with 530 dia with HPE (High-Performance Efficiency) LED (Light Emitting Diode) system power: 45W luminous flux of luminaire 4500lm, Colour temperature of 3000K, Warm white, CRI>80, 230V constant current driver, 70 Percent of luminous flux after 50,000 operating hours; Energy efficientLEDs, Direct light emission, luminaire housing inaluminium, Polyester powder Grey coloured coat applied over a 5- stage pre-treatment, pre-wired backplate luminaire, Prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Pendent tube with a ball joint, for self-levelling (+/-20deg.). Protection class I, IP20 . Note: This includes all the required hardware for the successful installation and operation of the luminaire. (All the technical parameters of the luminaire need approval from the architect / lighting designer) |
| 55 | Master Controller DMXSupply, installation, testing and commissioning of main DMX Controller for controlling RGBW luminaires for powerful show storage and work as playback device capable of delivering light with each show to installations with up to 8 DMX512 universes, complete all as specified and directed by the engineer-in-charge. |
| 56 | Programming ChargesComplete Programming of RGBW DMX Based Fixtures and Scenes as required by Executive Engineer |
| 57 | ChandelierSITC of Traditional Chandelier with K9 Crystals and minium 1500mm dia and 1500 mm Height without hanging unit. It should have minimum of 120 e14 lamps holders in it. It should be hanged by SS Chain covered by suitable cloth. Lamp should be of 4w Led of repute Make. Finish should have a warranty of atleast 5 years from manufacturer and any color damage or shade variation of glass shall be replaced by contractor during the DLP period without any cost to client. It should have not weight less than 90 kgs |
| 58 | ChandelierSITC of Traditional Chandelier with K9 Crystals and minium 1000mm dia and 1200 mm Height without hanging unit. It should have minimum of 60 e14 lamps holders in it. It should be hanged by SS Chain covered by suitable cloth. Lamp should be of 4w Led of repute Make. Finish should have a warranty of atleast 5 years from manufacturer and any color damage or shade variation of glass shall be replaced by contractor during the DLP period without any cost to client. It should have not weight less than 30 kgs |
| 59 | Decorative Metal PendantSuppply, Installation, Testiing and Commissioning of Custom Pendant Light with Hammertone finish and PVD treatment (Allow60W) Fixture structure should be made of brass and may be given matt copper plating and effect and protected with PVD treatment. Custom Height suspension should be provide as per site requirement, including all other mounting and installation accesories. Luminaire with Line Voltage loadtype LED shall be provided with power supply and control unit.Color of light shall be determined during mockup by the interior design, architect and lighting designers. LED Lamps shall have CRI >80 and SCDM <=4, preferrably R9 > 70. Distribution of light shall be up and down.Contractor to provide shop drawing and material samples for design approval then do proto type at site/ at factory, do final mockup at site and get approval of designers and client prior to supply of actual piece. Contractor to obtain aesthetic appoval of lighting designer, architect and engneer in-charge after review of shop drawing, material sampling, proto type review and mockup at site. |
| 60 | Track LightSupply,of IP20 30W LED 30 degree distribution track mounted spotlight with Antiglare louvers, Monochrome white CCT ( Exact CCT to be determined by Lighting designer, Architect and Engineer in-charge on site after mock-up)Load type 220-240V AC, Minimum delivered lumen output 1500 lm, Minimum Efficacy 65 lm/W, CBCP≥25000cd, Lamp life 50,000hrs L90/b10, MacAdam ≤3, CRI ≥ 9, R9 range is 50-70 , Fixture Housing and luminaire head made of die-cast aluminium with powder-coated surface finish. Luminaire head should be tiltable from 0° to 90°. Screw for fixing the inclination angle. Housing can be rotated through 360° on the adapter. : polymer, white. LED module: high-power LEDs on metal-core PCB. . Finish to match with adjoining mounting surface finish color. Final Optics to be determined after mockup and to be confirmed with lighting designer prior to order. Provision of beam shaping accessory to be kept and provided as required.Vendor to Supply fixture with LED, all mounting and installation accessories. |
| 61 | Motif Pole BracketDouble-arm decorative bracket made of Steel with sheet metal laser cutting. Hight 700mm, top width 550mm. Sheet metal will have a thickness of 3mm and shall comprise LED Neon Flex Light With multiple Colour Options with individual Driver and suitable arm brackets with accessories for mounting. |
| 62 | Access Control System |
| 63 | BAGGAGE SCANNERSupply, Installation, Testing & Commissioning of X-ray Baggage Inspection System(X-BIS) equipment including control table as per technical specification.Tunnel Size: 640(W)×500(H) mm, Conveyor Speed: 0.22m/s, Conveyor Max Load:170 kg, Leakage radiation:<0.1μGy/h, Single inspection dosage: < 1.0Gy/h, Wire Resolution 40AWG, Steel Penetration: 36mm, Film Safety: For ISO 1600. X-Ray having following details: Beam Direction: Upward; Tube Current: 0.6mA; Anode voltage: 160KV; X-ray divergence angle: 80 °; Cooling: Sealed oil bath with forced air; Sealed oil bath with forced air/100%; Detector: L- shaped Array. Operating environment: Power Requirement: 220V AC (±10%) 0±3Hz, Power consumption: 1.0KW(Max), Noise level: <58dB, Spatial Resolution:1.0mm Horizontal and, Vertical Operating temperature/humidity: 0 deg.C. ~ 45 deg.C /20% ~ 95% (Non- condensing); Storage temperature/humidity: -20degC ~ 60degC/20% ~ 95% (Non-condensing) |
| 64 | DFMDSupply, Installation, Testing & Commissioning of 9-Zone Door Frame Metal Detector (DFMD) equipment of external size 870x2165x278mm (WxHxD) and internal size 720x2017x278mm (WxHxD), working on electromagnetic principles, made of ABS raw materials, frequency 0-100 Hz, Working humidity : 99%, non-condensing, Working temperature : - 20°C- 65°C, Input : AC 100 V-240 V/ Frequency 50HZ-60HZ, IP rating : 54 [Dust proof coating], Sensitivity adjustable : 0 - 400, Volume adjustable : 0 50, Alarm volume : 0 - 3 sec, Alarm tones : 15 different tone, Detection : Ferrous metals <75gm as per technical specification. |
| 65 | FRISKING BOOTHProvision and fixing of frisking booth including but not limited to canopy, female frisking booth, cloak room shelves, frisking table, revolving chairs, frisking pedestals etc. Item to include all material, labour, scaffolding and carriage in all leads, scaffolding and lifts complete as per satisfaction of engineer in charge. |
| 66 | HHMDSupply, Installation, Testing & Commissioning of Hand-Held Metal Detector (HHMD) equipment as per technical specification. Working frequency: 0~25 KHz; Net weight: ~400 gms; Power supply: Standard 6F22/15F8H; 9V battery or rechargeable battery; Temperature: -15℃ to+55℃; Detection Range: Pin : 25—70mm ; Type 64 pistol: 0—350mm; Six inch dagger 200—300mm; 20mm diameter steel balls 150mm; One ₹ coin120—180 mm； TF card, staples, 8-pin chip 10—40 mm. Having Twoalarm modes: audible and vibration mode, high-brightness LED lightindicator. Rugged, impact, free-fall drop height of 2 meters without damage. Light weight, large detection area fast detection speed.Continuous alarm function with low sound or vibration at the same time. After installing the rechargeable battery, it can be plugged directly into the original charger to charge. |
| 67 | Ticketing Platform OnboardingTicketing Platform Onboarding & Account Setup (BookMyShow / Paytm Insider) Vendor onboarding, account creation, KYC, event/venue listing. Scheduled Booking System Development + (Backend Database).Payment Integration, API Integration with Ticketing Platform. Additionally 2% Platform Fee + 2.5% to 5% of ticket sales (based on the payment medium) for RazorPay |
| 68 | Counter SystemTicket Counter System, Validation Device |
| 69 | FIRE FIGHTING BOQ |
| 70 | Providing and fixing of flexible Connection/Rubber Bellow. |
| 71 | 200MM |
| 72 | 150MM |
| 73 | 100MM |
| 74 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 75 | 32 mm dia |
| 76 | Providing and fixing Float Valve : |
| 77 | 25 mm dia |
| 78 | Providing fixing, including testing and commissioning the following size of flanged type sluice valve of cast iron body and bronze/ gun metal seat confirming to class PN 1.6 of IS: 14846/IS: 780 complete with bolts and nuts, rubber insertions etc. as per specification complete as required. |
| 79 | 250MM |
| 80 | Supply installation of Tank sleeve mounted suction strainer with The filter media is a woven stainless mesh of pleated construction supported on the inside by a perforated steel tube. The pleats provide a generous area of filtration in relation to the overall size. The pleated element and perforated steel tube are bonded to the end caps with epoxy resin. One end blind and the other is threaded. Fluid flow is radially inwards through the pleated element so that contaminants are deposited on the outside of the strainer where they may be removed easily by immersing in cleaning solution. The Strainer is mounted with SS Flange bolted with SS 304 Bolt inside tank to avoid rusting. The strainer is made up of Perforated SS 304 Sheet the thickness of sheet will not be less the 16 Gauge with 40-45% Perforation and internally mounted fine SS wiremesh 140- 262 micron. |
| 81 | Suction Strainer Sleeve and SS flanged coupled 250 MM Diameter |
| 82 | SITC of Combination Air Release Valve for fire water mains, ductile iron/SS body with large-orifice and small-orifice mechanism, flanged ends ANSI Class 150, epoxy-coated internal/external. Installed at pipeline high points and at split-case fire pump casing (as applicable). Includes isolation sluice/butterfly valve, bypass, fittings, testing, and commissioning per NFPA 20 |
| 83 | 25 mm dia |
| 84 | 32 mm dia |
| 85 | Providing and fixing of Fire Extinguisher Clean Agent HCFC 123 Providing 6Kg Stored Pressure Type, Pressure Gauge, Gross Weight 9.4kg. empty weight 3.4 kg Can Height 480MM, Diameter 160 MM, Discharge Time less than 13 Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating 2A, B Rating 21B Can Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, EN Approved, 5 years warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., complete |
| 86 | Supply, installation, testing and commissioning of Fire Axe of approved make, conforming to IS: 926 (or equivalent standard), with insulated handle and suitable mounting arrangement inside the Fire Box / Fire Station cabinet, complete as required. |
| 87 | Public Address |
| 88 | Area Name:- Zone 1 Area Name:- Visitor Entry, Service Area, All PathwayApplication Name:- BGMApplication Type:- BGMType:- Outdoor Pole Mounted SpeakerSupply, installation, testing and commissioning of Full range 4-inch or better IP55 rated surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 70Hz to 19kHz; Power handling of 160 Watt peak; Nominal dispersion of 90°(H) × 80°(V); Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak or better; Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. |
| 89 | Supply, installation, testing and commissioning of Custom Fabricated bracket for Pole Mounting of speaker |
| 90 | Area Name:- Zone 1 Area Name:- Visitor Entry, Service Area, All PathwayApplication Name:- BGMApplication Type:- BGMType:- Power Amplifier LMT BasedSITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The Amplifier shall have 600 watts output power asymmetrically distributed across 4 output channels with selectable 4/8ohms, 70/100 Volt or mixed use operation.The amplifier shall have four analog and dante channels ; Frequency Response : 20Hz - 20kHz ; S/N Ratio > 100db and THD < 0.04% at rated output. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals,Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc |
| 91 | Area Name:- Zone 2Area Name:- Introduction to Sandipani AashramApplication Name:- Sandipani StatueApplication Type:- Informative, BGMType:- Outdoor Floor Mounted - LandscapeSupply, installation, testing and commissioning of Full-range environmental loudspeaker with one downward firing 4.5-inch (114 mm) IP55-rated advance composite environmental full-range driver for in-ground or above-ground mounting The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 60Hz to 15kHz or better; Power handling of 64 Watt peak or more; Nominal dispersion of 360° (H) X 50° (V) or better; Sensitivity of 87 dB SPL or more and Max SPL of 106 dB SPL peak or better; Nominal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 10/20/40/80 watts@70V & 100V. The loudspeaker system shall be enclosed in Glass-reinforced polypropylene, textured. |
| 92 | Area Name:- Zone 2Area Name:- Introduction to Sandipani AashramApplication Name:- Sandipani StatueApplication Type:- Informative, BGMType:- Near Statue - Mount on tree for narativeSupply, installation, testing and commissioning of IP55 Rated for Indoor and Outdoor installations, Full range drivers (8 or better) in an articulated Array design. Minimum eight 4.5” full-range cone transducers or better. Frequency Range (-10db) of 52 Hz - 15 kHz orbetter; Continuous power (AES) : 300W & Peak Power (AES) : 1200W @ 8 Ohms or better; Nominal dispersion of 120H X 100V or better; Sensitivity of 91 dB or better; Max SPL Peak of 121 dB or better; Powder coated steel grille. |
| 93 | Area Name:- Zone 2Area Name:- Introduction to Sandipani AashramApplication Name:- Sandipani StatueApplication Type:- Informative, BGMType:- Power Amplifier LMT BasedSITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The Amplifier shall have 400 watts output power asymmetrically distributed across 4 output channels with selectable 4/8ohms, 70/100 Volt or mixed use operation.The amplifier shall have four analog and dante channels ; Frequency Response : 20Hz - 20kHz ; S/N Ratio > 100db and THD < 0.04% at rated output. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals,Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc |
| 94 | Area Name:- Zone 2SITC of class D amplifier with 4 x 300 W Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging .Amplifier shall have frequency response of 20 Hz to 20 kHz (+/- 1 dB) for LZ mode,with THD+N at rated power less than 0.04%.The amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 dB below rated power at 1 kHz. . The amplifier shall have 2 line-level inputs with selectable input sensitivity settings ( -10 dBV, 4 dBu and 14 dBu) for balanced line-level inputs (6-pin Euroblock connector) and possiblity of 4 or more no .of digital Audio channels . The amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier. |
| 95 | Area Name:- Zone 2Application Name:- Sandipani Book mural Application Type:- InformativeType:- Indoor Wall Mounted Speakers surrounding the MuralSupply , installation , testing and commissioning of full range 2.25-inch or better pendant ceiling mounted music and PA loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10 dB) of 83Hz to 19kHz or better; Power handling of 64 Watt peak or more; Nominal dispersion of >=90° Conical or better; Sensitivity of 86 dB SPL or better and Max SPL of 104 dB SPL peak or more; Nominal impedence of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V or better. The loudspeaker shall be enclosed in engineered-plastics and a powder-coated steel grille. |
| 96 | Area Name:- Zone 2Type:- Power Amplifier Ohms/LMT BasedSITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The Amplifier shall have 400 watts output power asymmetrically distributed across 4 output channels with selectable 4/8ohms, 70/100 Volt or mixed use operation.The amplifier shall have four analog and dante channels ; Frequency Response : 20Hz - 20kHz ; S/N Ratio > 100db and THD < 0.04% at rated output. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals,Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc |
| 97 | Area Name:- Zone 2Application Name:- GuruDakshina Story MuralApplication Type:- InformativeType:- Indoor Wall Mounted Speakers surrounding the MuralSupply , installation , testing and commissioning of full range 2.25-inch or better pendant ceiling mounted music and PA loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10 dB) of 83Hz to 19kHz or better; Power handling of 64 Watt peak or more; Nominal dispersion of >=90° Conical or better; Sensitivity of 86 dB SPL or better and Max SPL of 104 dB SPL peak or more; Nominal impedence of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V or better. The loudspeaker shall be enclosed in engineered-plastics and a powder-coated steel grille. |
| 98 | Area Name:- Zone 2Type:- Power Amplifier Ohms/LMT BasedSITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The Amplifier shall have 400 watts output power asymmetrically distributed across 4 output channels with selectable 4/8ohms, 70/100 Volt or mixed use operation.The amplifier shall have four analog and dante channels ; Frequency Response : 20Hz - 20kHz ; S/N Ratio > 100db and THD < 0.04% at rated output. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals,Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc |
| 99 | Area Name:- Zone 2Application Name:- Common AV Rack Backend - ZONE 2Type:- Local Audio playback deviceSupply, installation, testing and commissioning of 6-zone, 12-channel Class D streaming amplifier delivering featuring AirPlay 2, Chromecast, Spotify Connect, and Alexa Cast for seamless wireless audio, plus traditional analog/optical inputs, 7-band EQ, and integration with 3rd party control processors for multi zone audio control. It should be capable of work with a NAS (Network Attached Storage) drive. Should be capable of accessing and play local music files stored on a NAS through the VSSL system using compatible streaming apps. |
| 100 | Area Name:- Zone 2Type:- Control System ProcessorAutomation Controller Control Engine 4-Series multicore CPU, 2GB SDRAM, 8GB Flash Programming Modular Architecture (up to 10 simultaneous programs) Network 1x Gigabit Ethernet (802.1X, SSH, TLS, XiO Cloud ready)Serial Ports 3x RS-232/422/485 COM ports Control I/O 8x IR/Serial outputs, 8x isolated relays, 8x Versiports System Bus 1x Cresnet® master port Security FIPS 140-2 compliant, Active Directory, SNMP V3 Form Factor 1 RU rack-mount chassis Compliance UL Listed, CE, FCC Part 15 Class B, Apple HomeKit compatible |
| 101 | Area Name:- Zone 2Type:- Control System wired Keypad / wireless ipadHandheld wifi Tablet for controlling AV . Display 10.1\\" to 10.9\\" IPS/LCD or AMOLED; Resolution: 1920 x 1200 (WUXGA) or higher; Brightness: 400+ nits.Processor Octa-core CPU (minimum 2.0 GHz); 4nm or 6nm architecture for power efficiency. Operating System Android 14.0/15.0 or iPadOS 18; must support multi-year security patches. Memory & Storage RAM: 4 GB (minimum) to 8 GB; Internal Storage: 64 GB to 128 GB (expandable via MicroSD up to 1 TB). Connectivity Wi-Fi 6 (802.11ax), Bluetooth 5.3, and optional 4G LTE/5G (Nano SIM/eSIM support). Camera Rear: 8 MP with Auto-Focus; Front: 5 MP (minimum) for video conferencing. Battery 6,000 mAh to 8,000 mAh; support for 15W+ fast charging via USB-C. Security Biometric (Face Unlock or Fingerprint); support for Mobile Device Management (MDM) enrollment (e.g., Knox, Apple Business Manager). |
| 102 | Area Name:- Zone 2Type:- 24 Port 1 gig POE+ Network SwitchL3 Network Switch with specification Port Density 26 x 1G ports (24 PoE+) + 4 x 10G SFP+ Uplinks PoE Power 480W total budget (802.3at PoE+ up to 30W/port) Switching Fabric 132 Gbps non-blocking; Layer 2/Layer 3 Lite (Static/PIM) AV Optimization Pre-configured profiles for Dante, Q-SYS, NDI, and AES67 Multicast IGMP Plus™ for instant out-of-the-box AVoIP setup Form Factor 1 RU, rear-facing ports with reversible rack-mount optionsAcoustics Software-controlled fans for \\"Quiet Mode\\" operation |
| 103 | Area Name:- Zone 3Area Name:- Education and Study TraditionsApplication Name:- 64 VaidyasApplication Type:- InformativeType:- Indoor Wall Mounted Speakers surrounding the MuralsSupply , installation , testing and commissioning of full range 2.25-inch or better pendant ceiling mounted music and PA loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10 dB) of 83Hz to 19kHz or better; Power handling of 64 Watt peak or more; Nominal dispersion of >=90° Conical or better; Sensitivity of 86 dB SPL or better and Max SPL of 104 dB SPL peak or more; Nominal impedence of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V or better. The loudspeaker shall be enclosed in engineered-plastics and a powder-coated steel grille. |
| 104 | Area Name:- Zone 3Area Name:- Education and Study TraditionsApplication Name:- 64 VaidyasApplication Type:- InformativeType:- Power Amplifiers SITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The Amplifier shall have 400 watts output power asymmetrically distributed across 4 output channels with selectable 4/8ohms, 70/100 Volt or mixed use operation.The amplifier shall have four analog and dante channels ; Frequency Response : 20Hz - 20kHz ; S/N Ratio > 100db and THD < 0.04% at rated output. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals,Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc |
| 105 | Area Name:- Zone 3Common AV Rack Backend - ZONE 3Type:- Local Audio playback deviceSupply, installation, testing and commissioning of 6-zone, 12-channel Class D streaming amplifier delivering featuring AirPlay 2, Chromecast, Spotify Connect, and Alexa Cast for seamless wireless audio, plus traditional analog/optical inputs, 7-band EQ, and integration with 3rd party control processors for multi zone audio control. It should be capable of work with a NAS (Network Attached Storage) drive. Should be capable of accessing and play local music files stored on a NAS through the VSSL system using compatible streaming apps. |
| 106 | Area Name:- Zone 3Control System ProcessorAutomation Controller Control Engine 4-Series multicore CPU, 2GB SDRAM, 8GB Flash Programming Modular Architecture (up to 10 simultaneous programs) Network 1x Gigabit Ethernet (802.1X, SSH, TLS, XiO Cloud ready)Serial Ports 3x RS-232/422/485 COM ports Control I/O 8x IR/Serial outputs, 8x isolated relays, 8x Versiports System Bus 1x Cresnet® master port Security FIPS 140-2 compliant, Active Directory, SNMP V3 Form Factor 1 RU rack-mount chassis Compliance UL Listed, CE, FCC Part 15 Class B, Apple HomeKit compatible |
| 107 | Area Name:- Zone 3Control System wired Keypad / wireless ipadHandheld wifi Tablet for controlling AV . Display 10.1\\" to 10.9\\" IPS/LCD or AMOLED; Resolution: 1920 x 1200 (WUXGA) or higher; Brightness: 400+ nits.Processor Octa-core CPU (minimum 2.0 GHz); 4nm or 6nm architecture for power efficiency. Operating System Android 14.0/15.0 or iPadOS 18; must support multi-year security patches. Memory & Storage RAM: 4 GB (minimum) to 8 GB; Internal Storage: 64 GB to 128 GB (expandable via MicroSD up to 1 TB). Connectivity Wi-Fi 6 (802.11ax), Bluetooth 5.3, and optional 4G LTE/5G (Nano SIM/eSIM support). Camera Rear: 8 MP with Auto-Focus; Front: 5 MP (minimum) for video conferencing. Battery 6,000 mAh to 8,000 mAh; support for 15W+ fast charging via USB-C. Security Biometric (Face Unlock or Fingerprint); support for Mobile Device Management (MDM) enrollment (e.g., Knox, Apple Business Manager). |
| 108 | Area Name:- Zone 324 Port 1 gig POE+ Network SwitchL3 Network Switch with specification Port Density 26 x 1G ports (24 PoE+) + 4 x 10G SFP+ Uplinks PoE Power 480W total budget (802.3at PoE+ up to 30W/port) Switching Fabric 132 Gbps non-blocking; Layer 2/Layer 3 Lite (Static/PIM) AV Optimization Pre-configured profiles for Dante, Q-SYS, NDI, and AES67 Multicast IGMP Plus™ for instant out-of-the-box AVoIP setup Form Factor 1 RU, rear-facing ports with reversible rack-mount optionsAcoustics Software-controlled fans for \\"Quiet Mode\\" operation |
| 109 | Area Name:- Zone 4Area Name:- Lifestyle and Daily Cycle ExperienceApplication Name:-Krishnaji Kund InstallationApplication Type:- Light and Sound showType:- Outdoor Pole Mounted Arrayble/powerful speakersSupply, installation, testing & Commissioning of a Biamplified, 2 Way Progressive directivity Loudpseaker Array. Individual loudspeaker modules within the array shall meet the following criteria: Usable Frequency Range (-10dB) of 55 Hz - 18 kHz and Continuous Power Handling of >=600W LF + 150W MF-HF. There shall be LF driver of at least 14\\" in each module, and 6 compression drivers of 2\\" voice coil or better in a CADS Manifold. The Loudspeaker shall have a Max. SPL (Peak) of >=128 dB or better for LF and 133dB for MF-HF. It should have suitable Drivers for LF and MF/HF with Horizontal dispersion pattern of 90º or better (with multiple waveguide options, Vertical dispersion of the array shall be 60 degrees or better. The loudspeaker module shall be comprised of a shall be of Baltic birch plywood construction with IP55 weather rating |
| 110 | Area Name:- Zone 4Type:- Outdoor SubwoofersSupply, installation, testing & Commissioning of a single 18\\" subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 28 Hz - 300Hz or better. It should have an axial Sensitivity of > = 92dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of >=127 db or better. The loudspeaker should have a nominal impedance: 4 ohm or more and continuous Power Handling of 600W or more; Complete with installation as per the site requirement. |
| 111 | Area Name:- Zone 4Type:- Power Amplifiers SITC of Digital Dante Amplifier with Max output power of 4x1200W@4-8Ohms, 70V or 100V or bridged mode output power of 2x3000W@4ohms. Frequency response of 20 Hz - 20 kHz, SNR of >110 dB(A and THD+N < 0.1%. With Multiple channel metering LED and attenuation controls. PEQ, band pass, Spkr EQ, limiter, delay. Maximum input level 20 dBu. 4 Digital channels via Dante, with Euroblock, 8-pin connectors for Analog outputs. Software and hardware controlled. Sample rate 24-bit, 44.1 kHz – 192 kHz. |
| 112 | Area Name:- Zone 4Type:- Power Amplifiers SITC of Digital Dante Amplifier with Max output power of 4x1200W@4-8Ohms, 70V or 100V or bridged mode output power of 2x3000W@4ohms. Frequency response of 20 Hz - 20 kHz, SNR of >110 dB(A and THD+N < 0.1%. With Multiple channel metering LED and attenuation controls. PEQ, band pass, Spkr EQ, limiter, delay. Maximum input level 20 dBu. 4 Digital channels via Dante, with Euroblock, 8-pin connectors for Analog outputs. Software and hardware controlled. Sample rate 24-bit, 44.1 kHz – 192 kHz. |
| 113 | Area Name:- Zone 4Area Name:- Lifestyle and Daily Cycle ExperienceApplication Name:-Common AV Rack Backend - ZONE 4Type:- Local Audio playback deviceSupply, installation, testing and commissioning of 6-zone, 12-channel Class D streaming amplifier delivering featuring AirPlay 2, Chromecast, Spotify Connect, and Alexa Cast for seamless wireless audio, plus traditional analog/optical inputs, 7-band EQ, and integration with 3rd party control processors for multi zone audio control. It should be capable of work with a NAS (Network Attached Storage) drive. Should be capable of accessing and play local music files stored on a NAS through the VSSL system using compatible streaming apps. |
| 114 | Area Name:- Zone 4DSPSITC of Integrated Digital Sound Processor with following functionalities and specifications;Signal Processor shall be CPU-32-bit fixed/floating-point DSP + ARM, 456 MHz.The DSP shall have 8 Mic/Line inputs & 8 analog outputs, 8 Additonal digital Outputs; 24 Bit A-D and D-A Convertors; Sampling Rate : 48 kHz; THD : < 0.002 % ; Channel Separation (Crosstalk) : < 105 dB ; Frequency Response 20 Hz - 20 kHz ; Dynamic Range : > 115 dB; 5 Control Inputs and Outputs; RS-232 and Ethernet Port for third party Control and Monitoring; inbuilt DSP features like automatic mic mixing, multiband graphic and parametric EQs, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors, and delays. etc. Shall Support at least 15 remote Zone controllers |
| 115 | Area Name:- Zone 4Control System ProcessorAutomation Controller Control Engine 4-Series multicore CPU, 2GB SDRAM, 8GB Flash Programming Modular Architecture (up to 10 simultaneous programs) Network 1x Gigabit Ethernet (802.1X, SSH, TLS, XiO Cloud ready)Serial Ports 3x RS-232/422/485 COM ports Control I/O 8x IR/Serial outputs, 8x isolated relays, 8x Versiports System Bus 1x Cresnet® master port Security FIPS 140-2 compliant, Active Directory, SNMP V3 Form Factor 1 RU rack-mount chassis Compliance UL Listed, CE, FCC Part 15 Class B, Apple HomeKit compatible |
| 116 | Area Name:- Zone 4Control System wired Keypad / wireless ipadHandheld wifi Tablet for controlling AV . Display 10.1\\" to 10.9\\" IPS/LCD or AMOLED; Resolution: 1920 x 1200 (WUXGA) or higher; Brightness: 400+ nits.Processor Octa-core CPU (minimum 2.0 GHz); 4nm or 6nm architecture for power efficiency. Operating System Android 14.0/15.0 or iPadOS 18; must support multi-year security patches. Memory & Storage RAM: 4 GB (minimum) to 8 GB; Internal Storage: 64 GB to 128 GB (expandable via MicroSD up to 1 TB). Connectivity Wi-Fi 6 (802.11ax), Bluetooth 5.3, and optional 4G LTE/5G (Nano SIM/eSIM support). Camera Rear: 8 MP with Auto-Focus; Front: 5 MP (minimum) for video conferencing. Battery 6,000 mAh to 8,000 mAh; support for 15W+ fast charging via USB-C. Security Biometric (Face Unlock or Fingerprint); support for Mobile Device Management (MDM) enrollment (e.g., Knox, Apple Business Manager). |
| 117 | Area Name:- Zone 424 Port 1 gig POE+ Network SwitchL3 Network Switch with specification Port Density 26 x 1G ports (24 PoE+) + 4 x 10G SFP+ Uplinks PoE Power 480W total budget (802.3at PoE+ up to 30W/port) Switching Fabric 132 Gbps non-blocking; Layer 2/Layer 3 Lite (Static/PIM) AV Optimization Pre-configured profiles for Dante, Q-SYS, NDI, and AES67 Multicast IGMP Plus™ for instant out-of-the-box AVoIP setup Form Factor 1 RU, rear-facing ports with reversible rack-mount optionsAcoustics Software-controlled fans for \\"Quiet Mode\\" operation |
| 118 | Area Name:- Zone 5Application Name:- Sensory KioskApplication Type:- InformativeType:- Small Speakers hidden inside kioskSupply, installation, testing and commissioning of Full range 2.25-inch or better IP55 rated surface mounted music and PA loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 83Hz to 19kHz or better; Power handling of 64 Watt peak or more; Nominal dispersion of 100°(H) × 80°(V) or better; Sensitivity of 84 dB SPL or more and Max SPL of 103 dB SPL peak or better; Nominal impedance of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. |
| 119 | Area Name:- Zone 5Application Name:- Sensory KioskApplication Type:- InformativeType:- Micro Amplifier Supply, installation, testing and commissioning of Class D mixer/amplifier with 48 kHz, 24-bit digital signal processing architecture. The mixer/amplifier shall include protection from shorted loads and general overheating.The mixer/amplifier shall have one output channel and drive 70/100 V distributed audio systems. The output power shall be 100 watts. The loudspeaker output connections shall be one 3-pin Euroblock connector. The auxiliary line output shall be two RCA connectors. The digital signal processor shall include selectable EQ presets to be applied to the loudspeaker outputs and the auxiliary output. The mixer/amplifier shall have two line-level inputs (two RCA stereo pairs), one Bluetooth wireless signal input, one front-panel mic/line input (one XLR/¼-inch connector), and one paging microphone input (one 4-pin Euroblock connector). The line-level inputs and Bluetooth signal input shall be selectable via a switch on the front panel. All inputs shall have individual input gain controls except for the Bluetooth signal. The frequency response of the mixer/amplifier shall be 70 Hz to 18 kHz (+0/-4 dB). The THD+N at rated power shall be less than or equal to 0.3%. The dynamic range shall be 88 dB. The nominal input sensitivity shall be -10 dBV for line-level inputs and -58 dBV for paging microphone inputs.Various settings of the mixer/amplifier shall be configurable by a front-panel OLED display and a rotary encoder to navigate the menu/interface and adjust settings. The mixer/amplifier shall have one port intended for use with analog controllers. The mixer/amplifier shall have a mute connection for use with external dry contacts to mute the loudspeaker outputs and auxiliary output. |
| 120 | Area Name:- Zone 5Application Name:- Jyotish ShastraApplication Type:- InformativeType:- Wall Mounted 5.1 surround soud system with surround effectSupply, installation, testing and commissioning of two-way 5.25-inch or better high SPL IP55 rated surface mount loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90Hz - 18 kHz or better; Nominal Dispersion : 90°H x 80°V or better; Power handling of 400W peak or more; Sensitivity : 86 dB or better and the Max SPL : 116dB Peak or more with a Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 10/20/40/80W@70V & 100V; Standard wall mount brackets shall be included |
| 121 | Area Name:- Zone 5Application Name:- Jyotish ShastraApplication Type:- InformativeType:- SubwooferSupply, installation, testing and commissioning of compact powered portable Subwoofer . The louspeaker shall meet the following criteria: built-in amplifier with a system power of 1000W ; Frequency Range (-10 dB) of 38 Hz - 250 Hz; Norminal dispersion shall be omni-directional; The loudspeaker shall have a Max SPL : 130 dB SPL. The loudspeaker system shall be comprised of a powder-coated perforated steel grille; two 10\\" high-excursion drivers; Shall have 2 balanced line level inputs and 2 balanced line level outputs; Shall have built-in protection for signal overload. shall include necessary arrangement mounting a Mid/high loudspeaker on the subwoofer. |
| 122 | Area Name:- Zone 5Application Name:- Jyotish ShastraApplication Type:- InformativeType:- Power AmplifierSupply, installation, testing and commissioning of Class D mixer/amplifier with 48 kHz, 24-bit digital signal processing architecture.The mixer/amplifier shall include protection from shorted loads and general overheating.The mixer/amplifier shall have two output channels and drive 4–8 Ω low-impedance systems. The output power shall be 160 watts per channel at 4 Ω and 80 watts per channel at 8 Ω. The loudspeaker output connections shall be two 2-pin Euroblock connectors. The auxiliary line output shall be two RCA connectors. The digital signal processor shall include selectable EQ presets to be applied to the loudspeaker outputs and the auxiliary output. The mixer/amplifier shall have four line-level inputs (two RCA stereo pairs, two 5-pin Euroblock connectors), one Bluetooth wireless signal input, and one paging microphone input (one 4-pin Euroblock connector). The line-level inputs and Bluetooth signal input shall be selectable via a switch on the front panel.The frequency response of the mixer/amplifier shall be 20 Hz to 20 kHz (+0/-3 dB). The THD+N at rated power shall be less than or equal to 0.5%. The channel separation (crosstalk) shall be less than or equal to -58 dB below rated power at 1 kHz. The dynamic range shall be 88 dB. The nominal input sensitivity shall be -8 dBu for line level inputs and -58 dBu for paging microphone inputs.. Various settings of the mixer/amplifier shall be configurable by a front-panel OLED display and a rotary encoder to navigate the menu/interface and adjust settings.The mixer/amplifier shall have one port intended for use with analog controllers. The mixer/amplifier shall have a mute connection for use with external dry contacts to mute the loudspeaker outputs and auxiliary output. |
| 123 | Area Name:- Zone 5Application Name:- Jyotish ShastraApplication Type:- InformativeType:- Power AmplifierSupply, installation, testing and commissioning of Class D mixer/amplifier with 48 kHz, 24-bit digital signal processing architecture.The mixer/amplifier shall include protection from shorted loads and general overheating.The mixer/amplifier shall have two output channels and drive 70/100 V distributed audio systems with a rear-panel switch to select 70 V or 100 V. The output power shall be 160 watts per channel. The loudspeaker output connections shall be two 2-pin Euroblock connectors. The auxiliary line output shall be two RCA connectors. The digital signal processor shall include selectable EQ presets to be applied to the loudspeaker outputs and the auxiliary output. The mixer/amplifier shall have four line-level inputs (two RCA stereo pairs, two 5-pin Euroblock connectors), one Bluetooth wireless signal input, and one paging microphone input (one 4-pin Euroblock connector). The line-level inputs and Bluetooth signal input shall be selectable via a switch on the front panel. The frequency response of the mixer/amplifier shall be 20 Hz to 20 kHz (+0/-3 dB). The THD+N at rated power shall be less than or equal to 0.5%. The channel separation (crosstalk) shall be less than or equal to -58 dB below rated power at 1 kHz. The dynamic range shall be 88 dB. The nominal input sensitivity shall be -8 dBu for line level inputs and -58 dBu for paging microphone inputs.Various settings of the mixer/amplifier shall be configurable by a front-panel OLED display and a rotary encoder to navigate the menu/interface and adjust settings.The mixer/amplifier shall have one port intended for use with analog controllers. The mixer/amplifier shall have a mute connection for use with external dry contacts to mute the loudspeaker outputs and auxiliary output. |
| 124 | Area Name:- Zone 5Application Name:- Jyotish ShastraApplication Type:- InformativeType:- AVR along with power amplifierAmplification 7.2 Channels; 100W per channel (8 ohm, 20Hz–20kHz, 0.08% THD) Video Support 8K/60Hz and 4K/120Hz pass-through; HDR10+, Dolby Vision, Dynamic HDR Audio Formats Dolby Atmos, DTS:X, and DTS Virtual:X HDMI Connectivity 6 HDMI inputs (3 supporting 8K) and 2 HDMI outputs (eARC support) Streaming HEOS® Built-in (Spotify, Amazon Music HD, Tidal), AirPlay 2, Bluetooth Audio Tech Discrete HDAM amplifier modules and Current Feedback circuitry Calibration Audyssey MultEQ XT room correction built-in Voice Control Alexa, Google Assistant, and Apple Siri compatible |
| 125 | Area Name:- Zone 5Application Name:- Digital Tactile TableApplication Type:- InformativeType:- Indoor Wall Mounted speakers surrounding the murals giving directional soundSupply, installation, testing and commissioning of Full range 2.25-inch or better IP55 rated surface mounted music and PA loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 83Hz to 19kHz or better; Power handling of 64 Watt peak or more; Nominal dispersion of 100°(H) × 80°(V) or better; Sensitivity of 84 dB SPL or more and Max SPL of 103 dB SPL peak or better; Nominal impedance of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. |
| 126 | Area Name:- Zone 5Application Name:- Digital Tactile TableApplication Type:- InformativeType:- Power AmplifierSupply, installation, testing and commissioning of Class D mixer/amplifier with 48 kHz, 24-bit digital signal processing architecture. The mixer/amplifier shall have two output channels and drive 4–8 Ω low-impedance systems. The output power shall be 50 watts per channel at 4 Ω and 25 watts per channel at 8 Ω. The mixer/amplifier shall have two line-level inputs (two RCA stereo pairs), one Bluetooth wireless signal input, one front-panel mic/line input (one XLR/¼-inch connector), and one paging microphone input (one 4-pin Euroblock connector). The line-level inputs and Bluetooth signal input shall be selectable via a switch on the front panel. The frequency response of the mixer/amplifier shall be 40 Hz to 18 kHz (+0/-3 dB). The THD+N at rated power shall be less than or equal to 0.3%. The channel separation (crosstalk) shall be less than or equal to -60 dBV below rated power at 1 kHz. The dynamic range shall be 88 dB. The nominal input sensitivity shall be -10 dBV for line-level inputs and -58 dBV for paging microphone inputs. Various settings of the mixer/amplifier shall be configurable by a front-panel OLED display and a rotary encoder to navigate the menu/interface and adjust settings.The mixer/amplifier shall include protection from shorted loads and general overheating. The mixer/amplifier shall have venting with a natural-convection cooling system. The mixer/amplifier shall have one port intended for use with analog controllers. The mixer/amplifier shall have a mute connection for use with external dry contacts to mute the loudspeaker outputs and auxiliary output. |
| 127 | Area Name:- Zone 5Application Name:- Digital Tactile TableApplication Type:- InformativeType:- Dante input AdapterSupply, installation, testing and commissioning of 2 Channel Dante AVIO Analog Input Adapter with RJ45 and 2 XLR females |
| 128 | Area Name:- Zone 5Application Name:- Digital Tactile TableApplication Type:- InformativeType:- Dante Output AdapterSupply, installation, testing and commissioning of 2 Channel Dante AVIO Analog Output Adapter with RJ45 and 2 XLR females |
| 129 | Common AV Rack Backend - ZONE 5Local Audio playback deviceSupply, installation, testing and commissioning of 6-zone, 12-channel Class D streaming amplifier delivering featuring AirPlay 2, Chromecast, Spotify Connect, and Alexa Cast for seamless wireless audio, plus traditional analog/optical inputs, 7-band EQ, and integration with 3rd party control processors for multi zone audio control. It should be capable of work with a NAS (Network Attached Storage) drive. Should be capable of accessing and play local music files stored on a NAS through the VSSL system using compatible streaming apps. |
| 130 | Area Name:- Zone 5Control System Processor Automation Controller Control Engine 4-Series multicore CPU, 2GB SDRAM, 8GB Flash Programming Modular Architecture (up to 10 simultaneous programs) Network 1x Gigabit Ethernet (802.1X, SSH, TLS, XiO Cloud ready)Serial Ports 3x RS-232/422/485 COM ports Control I/O 8x IR/Serial outputs, 8x isolated relays, 8x Versiports System Bus 1x Cresnet® master port Security FIPS 140-2 compliant, Active Directory, SNMP V3 Form Factor 1 RU rack-mount chassis Compliance UL Listed, CE, FCC Part 15 Class B, Apple HomeKit compatible |
| 131 | Area Name:- Zone 5Control System wired Keypad / wireless ipadHandheld wifi Tablet for controlling AV . Display 10.1\\" to 10.9\\" IPS/LCD or AMOLED; Resolution: 1920 x 1200 (WUXGA) or higher; Brightness: 400+ nits.Processor Octa-core CPU (minimum 2.0 GHz); 4nm or 6nm architecture for power efficiency. Operating System Android 14.0/15.0 or iPadOS 18; must support multi-year security patches. Memory & Storage RAM: 4 GB (minimum) to 8 GB; Internal Storage: 64 GB to 128 GB (expandable via MicroSD up to 1 TB). Connectivity Wi-Fi 6 (802.11ax), Bluetooth 5.3, and optional 4G LTE/5G (Nano SIM/eSIM support). Camera Rear: 8 MP with Auto-Focus; Front: 5 MP (minimum) for video conferencing. Battery 6,000 mAh to 8,000 mAh; support for 15W+ fast charging via USB-C. Security Biometric (Face Unlock or Fingerprint); support for Mobile Device Management (MDM) enrollment (e.g., Knox, Apple Business Manager). |
| 132 | Area Name:- Zone 524 Port 1 gig POE+ Network SwitchL3 Network Switch with specification Port Density 26 x 1G ports (24 PoE+) + 4 x 10G SFP+ Uplinks PoE Power 480W total budget (802.3at PoE+ up to 30W/port) Switching Fabric 132 Gbps non-blocking; Layer 2/Layer 3 Lite (Static/PIM) AV Optimization Pre-configured profiles for Dante, Q-SYS, NDI, and AES67 Multicast IGMP Plus™ for instant out-of-the-box AVoIP setup Form Factor 1 RU, rear-facing ports with reversible rack-mount optionsAcoustics Software-controlled fans for \\"Quiet Mode\\" operation |
| 133 | Area Name:- Zone 6Application Name:- Chanting AmbienceApplication Type:- AmbientType:- Outdoor Pole Mounted SpeakerSupply, installation, testing and commissioning of Full range 4-inch or better IP55 rated surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 70Hz to 19kHz; Power handling of 160 Watt peak; Nominal dispersion of 90°(H) × 80°(V); Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak or better; Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. |
| 134 | Area Name:- Zone 6Application Name:- Chanting AmbienceApplication Type:- AmbientType:- Power Amplifier LMT BasedSITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The Amplifier shall have 600 watts output power asymmetrically distributed across 4 output channels with selectable 4/8ohms, 70/100 Volt or mixed use operation.The amplifier shall have four analog and dante channels ; Frequency Response : 20Hz - 20kHz ; S/N Ratio > 100db and THD < 0.04% at rated output. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals,Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc |
| 135 | Area Name:-Common Central Rack for Zone 1 & Zone 6Type:- Music Server Supply, installation, testing and commissioning of 6-zone, 12-channel Class D streaming amplifier delivering featuring AirPlay 2, Chromecast, Spotify Connect, and Alexa Cast for seamless wireless audio, plus traditional analog/optical inputs, 7-band EQ, and integration with 3rd party control processors for multi zone audio control. It should be capable of work with a NAS (Network Attached Storage) drive. Should be capable of accessing and play local music files stored on a NAS through the VSSL system using compatible streaming apps. |
| 136 | Area Name:-Common Central Rack for Zone 1 & Zone 6Type:- DSLSITC of digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required:The audio DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall have Dante® digital audio networking up to 64 input and 64 output channels, an Ethernet connection for control and programming on an RJ-45 jack, USB audio and 8 digital channels on an RJ-45 jack.The audio DSP shall include configurable signal processing, like signal routing and mixing, equalization, filtering, dynamics, delay, room combining, as well as control, monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante® endpoints.It shall have following specs : Frequency Response-18 Hz to 20 kHz (+0.8 dB/-0.2 dB ref 1 kHz)THD+N < 0.003% @ +4 dBu (A-weighted/20 Hz to 18 kHz)Channel Separation (Crosstalk) < -105 dB at +4 dBu 1 kHz input signalDynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output |
| 137 | Area Name:-Common Central Rack for Zone 1 & Zone 6Type:- Network SwitchL3 Network Switch with specification Port Density 26 x 1G ports (24 PoE+) + 4 x 10G SFP+ Uplinks PoE Power 480W total budget (802.3at PoE+ up to 30W/port) Switching Fabric 132 Gbps non-blocking; Layer 2/Layer 3 Lite (Static/PIM) AV Optimization Pre-configured profiles for Dante, Q-SYS, NDI, and AES67 Multicast IGMP Plus™ for instant out-of-the-box AVoIP setup Form Factor 1 RU, rear-facing ports with reversible rack-mount optionsAcoustics Software-controlled fans for \\"Quiet Mode\\" operation |
| 138 | Area Name:-Common Central Rack for Zone 1 & Zone 6Type:- 2.5 sq. mm speaker CableA 2.5 sq. mm speaker cable (approx. 14 AWG) is a high-conductivity audio cable designed for high-power systems and long-distance runs. It features multiple strands of Oxygen-Free Copper (OFC) to minimize resistance (typically 7.5–8.2 Ω/km) and prevent signal loss. |
| 139 | Area Name:-Common Central Rack for Zone 1 & Zone 6Type:- 2.5 sq. mm outdoor speaker cableA 2.5 sq. mm armoured speaker cable is a high-durability conductor designed for outdoor, underground, or industrial audio installations requiring extreme mechanical protection. Capacity: Rated for 19 Amps with a conductor resistance of ~8.20 Ω/km, ensuring low signal loss over long distances.Build: Consists of PVC or LSZH (Low Smoke Zero Halogen) insulation and a rugged outer sheath. The overall diameter typically ranges from 13.5mm to 15.0mm. |
| 140 | Area Name:-Common Central Rack for Zone 1 & Zone 6Type:- 4.0 sq, mm outdoor speaker cableAn armoured 4 sq. mm speaker cable (approx. 12 AWG) is a heavy-duty, reinforced conductor designed for high-power audio systems and long-distance signal runs in harsh environments. Conductor: High-purity Annealed Tinned Copper (ATC) or Oxygen-Free Copper (OFC), typically featuring a high strand count (~128 strands of 0.20mm) for flexibility.Electrical Specs: Extremely low DC resistance (~4.95 Ω/km) and high current capacity (~26 Amps), ensuring minimal signal loss even over distances exceeding 50 meters.Insulation: Rugged PVC, XLPE, or LSZH (Low Smoke Zero Halogen) jacket that is UV-resistant and moisture-proof. |
| 141 | Technology |
| 142 | Category:- AV/ITInstallation:- GeneralItem:- Audio GuideAudio Guide Devices, With Chargers & Programming |
| 143 | Category:- AV/ITInstallation:- GeneralItem:- VO For Audio GuideVoiceover audios for Audio Guide |
| 144 | Category:- AV/ITInstallation:- GeneralItem:- Ambient VoiceoverVO for Ambience |
| 145 | Maharishi Sandipani Installation |
| 146 | Gurudev Sandipani ( Book Projection ) |
| 147 | Category:- AV/ITInstallation:- Gurudev SandipaniItem:- Projector4000 lumens, 4K PRO-UHD Laser, UST projector Capable of edge-blending and warping for curved surfaces. Throw ratio 0.16 - 0.40. Make: Panasonic / Christie / Epson or Equivalent |
| 148 | Category:- AV/ITInstallation:- Gurudev SandipaniItem:- Projection Mounting RigCustom MS bracket with micro-adjustment for tilt, yaw, and focus; anti- vibration pads included. |
| 149 | Category:- ContentInstallation:- Gurudev SandipaniItem:- Media ServerSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs. |
| 150 | Category:- ContentInstallation:- Gurudev SandipaniItem:- Granth Animation DesignHigh-resolution projection mapping animation simulating page-turn effects, slokas, illustrations, guided narrative on Gurudev Sandipani.Custom creation of mythological visuals, shloka typography, textured parchment effects, animated cues and Voiceovers. Includes script, illustration, motion graphics, VFX. |
| 151 | Category:- ContentInstallation:- Gurudev SandipaniItem:- Mapping, Masking & CalibrationProviding and fixing of 3D Projection mapping software, Playback control System to manage, schedule and control the media servers. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Approved makes: Dataton/Coolux/Pixera/Resolume or equivalent etc. |
| 152 | Narrative Mural |
| 153 | Category:- Software Installation:- Narrative Mural WallItem:- Web-AR Experience DevelopmentEnd-to-end development of a browser-based AR experience triggered by mural. Includes AR scene setup, 3D overlays, animation, hotspot interactions.Platform: 8thWall / Zappar / Niantic Lightship WebAR / custom Three.js. |
| 154 | Category:- Software Installation:- Narrative Mural WallItem:- Marker-based Mural TrackingDevelopment of image tracking tied to mural artwork enabling precise AR alignment in visitor’s mobile camera. |
| 155 | Category:- ContentInstallation:- Narrative Mural WallItem:- 3D & Character ModelsCreation of 3D models (Garg Muni, Ujjain skyline, mythological scenes) optimised for mobile AR rendering. Animation sequences showing city expansion, knowledge dissemination, characters interacting, etc. |
| 156 | The Guru Dakshina |
| 157 | Category:- AV/ITInstallation:- The Guru Dakshina StoryItem:- High-Brightness Laser ProjectorSupply, installation, testing, and commissioning of a high-performance multi- projector system configured for seamless wide-format or curved-surface projection using advanced edge blending and geometric warping. The system shall consist of high-brightness laser projectors with a minimum output of 7,000 ANSI lumens, native WUXGA (1920×1200) or higher resolution, and a minimum contrast ratio of 2,500,000:1, suitable for both flat and complex surfaces under ambient lighting. Projectors shall be equipped with short-throw or fisheye interchangeable lenses (0.4:1 to 0.8:1 throw ratio) to support close- distance wide coverage. Suggested Makes: Panasonic / Epson / Christie or equivalent. |
| 158 | Category:- AV/ITInstallation:- The Guru Dakshina StoryItem:- Custom Projector MountMS fabrication mount with micro-adjustments (tilt, yaw, roll). Concealed design for visitor-facing aesthetics. Powder-coated black. |
| 159 | Category:- AV/ITInstallation:- The Guru Dakshina StoryItem:- Media ServerSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs. |
| 160 | Category:- AV/ITInstallation:- The Guru Dakshina StoryItem:- Mapping, Masking & CalibrationProviding and fixing of 3D Projection mapping software, Playback control System to manage, schedule and control the media servers. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Approved makes: Dataton/Coolux/Pixera/Resolume or equivalent etc. |
| 161 | Category:- ContentInstallation:- The Guru Dakshina StoryItem:- Scene Animation & Projection Mapping Content2D/3D animated visuals including Krishna, Gautami, Maharishi Sandipani, emotional beats, and the return of Madhumangala.Designed specifically to overlay on physical diorama contours. Script for Guru Dakshina story with cultural accuracy and educational clarity. Studio-grade narration recorded by male/female VO artist, including atmospheric SFX. |
| 162 | Category:- LightingInstallation:- The Guru Dakshina StoryItem:- Theatrical Spotlights10-20 W LED warm spotlight for highlighting static portions of diorama without interfering with projection. Beam angle: 15–25°, dimmable. |
| 163 | Category:- LightingInstallation:- The Guru Dakshina StoryItem:- Lighting controlLighting control for fade-in/out synced to narration and projection. |
| 164 | Category:- Special InstallationInstallation:- The Guru Dakshina StoryItem:- Animatronic MechanismIntegration of servo/linear actuators enabling subtle programmed movements such as head turn, hand/arm gesture, gaze shift, breathing effect. Motion control to be smooth, low-noise (<45 dB), and suitable for close-range museum viewing. |
| 165 | 64 Vidyas Tech |
| 166 | Category:- SoftwareInstallation:- 64 VidyasItem:- Design & DevelopmentDesign, development, installation, testing & commissioning of an interactive multi-touch “64 Vidyā Navigator Table”. 43\\"-65\\" commercial touch display, 20 point touch, 4K resolution. |
| 167 | Category:- SoftwareInstallation:- 64 VidyasItem:- Knowledge Map Software EngineInteractive browser for 64 art forms, animations, storytelling UI, info layers, quizzes on transparent screen. |
| 168 | Category:- SoftwareInstallation:- 64 VidyasItem:- Micro-Interactions PackageGesture responses, skill demonstrations, dynamic content cards, audiovisual triggers. |
| 169 | Category:- SoftwareInstallation:- 64 VidyasItem:- Narrative Simulation SoftwareStory-based modules where each Vidyā is explained through animated sequences and scenario-based learning. |
| 170 | Category:- SoftwareInstallation:- 64 VidyasItem:- Gesture Recognition SoftwareEnables visitor to “perform” actions related to Vidyās such as archery stances, dance mudrās, crafting motions, reasoning puzzles. |
| 171 | Category:- SoftwareInstallation:- 64 VidyasItem:- Skill Challenge ScenariosGamified modules showcasing visitor performance, scoring, and comparison with ancient ideal techniques. |
| 172 | Category:- SoftwareInstallation:- 64 VidyasItem:- Scroll Simulation SoftwareVisitors unroll digital scrolls by sliding hands, reveals teachings, mantras, diagrams of Vidyās. |
| 173 | Category:- AV/ITInstallation:- 64 VidyasItem:- Audio-Visual Systems, IT Infrastructure, Integration & CommissioningSupply, installation, configuration, testing and commissioning of the complete AV/IT systems for 64 Vidyaas zone galleries, including displays, projectors, LED walls, interactive touch systems, audio systems, networking hardware, control processors, and content delivery platforms. Scope includes complete cabling, terminations, mounting, programming and handover. |
| 174 | Category:- InteriorsInstallation:- 64 VidyasItem:- Overall Interiors for 64 VidyasComplete execution of interior finishes including wall treatments, ceiling works, illumination, acoustic enhancement, exhibit integration support and all associated interior works required to create an immersive environment as per approved design intent. |
| 175 | Krishna Installation |
| 176 | Category:- AV/ITInstallation:- Krishna InstallationItem:- High-Brightness Laser ProjectorSupply, installation, testing, and commissioning of a high-brightness 30,000- lumens professional laser projector featuring 3-chip DLP technology and WUXGA (1920×1200) resolution, designed for large-venue and mapping applications.The projector delivers 29,000 center lumens, 27,000 ANSI lumens, and 31,000 ISO lumens, with up to 20,000:1 dynamic contrast. or equivalent. |
| 177 | Category:- AV/ITInstallation:- Krishna InstallationItem:- Projector HousingSITC Projection housing enclousure Interface for setup and monitoring of temperature, humidity and status indicators. Power control circuit with PID Management system compitable with the projection housing unit and display unit. Assembly and mounting of projector as per site plan with cables, mounting brackets and tilt/pan arrangement systems for projection layout. |
| 178 | Category:- AV/ITInstallation:- Krishna InstallationItem:- Projector Mount SystemHeavy-duty adjustable mount with vibration isolation pads. Weatherproof installation. |
| 179 | Category:- AV/ITInstallation:- Krishna InstallationItem:- Media ServerSupply, installation, and configuration of a dedicated high-performance media server designed to manage multi-layer projection mapping, interactive content playback, and show control. Server shall be equipped with licensed projection mapping software such as Dataton WATCHOUT, Resolume Arena, or equivalent. Hardware specifications to include minimum Intel Core i9 or AMD Ryzen 9 processor, 32 GB DDR4 RAM (expandable), 1 TB NVMe SSD (OS & software), and additional 2 TB SSD for media storage. Graphics processing to be handled by NVIDIA RTX A2000 or higher, supporting at least 2 simultaneous video outputs (DisplayPort/HDMI/SDI) at 4K resolution. |
| 180 | Category:- AV/ITInstallation:- Krishna InstallationItem:- Networking HardwareSwitches, Cat-6 cables, control wiring for mapping, lighting, laser sync. |
| 181 | Category:- ContentInstallation:- Krishna InstallationItem:- Projection Mapping Visuals3D animations of Krishna’s divine routine, ashram life, teachings, stepwell scenes. Visual Storyboard, Storytelling, 2D 3D animation, Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx, Voiceovers and Music etc for the show. Design and development of pictures, digital illustration, sketch, characters, etc for the show. The Artwork should be created by professional Artist and Illustrator. Programming visual cues matching narration, beats, divine moments. Authenticated storyline capturing daily life, divine routine, teachings. Professional narration, orchestral background score, atmospheric SFX. Duration: 15 Mins |
| 182 | Category:- AV/ITInstallation:- Krishna InstallationItem:- Mapping, Masking & CalibrationProviding and fixing of 3D Projection mapping software, Playback control System to manage, schedule and control the media servers. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Approved makes: Dataton/Coolux/Pixera/Resolume or equivalent etc. |
| 183 | Category:- AV/ITInstallation:- Krishna InstallationItem:- Equipment RackSupplying, Installation, Testing, and commissioning of Equipment Rack 42 U Steel Doors - plain, vented at bottom, fully perforated and dual perforated, Glass Doors - with optional vented side trims for front-to-back air flow.President/ Netrack/ Dynamic/ Rittal/ equivalent make approved by Authority. |
| 184 | Category:- LightingInstallation:- Krishna InstallationItem:- Laser & LightsSITC Laser 20000 mW power Graphics capable - 45kpps @ 8° ILDA Full colour mixing - analog modulation Link multiple units with linking Power, DMX and ILDA, Create custom content, store it inside the laser and play it back in different modes including programming and playback software. |
| 185 | Category:- LightingInstallation:- Krishna InstallationItem:- Laser & LightsSITC Laser housing enclouser with assembly and mounting of projector as per site plan with cables, mounting brackets and tilt/pan arrangement systems for projection layout. |
| 186 | Category:- LightingInstallation:- Krishna InstallationItem:- Laser & LightsSoftware solution to control the laser with all controls and effects. |
| 187 | Category:- LightingInstallation:- Krishna InstallationItem:- Laser & LightsMoving Head with Rated power: 330-400W@220V, Light angle: 2 °, Input voltage: AC100-250V 50/60Hz Light source specifications: 280W high CRI lamp, Colour temperature: 8000K, Colour plate: a colour wheel, 13 is colour + white, half color effect & DMX Control. |
| 188 | Category:- LightingInstallation:- Krishna InstallationItem:- Laser & LightsWeather proof dome housing for beam lights of suitable size with heat dissipation unit and acrylic covering to pass the beam. |
| 189 | 12 Large Sculptures |
| 190 | Category:- LightingInstallation:- 12 Large SculpturesItem:- Lighting with Programming |
| 191 | Sensory Kiosk |
| 192 | Category:- AV/ITInstallation:- Sensory KioskItem:- Hand Hover SensorsMulti-zone IR or Time-of-Flight sensors for tracking hand distance (5-25 cm) above the digital scroll. Make: Ultraleap/Optex/Benewake or equivalent. |
| 193 | Category:- SoftwareInstallation:- Sensory KioskItem:- Gesture ControllerEmbedded microcontroller interpreting gestures. |
| 194 | Category:- AV/ITInstallation:- Sensory KioskItem:- 75\\" Commercial DisplayFull HD/4K display, 24/7 rated, embedded signage OS optional, high-brightness 500 nits. Make: Samsung/LG/BenQ |
| 195 | Category:- AV/ITInstallation:- Sensory KioskItem:- Display Mounting SystemHeavy-duty plate and adjustable frame for kiosk integration. |
| 196 | Category:- AV/ITInstallation:- Sensory KioskItem:- Media ServerSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs. |
| 197 | Category:- SoftwareInstallation:- Sensory KioskItem:- Control Software DevelopmentCustom control scripts linking gestures. |
| 198 | Category:- ContentInstallation:- Sensory KioskItem:- Arrow-Making Craft Animation2D/3D visualisation: selection of wood, carving, shaft straightening, feather fletching, arrow-head forging.Segmented scroll zones responding to hand hover (reveal text, highlight step, animate). Clear prompts, hover-based selection, animated icons.Layered narration + subtle ambient sounds (wood scraping, forging, polishing). |
| 199 | Jyotish Shastra |
| 200 | Category:-AV/ITInstallation:- Jyotish ShastraItem:- LED WallSupply, installation, testing and commissioning of a high-resolution indoor LED Video Wall with P1.9 pixel pitch, suitable for close-range museum viewing and immersive storytelling applications. LED wall must deliver seamless display, high contrast, wide viewing angle, and extended operational reliability for continuous use in exhibition environments. |
| 201 | Category:- AV/ITInstallation:- Jyotish ShastraItem:- SwitchNetworking Switch. Make: Netgear AV Line M4250 or equivalent |
| 202 | Category:- AV/ITInstallation:- Jyotish ShastraItem:- Processor4K Prime Pro LED Processor |
| 203 | Category:- AV/ITInstallation:- Jyotish ShastraItem:- Media ServerSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs. |
| 204 | Category:- AV/ITInstallation:- Jyotish ShastraItem:- Touchscreen Kiosk - Chandrama Station32\\" interactive display to explore moon position, phases, and mind-body connection. |
| 205 | Category:- SoftwareInstallation:- Jyotish ShastraItem:- Planetary Motion SoftwareMotion-simulation UI where visitors rotate celestial bodies to see orbit effects.Explains ancient cosmic principles (e.g., Rashi, Nakshatra cycles, Pancha Mahabhutas alignment) with touch/gesture triggers. Unity/Unreal-based visualisation. |
| 206 | Category:- ContentInstallation:- Jyotish ShastraItem:- Planetary Motion Animations2D/3D scientific animations showing orbital paths, retrograde motion, day- night cycles. Explainer visualisation on lunar influence on emotions and vitality. Interactive content explaining cosmic balance, Panchang, Nakshatra system. Culturally aligned to Jyotish Shastra. |
| 207 | Category:- Special InstallationInstallation:- Jyotish ShastraItem:- Suspended Planets on WinchesDesign, engineering, fabrication, installation, testing and commissioning of a Kinetic Planet System consisting of ten (10) suspended planetary models, each independently controllable using motorized winch mechanisms to simulate orbital movement and astronomical motion. |
| 208 | Category:- Special InstallationInstallation:- Jyotish ShastraItem:- Rigging & Suspension SystemStainless steel cables, swivels, safety bonds, cable clamps, pulleys, and overhead track layout. Ceiling-mounted MS structure with load-bearing certification. |
| 209 | Category:- Special InstallationInstallation:- Jyotish ShastraItem:- Motion Control SystemCentralized controller capable of managing 10 winches independently or in grouped choreography. DMX/Art-Net/Ethernet control, programmable motion curves, planetary motion presets, synchronization with projection/LED content. |
| 210 | Category:- InteriorsInstallation:- Jyotish ShastraItem:- Wall fabrication with LED MountBlack/dark gradient skin panels with vinyl cosmic print or coated paint finish.MS Frame for LED |
| 211 | Ayurveda & Chikitsa |
| 212 | Category:- AV/ITInstallation:- Ayurveda & ChikitsaItem:- UST Projector4000 lumens, 4K PRO-UHD Laser, UST projector Capable of edge-blending and warping for curved surfaces. Throw ratio 0.16 - 0.40. Make: Panasonic / Christie / Epson or Equivalent |
| 213 | Category:- AV/ITInstallation:- Ayurveda & ChikitsaItem:- Ceiling/Floating MountsAdjustable projector mounts for alignment & keystone-free projection. |
| 214 | Category:- AV/ITInstallation:- Ayurveda & ChikitsaItem:- Media ServerSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs. |
| 215 | Category:- AV/ITInstallation:- Ayurveda & ChikitsaItem:- Mapping, Masking & CalibrationProviding and fixing of 3D Projection mapping software, Playback control System to manage, schedule and control the media servers. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Approved makes: Dataton/Coolux/Pixera/Resolume or equivalent etc. |
| 216 | Category:- SoftwareInstallation:- Ayurveda & ChikitsaItem:- RFID Tags for ObjectsPassive RFID tags embedded in objects (herbs, gems, instruments, vials).Unique ID per object. |
| 217 | Category:- SoftwareInstallation:- Ayurveda & ChikitsaItem:- RFID Readers under PodsShort-range readers installed beneath table surface; detect placed objects instantly. |
| 218 | Category:- SoftwareInstallation:- Ayurveda & ChikitsaItem:- Microcontroller HubArduino/STM32/ESP32-based I/O controller reading sensor logic and sending triggers to server. Custom programming included. |
| 219 | Category:- ContentInstallation:- Ayurveda & ChikitsaItem:- Content DevelopmentInteractive Content Development for the Zone |
| 220 | Digital Tactile Table |
| 221 | Category:- AV/ITInstallation:- Digital Tactile TableItem:- Commercial Touch Display86\\" Stretch Display with Touch panel, 4K UHD, 24/7 rated. >400 nitsbrightness. LG / Samsung / ViewSonic. |
| 222 | Category:- AV/ITInstallation:- Digital Tactile TableItem:- High-Performance Mini PCExtreme i7 12th gen, 32 GB RAM, 1TB SSD, Nvidia RTX 5060 GPU |
| 223 | Category:- ContentInstallation:- Digital Tactile TableItem:- 64 Art FormHigh-quality illustrated/animated representations of historic art forms (teaching, magic, metallurgy, gem crafting, strategy, problem-solving, combat sciences, etc.). Short animations explaining each art form’s key techniques. |
| 224 | Category:- SoftwareInstallation:- Digital Tactile TableItem:- Application EngineBuilt using Unity/Unreal/HTML5 for smooth touch interactivity. Multi-touchoptimized. |
| 225 | Category:- Control & AutomationInstallation:- GeneralItem:- Control & AutomationDesign, supply, installation, programming, testing and commissioning of a fully integrated Museum Control & Automation System covering all AV equipment, lighting systems, interactive exhibits, kinetic installations, show control servers, environmental sensors, and gallery-wide power sequencing.System to allow centralized, reliable, operator-friendly control of the entire museum experience. |
| 226 | Furniture |
| 227 | Providing & installation of Wardrobe with 2 doors, black-brown, 79x176 cm (31 1/8x69 1/4 \\") |
| 228 | Providing & installation of Cabinet with doors, dark grey indoor/outdoor, 80x44x182 cm (31 1/2x17 3/8x71 5/8 \\") |
| 229 | Providing & installation of Room darkening curtains, 1 pair, yellow-beige/with heading tape, 135x250 cm (53x98 \\") |
| 230 | Providing & installation of Chair, white/Tibbleby beige-grey |
| 231 | Providing & installation of 1 Seater Sofa in Walnut; Size: H 30 x W 22 x D 22 inches |
| 232 | Providing & installation of 3 Seater Sofa in Walnut; Size: H 30 x W 63 x D 24.5; Seating Height: 18.5 inches |
| 233 | Providing & installation of Solid Wood Coffee Table; Size: H 16 x W 40 x D 20 inches |
| 234 | Providing & installation of Wood Full Length Mirror; Size: H 70 x W 20 x D 1 inches |
| 235 | Providing and installation solid wood and metal chair table outdoor patio seating (set including 4 chair and 1 table) |
| 236 | Providing and installation Children's picnic table, light brown stained |
| 237 | Providing and installation LG 8 Kg 5 Star Smart Inverter Technology Fully Automatic Top Load Washing Machine (T80VBMB4Z, Turbodrum, Auto Prewash, Stainless Steel drum, LED Display, Smart Diagnosis, Middle Black) |
| 238 | Providing and installation 30 Door Durable Metal Mobile Locker for Phones and Valuables, Lockable Storage Grey, 177.8x101.6x101.6x22.86 cm |
| 239 | Providing and installation 30 Door Durable Metal Mobile Locker for Phones and Valuables, Lockable Storage Grey, 177.8x101.6x101.6x22.86 cm |
| 240 | Providing and installation Samsung 189 L, 5 Star, Digital Inverter, Direct-Cool Single Door Refrigerator (RR21D2H259U/HL, Paradise Bloom Blue, Base Stand Drawer) |
| 241 | Providing and installation Table and 4 chairs, green green/green Tibbleby grey-green, 125x74 cm (49 1/4x29 1/8 \\") |
| 242 | Providing and installation Storage comb w sliding glass doors, brown stained oak veneer/clear glass, 245x47x201 cm (96 1/2x18 5/8x78 7/8 \\") |
| 243 | Providing and installation Rose Folding Chair with Writing Pad for Work from Home Cushion and Adjustable Writing Pad 44x39x81 cm |
| 244 | Internal Interior Gurudev Sandipani ( Book Projection ) |
| 245 | Category:- Special InstallationInstallation:- Gurudev SandipaniItem:- Granth Physical Book Structure (Life-sized)Custom-fabricated open book structure of overall size approx. 2400mm (W) x 1800mm (H) x 600mm (D), comprising internal framework in MS square pipe 25x25x1.6mm thick, treated with anti-rust primer and enamel paint, curved book profile formed using CNC-cut 12mm MDF ribs at required intervals, clad with 6mm flexible MDF/bending ply to achieve smooth curvature, surface finished with 6-8mm thick POP/clay modelling to create organic page texture, final finish in matte white PU paint (low reflectance, <10 GU) suitable for projection mapping, includes routed edge detailing to simulate page layers (5-8mm spacing), internal provision for cable routing, and base anchoring with concealed MS plates, complete as per design, including fabrication, installation, and finishing. |
| 246 | Category:- InteriorsInstallation:- Gurudev SandipaniItem:- Back Support & Base PedestalProviding and installing pedestal of size approx. 1200mm (L) x 600mm (W) x 900mm (H), fabricated using MS square pipe 40x40x2mm thick structural frame with anti-rust treatment, clad with 12mm plywood finished in 1.0mm thick laminate (matte finish, Greenlam/Merino or equivalent) on all visible surfaces, internal surfaces painted in black matte enamel, includes provision for concealed cable routing using 25mm dia PVC conduits, ventilation slots for equipment heat dissipation, lockable access shutter, and reinforced top with plywood and vibration isolation pads, complete including fabrication, installation, and integration with book structure. |
| 247 | Category:- InteriorsInstallation:- Gurudev SandipaniItem:- Relief Wall BackdropDesign, fabrication and installation of thematic relief wall panels covering approx. 20 sq.m area (overall wall approx. 8000mm W x 2500mm H), comprising GI/MS framework (25x25mm sections @ 600mm c/c), base cladding in 12mm MDF panels, layered with CNC-routed MDF sheets (6mm-12mm thick) to create relief depth varying from 20mm to 80mm projection, selective elements in FRP (3-5mm thick) for highlighted features, surface prepared with putty, primer, and finished in duco paint (matte/eggshell finish, Asian Paints/ICA equivalent) in approved colour scheme, includes engraved/embossed text (min. 6mm depth), provision for concealed LED strip channels where required, and complete installation as per design and site conditions. |
| 248 | Narrative Mural Wall ( Augmented Reality ) |
| 249 | Category:- InteriorsInstallation:- Narrative Mural WallItem:- Mural WallDesign, fabrication, supply and installation of interactive narrative mural wall of overall size approx. 6000mm (W) x 2400mm (H), comprising structural framework in GI/MS sections 25x25mm @ 600mm c/c grid fixed to wall with anchor fasteners, base paneling in 12mm HDF/MDF boards, layered relief formation using CNC-cut HDF/MDF sheets (6mm-12mm thick) to create narrative elements such as huts, temples, landscapes and figures. selective highlighted elements to be executed in FRP (3-5mm thick moulded panels) for durability and finer detailing, surface finished with putty, sanding and primer, followed by hand-painted artwork using acrylic/emulsion paints with protective matte clear coat (Asian Paints/ICA or equivalent) to achieve mural finish, includes provision for AR integration markers/trigger points embedded within artwork, edge framing with painted borders, and complete installation as per approved design and site conditions. |
| 250 | The Guru Dakshina Story ( Projection mapping on the dioramas ) |
| 251 | Category:- AV/ITInstallation:- The Guru Dakshina StoryItem:- Mapping, Masking & CalibrationProviding and fixing of 3D Projection mapping software, Playback control System to manage, schedule and control the media servers. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Approved makes: Dataton/Coolux/Pixera/Resolume or equivalent etc.. |
| 252 | Category:- Special InstallationInstallation:- The Guru Dakshina StoryItem:- Silicone StatuesDesign, sculpting, fabrication, supply and installation of 04 Nos. hyper-realistic silicone statues representing characters (Maharishi Sandipani, Gautami, Krishna, and child Madhumangala), each of approximate height 1500mm to 1650mm, comprising internal structure in MS armature (12-16mm rods with base plate anchoring), body formed using high-density polyurethane foam sculpting base, finished with platinum-cure silicone skin for realistic texture, includes detailed anatomical sculpting, hand-painted skin tones using silicone pigments, natural finish eyes, custom wigs/hair treatment, and period-accurate costumes using fabric with appropriate draping, hands and facial features to be highly detailed with fine texturing, mounted on concealed base supports integrated into diorama platform, complete including fabrication, finishing, installation and integration with projection environment. |
| 253 | Category:- InteriorsInstallation:- The Guru Dakshina StoryItem:- Background Relief PanelsProviding, fabrication and installation of background relief panels forming diorama backdrop of overall size approx. 10000mm (W) x 2700mm (H), comprising structural framework in GI/MS sections 25x25mm @ 600mm c/c, base paneling in 12mm MDF, with layered CNC-routed MDF sheets (6mm-12mm thick) and selective FRP elements (3-5mm thick) to create engraved/bas-relief detailing with depth variation from 20mm to 75mm projection, surface prepared with putty and primer, finished in matte duco paint (Asian Paints/ICA or equivalent) in approved colour scheme, includes provision for integration with projection surfaces (non-gloss finish), concealed service access where required, and complete installation as per design and site conditions. |
| 254 | 12 Large Sculptures |
| 255 | Category:- SculptureInstallation:- 12 Large SculpturesItem:- SculpturesDesign, modelling, fabrication, finishing, supply and installation of 12 Nos. large-scale sculptures, each of approximate height 3000mm (10 ft) including base, depicting narrative scenes, sculptures to be fabricated using FRP / stone-resin composite (8-12mm thick shell) over internal structural framework in MS pipes (25mm-32mm dia with base plate anchoring), core bulk formed using high-density PU foam / clay modelling for detailing, surface to include fine carving of facial features, garments, ornaments and textures with minimum detailing depth of 3-10mm, finished with stone-textured PU/duco paint (matte finish, Asian Paints/ICA or equivalent) in uniform sandstone tone, each sculpture mounted on integrated circular/rectangular base of approx. 1200mm-1800mm dia/width and 300-450mm height, anchored to floor with chemical fasteners, complete including fabrication, finishing, transportation and installation as per approved design. |
| 256 | Category:- InteriorsInstallation:- 12 Large SculpturesItem:- InteriorsSupply, fabrication and installation of carved wall panels covering approx. 4843 sq.ft area, forming continuous wall cladding on all sides, comprising sub-structure in MS/GI framework (25x25mm sections @ 600mm c/c grid) fixed to wall, base layer in 12mm MDF boards, finished with CNC-routed / engraved panels (12-18mm thick MDF / FRP / stone-resin sheets) with Sanskrit shloka inscriptions and decorative borders having engraving depth of 5-12mm, panels to be installed with seamless joints, groove alignment and concealed fixing system, surface preparation with putty, primer and finished in matte duco / PU paint (sandstone/earth tone), includes edge trims, corner detailing, skirting integration and complete installation as per design and site conditions. |
| 257 | Sensory Kiosk |
| 258 | Category:- InteriorsInstallation:- Sensory KioskItem:- Kiosk Main FrameDesign, fabrication and installation of interactive sensory kiosk main structure of overall size approx. 2200mm (W) x 550mm (D) x 700mm (H), including ergonomic user interface height, structure fabricated using 18mm-25mm BWR grade plywood with internal supports in MS square pipe 25x25mm (1.6mm thick) where required for rigidity, form developed in CNC-cut curved profiles with scroll-inspired geometry, front interaction deck inclined at approx. 15-20 degrees for user accessibility, surface finished in matte laminate (1.0mm thick, Greenlam/Merino or equivalent) and/or duco paint finish in approved colour, includes provision for recessed display mounting (approx. 55”-65” screen opening), touch/interaction surface housing, concealed access panels, internal cable routing channels, and base anchoring, complete including fabrication, finishing and installation. |
| 259 | Category:- InteriorsInstallation:- Sensory KioskItem:- Overall FabricationProviding complete fabrication, assembly and integration of sensory kiosk including structural body, interaction deck and housing for AV components, overall size approx. 2200mm (W) x 900mm (D) x 1000mm (H), includes internal framework in plywood and MS supports, provision for touchscreen/display unit (55”-65”), integration space for sensors (IR/gesture-based), media player housing, ventilation slots for heat dissipation, concealed wiring using PVC conduits, access shutters for maintenance, and finishing in laminate/duco combination, edges rounded with minimum curvature for safety, includes base skirting, levelling supports, and complete installation, testing and handover as per approved design. |
| 260 | Ayurveda & Chikitsa – Pick-and-Place Interactive Zone |
| 261 | Category:- InteriorsInstallation:- Ayurveda & ChikitsaItem:- Counter Fabrication (12-18 ft length)Design, fabrication and installation of interactive counter unit of overall size approx. 4500mm (L) x 750mm (D) x 900mm (H) (length adjustable within 3600mm-5400mm as per site), comprising structural framework in MS square pipe 40x40x2mm thick with anti-rust treatment, clad with 18mm BWR plywood finished in 1.0mm laminate/veneer (matte finish, Greenlam/Merino or equivalent), top surface finished in matte solid colour laminate/PU coating (projection-friendly, low reflectance), includes internal compartments for sensor modules, wiring and access panels, concealed cable routing using PVC conduits, ventilation slots, and provision for integration of interactive pods, edges rounded to minimum R25-R50 radius, complete including fabrication, finishing and installation. |
| 262 | Category:- InteriorsInstallation:- Ayurveda & ChikitsaItem:- Object Pedestals / Placement PodsProviding and installation of 6-10 Nos. recessed placement pods integrated within counter, each of approximate size 200mm x 200mm x 50-75mm depth, fabricated using MDF/solid surface/FRP moulded units with matte finish, each pod to include provision for embedding sensing modules (RFID / IR / weight sensors) with concealed wiring routed through counter body, top surface flush with counter finish, with removable access plate for maintenance, includes cushioning layer where required for object protection, complete including fabrication and integration with counter system. |
| 263 | Category:- InteriorsInstallation:- Ayurveda & ChikitsaItem:- Wall Surface for ProjectionProviding and preparation of projection wall surface of approx. 5000mm (W) x 2700mm (H), including surface levelling with gypsum/POP plaster (minimum 6-8mm thickness), finished to smoothness tolerance suitable for projection, application of primer and minimum 2-3 coats of projection-grade matte paint (neutral white/grey, low sheen <10 GU) such as Screen Goo / Asian Paints equivalent system, includes surface sanding between coats, edge masking, and ensuring uniform reflectance without texture or undulation, complete as per projection requirements and site conditions. |
| 264 | Digital Tactile Table |
| 265 | Category:- InteriorsInstallation:- Digital Tactile TableItem:- Digital Table StructureDesign, fabrication and installation of digital tactile table structure of overall size approx. 1800mm (L) x 900mm (W) x 900mm (H) per unit, constructed using 25mm plywood with internal reinforcement in MS square pipe 25x25mm (1.6mm thick) for load stability, table to include recessed provision for flush-mounted touchscreen display (55”-65”) with supporting frame in powder-coated MS, top surface finished in natural veneer/matte laminate with protective PU coating (low sheen), edges tapered and rounded to minimum R30-R50 radius for ergonomic use, includes internal cable management channels with removable service hatch (min. 450x450mm), cable grommets, ventilation slots and provision for cooling fans (80-120mm dia) for heat dissipation, dust-protected internal compartment for AV equipment, complete including fabrication, finishing and installation. |
| 266 | Category:- InteriorsInstallation:- Digital Tactile TableItem:- FabricationProviding complete fabrication, assembly and integration of 02 Nos. digital tactile tables, including structural body, touchscreen housing, and internal equipment compartments, overall unit size approx. 1800mm (L) x 900mm (W) x 900mm (H) each, includes integration provision for interactive display (55”-65”), media player, and control hardware, concealed wiring using PVC conduits, internal partitions for equipment segregation, ventilation and access panels, finishing in veneer/laminate with matte PU coating, all edges rounded and polished, includes base skirting, levelling feet, anchoring where required, and complete installation, testing and handover as per approved design and site conditions. |
| 267 | Interiors work for Krishna Patheya |
| 268 | Category:- AV & ITInstallation:- Central Projection SystemItem:- Short Throw Laser Projector (7,000 Lumens)Supply, installation, testing & commissioning of ST laser projector, min. 7000 ANSI lumens, WUXGA resolution, 20,000 hrs life, suitable for table projection mapping. Suggested Make: Epson / Christie / Barco or equivalent. |
| 269 | Category:- AV & ITInstallation:- Media PlaybackItem:- High Performance Media ServerSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs.Suggested Make: Dell / HP / Asus or equivalent. |
| 270 | Category:- AV & ITInstallation:-Interactive ControlItem:- 21” Touchscreen Display21-inch industrial capacitive touchscreens, 1920x1080 resolution, anti-glare, wall/table mounted for visitor interaction. Suggested Make: Samsung / ViewSonic / LG or equivalent. |
| 271 | Category:- AV & ITInstallation:- Control SystemItem:-Power AmplifierSupply, installation, testing and commissioning of Class D mixer/amplifier with 48 kHz, 24-bit digital signal processing architecture. The mixer/amplifier shall have two output channels and drive 4-8 Ω low-impedance systems. The output power shall be 50 watts per channel at 4 Ω and 25 watts per channel at 8 Ω. The mixer/amplifier shall have two line-level inputs (two RCA stereo pairs), one Bluetooth wireless signal input, one front-panel mic/line input (one XLR/¼-inch connector), and one paging microphone input (one 4-pin Euroblock connector). The line-level inputs and Bluetooth signal input shall be selectable via a switch on the front panel. The frequency response of the mixer/amplifier shall be 40 Hz to 18 kHz (+0/-3 dB). The THD+N at rated power shall be less than or equal to 0.3%. The channel separation (crosstalk) shall be less than or equal to -60 dBV below rated power at 1 kHz. The dynamic range shall be 88 dB. The nominal input sensitivity shall be -10 dBV for line-level inputs and -58 dBV for paging microphone inputs. Various settings of the mixer/amplifier shall be configurable by a front-panel OLED display and a rotary encoder to navigate the menu/interface and adjust settings.The mixer/amplifier shall include protection from shorted loads and general overheating. The mixer/amplifier shall have venting with a natural-convection cooling system. The mixer/amplifier shall have one port intended for use with analog controllers. The mixer/amplifier shall have a mute connection for use with external dry contacts to mute the loudspeaker outputs and auxiliary output. |
| 272 | Category:- AV & ITInstallation:- Audio SystemItem:- SpeakersSupply and commissioning of high-performance media server with licensed interactive projection software capable of real-time sensor integration. The media server shall be GPU-accelerated (minimum NVIDIA RTX 5060ti 12GB or equivalent), with 64 GB DDR4 RAM, 1 TB NVMe SSD for system operations, and 1 TB SSD RAID-0 array for high-speed media playback. It shall support at least 4x 4K video outputs. |
| 273 | Category:- AV & ITInstallation:- Audio SystemItem:- Dante Input AdapterSupply, installation, testing and commissioning of 2 Channel Dante AVIO Analog Input Adapter with RJ45 and 2 XLR females |
| 274 | Category:- AV & ITInstallation:- Audio SystemItem:-Dante Output AdapterSupply, installation, testing and commissioning of 2 Channel Dante AVIO Analog Output Adapter with RJ45 and 2 XLR females |
| 275 | Category:- AV & ITInstallation:- NetworkingItem:- 24 Port 1 gig POE+ Network SwitchL3 Network Switch with specification Port Density 26 x 1G ports (24 PoE+) + 4 x 10G SFP+ Uplinks PoE Power 480W total budget (802.3at PoE+ up to 30W/port) Switching Fabric 132 Gbps non-blocking, Layer 2/Layer 3 Lite (Static/PIM) AV Optimization Pre-configured profiles for Dante, Q-SYS, NDI, and AES67 Multicast IGMP Plus™ for instant out-of-the-box AVoIP setup Form Factor 1 RU, rear-facing ports with reversible rack-mount optionsAcoustics Software-controlled fans for \\"Quiet Mode\\" operation |
| 276 | Category:- AV & ITInstallation:- AccessoriesItem:- HDMI/Signal Cabling & InterfacesHigh-quality HDMI/DP cables, extenders, converters, and cable management conduits. |
| 277 | Category:- FabricationInstallation:- Diorama BaseItem:- Platform FabricationDesign, fabrication and installation of rectangular diorama platform of overall size approx. 3600mm (L) x 2400mm (W) x 750mm (H), comprising structural framework in MS square pipe 50x50x2mm thick with cross bracing for load-bearing capacity of minimum 250 kg uniformly distributed load, top surface in 18mm BWR plywood with additional 12mm MDF layer for smooth finishing, finished in matte laminate/duco paint (low reflectance, projection-friendly), includes provision for mounting diorama model, recessed channels for wiring, access panels (min. 600x600mm), and base skirting, complete including fabrication, finishing and installation. |
| 278 | Category:- ElectricalInstallation:- ElectricalItem:- Power ProvisioningConcealed wiring, DB, MCBs, power sockets for AV systems. |
| 279 | Category:- FabricationInstallation:- Diorama StructureItem:- Miniature Landscape ModelDesign, modelling, fabrication and installation of high-detail miniature landscape model representing Krishna Patheya circuit (Ujjain, Indore, Dhar), of overall size approx. 3000mm (L) x 1800mm (W) x 600mm (H), terrain developed using high-density PU foam and resin layers, finished with hand-sculpted detailing for topography, includes miniature buildings, temples, pathways and river systems using resin casting, acrylic sheets and 3D printed elements, surface painted with multi-layer acrylic finishes and protective coating, includes provision for embedding LED highlights and projection interaction zones, mounted securely on platform, complete including fabrication, detailing and installation. |
| 280 | Category:- FabricationInstallation:- FigurineItem:- Krishna MiniatureDesign, fabrication and installation of Krishna figurine of approximate height 450mm-600mm, fabricated using resin/FRP casting with internal MS support (where required), finished with high-detail sculpting, hand-painted surface finish with protective coating, integrated with diorama base and aligned for projection interaction, complete including fabrication and installation. |
| 281 | Category:- FabricationInstallation:- EnclosureItem:-Acrylic CoverProviding and installation of clear acrylic enclosure of approx. 3000mm (L) x 1800mm (W) x 900mm (H) (or equivalent segmented dome), fabricated using 10-12mm thick clear acrylic sheets, thermoformed or panel-jointed with polished edges, includes structural support frame in MS/SS sections, provision for hinged/openable access panel, ventilation slots, and concealed fixing, surface to be scratch-resistant and optically clear, complete including fabrication and installation. |
| 282 | Category:- FabricationInstallation:- Kiosk IntegrationItem:- Touchscreen HousingDesign, fabrication and installation of 04 Nos. touchscreen housings integrated along diorama edges, each of approx. 600mm (W) x 450mm (D) x 1200mm (H), fabricated using MS frame (25x25mm) with 12mm plywood cladding, finished in laminate/duco paint, includes provision for 21” touchscreen display mounting, tilt angle of 15-20 degrees, cable routing channels, access panels, and ventilation slots, complete including fabrication, finishing and installation. |
| 283 | Category:-LightingInstallation:-Diorama LightingItem:-DMX Controlled LED FixturesRGBW LED spotlights and strip lights integrated inside diorama for dynamic highlighting. Suggested Make: Philips / Osram / Chauvet or equivalent |
| 284 | Category:-LightingInstallation:-ControlItem:-DMX ControllerDMX512 programmable controller integrated with AV triggers. |
| 285 | Category:-LightingInstallation:-AmbientItem:-Track LightsAdjustable LED track lights (20W) for ambient illumination. |
| 286 | Category:-ContentInstallation:-Projection MappingItem:-3D Projection Mapping ContentRGBW LED spotlights and strip lights integrated inside diorama for dynamic highlighting. Suggested Make: Philips / Osram / Chauvet or equivalent |
| 287 | Category:-ContentInstallation:-Interactive UIItem:-Touchscreen Interface DesignUI/UX design for touchscreen triggers including site selection, language options, animations. |
| 288 | Category:-ContentInstallation:-System IntegrationItem:-AV & Interactive ProgrammingIntegration of touch triggers with projection, lighting, and audio systems. |
| 289 | Operation, management and maintenance of the entire assests/facilities created under this contract for 5 years (Rates to be quoted by Bidder) |
| 290 | Year 1 |
| 291 | Year 2 |
| 292 | Year 3 |
| 293 | Year 4 |
| 294 | Year 5 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
