|
| 1 | DESCRIPTION OF ITEMS |
| 2 | M&L for applying one coat of white wash on plastered or unplasred surfaces of walls of old treated surfaces all as specified including preparation of old plastered surfaces or unplastered white washed walls by brooming down or steel wire brushing , scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified. |
| 3 | All as per item No 1 above but on ceiling surfaces. |
| 4 | M&L for applying two coat of oil bond distemper on old distempered surfaceses of walls of old treated surfaces all as specified including preparation of old surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified. |
| 5 | All as per item No 3 above but on ceiling surfaces. |
| 6 | M&L for applying two coat of cement base paint on old surfaces of walls including preparation of old surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots and efflorescence salts, removing nails and making good complete all as specified. |
| 7 | M&L for applying one coat of plastic emulsion paint incl. prepation of old painted surfaces of walls complete all as specified and directed. |
| 8 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth all as specified. |
| 9 | M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description over 10 cm width or girth all as specified. |
| 10 | M&L french polishing on surfacesof any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler complete all as specified and directed. |
| 11 | M & L for preparation of old decorated surfaces of walls and applying one coat of exterior weather proof acrylic emulsion paint complete all as specified. |
| 12 | M & L for preparation of surfaces and applying one coat of acrylic emulsion paint on ceilings complete all as specified |
| 13 | M&L for writing letters or figures (Block, romman, itallic or Indian) n. exc. 30 cm high, complete all as specified and directed. |
| 14 | M&L for stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed. |
| 15 | Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. |
| 16 | M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of walls, concrete etc finished even and smooth without using extra cement in complete all as specified and directed. |
| 17 | M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of walls, concrete etc finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | All as per item No above but 5 mm thick as on ceiling in C:M(1:4) |
| 19 | M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified. |
| 20 | M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered/putty surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 22 | Preparation of Newly plastered surfaces of walls by brooming down or steel wire brushing and applying two coat of cement base paint on walls including cornices etc complete all as specified and directed. |
| 23 | M&L for preparation of old painted steel roof surfaces of corrugated/ plain steel sheet of any description, over 10cm in width or girth, not otherwise described and applying one coat of antisol roof paint (MB Green) complete all as specified and as directed. |
| 24 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement incl demolition complete all as specified. |
| 25 | M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm , including 10 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4 and incl taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc complete all as specified and as directed . |
| 26 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 including dismantling and prepararing new zinc (or galvanised ) surfaces to receive painting , by coating with mordant solution including washing and cleaning,and preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of antisol roof paint (MB Green) over one coat of red oxide complete all as specified and as directed. |
| 27 | Supply and fixing 0.63 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutter, drip, crumple and straight flashing (length and girth as fixed) with grade of zinc coating 275, corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 including dismantling and prepararing new zinc (or galvanised ) surfaces to receive painting , by coating with mordant solution including washing and cleaning,and preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of antisol roof paint (MB Green) over one coat of red oxide. complete all as specified and as directed |
| 28 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw including dismantling all as specified and directed. |
| 29 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as including dismantling all as specified and directed. |
| 30 | S&F rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 and incl dismantling of existing wrought iron all as specified and directed. |
| 31 | M&L for preparation of new untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer incl prepration complete all as specified and directed. |
| 32 | M&L for preparation of old surface of kerb stones and applying one coat of exterior emulsion paint 1st quality complete all as specified and directed. |
| 33 | M&l in repair for 25 mm thick 2 class Hard wood eves Boarding, fixed with nails /bolting /screwing to roof lable with angle /timber frame work incl dismantling complete all as specified and as directed. |
| 34 | M&L for false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed. |
| 35 | Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 incl demolition of existing masonry complete all as specified and directed . |
| 36 | Material & Labour for Providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar ( 1:6 ) incl demolition complete all as specified and directed. |
| 37 | Material & Labour for 6 to 8 mm dia TMT bars , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 38 | M&L for repair to existing edges of chajjas of any thickness not exc 100mm thick and of area n exc 200 sqcm by domolition/removing loose concrete and rusted reinforcement, welding of new reinfocement bars of similar dia to existing reinfocement ,placing of,RCC (Nominal mix) (1:1.5:3) including necessary formwork,rendering in CM 1:4 etc complete all as specified and directed. (Note; Each arae up to n ecx 300 sqcm shall be measured and paid as one job and the rate quoted by the tenderes are deemed to be included necessary demolition, RCC Reinforcement and formwork etc and nothing extra shall be paid on this account). |
| 39 | M&L for repair to leakage /seepage from 'J' Hooks of CGI /AC/Galvalume roof sheets by replading cup washer and bitumen washer including necessary T & P complete all as specified and directed. |
| 40 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 41 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 42 | S &F PVC (SWR) 75 mm dia vent cowl. |
| 43 | Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. incl taking down complete all as specified and directed |
| 44 | Supply & Fix 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor complete including taking down old GI tubing all as specified and directed. |
| 45 | Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. incl taking down complete all as specified and directed |
| 46 | Supply & Fix 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor and incl taking down complete all as specified and directed. |
| 47 | M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. |
| 48 | M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.. |
| 49 | M&L for applying two coat OBD on newly plastered wall with roller application over a coat of primer applied using manually roller over one coats of wall care putty of 1-1.5mm thicknessand prepared complete all as specified and directed. |
| 50 | M&L for complete removal of existing treatment and applying of two coat OBD on wall with roller application over a coat of primer applied using manually roller application over one coats of wall care putty of 1-1.5mm thickness prepared complete all as specified and directed |
| 51 | M&L for applying two coat OBD on newly plastered ceilling with roller application over a coat of primer applied using manually roller over one coats of wall care putty of 1-1.5mm thickness prepared complete all as specified and directed. |
| 52 | M&L for complete removal of existing treatment and applying of two coat OBD on ceilling with roller application over a coat of primer applied using manually roller over one coats of wall care putty of 1-1.5mm thickness prepared complete all as specified and directed |
| 53 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity n exc 250 Ltrs ,cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm complete all as specified and as directed. |
| 54 | -ditto- as item no 52 above but capacity of tanks exc 250 Ltrs but not exc 500 Ltrs |
| 55 | -ditto- as item 52 above but capacity of tanks exc 500 Ltrs but not exc 1000 Ltrs |
| 56 | -ditto- as item no 52 above but capacity of tanks exc 1000 Ltrs but not exc 2000 Ltrs |
| 57 | S&F in repair Ball valves 15 mm bore high pressure of PTMT (minimum weight- 142 gms) with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe fixed complete all as directed. |
| 58 | S&F in repair Ball valves 20mm bore high pressure of PTMT (minimum weight- 210 gms) with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe fixed complete all as directed. |
| 59 | Supply & Fix in repair PVC cover for water storage tank of capacity exc 200 Ltr but n.exc. 500 Ltr complete all as spd and directed. |
| 60 | Supply & Fix in repair PVC cover for water storage tank of capacity exc 500 Ltr but n.exc. 1000 Ltr complete all as spd and directed. Please Enable Macros to View BoQ information |
