|
| 1 | PART - A INTERIOR FURNISHING WORK : |
| 2 | WOODEN PARTITION - FULL HEIGHT PARTITION - Providing & fixing 65mm thick full height partially solid and partially glazed partition with 12 mm thick BWP plywood on both faces cladded with 1mm thick decorative laminate of approved color & make fixed on 50mm x50mm anti termite treated pine wood frame at 600mmx 600mm c/c both ways rate are included for Providing & fixing 12mm thick Float glass 3’6”to 6’6” height with etching/film as per drawing and the required size 25mm x40mm polished second class teak wood beading to hold the glass,. All exposed wooden surfaces shall be finished shall be finished with laminate / melamine polish and including all necessary screws, cleats, making of grooves as per drawing design, complete in all respect as directed. |
| 3 | LOW HEIGHT PARTITION Providing & fixing 65mm thick low height solid partition with 12 mm thick BWP plywood on both faces cladded with 1mm thick decorative laminate of approved color and fixed on 50mm x 50mm anti termite treated pine wood frame of 600mm x 600mm c/c both ways/ply. 12mm thick glass for 3’-0” to 4’-6” ht. with eatching/film.Rate are included teak wood molding of size 25mm x 40mm on top & side of partition of required shape and all exposed wooden surfaces shall be finished with laminate / polish including all necessary screws, cleats, making of grooves as per drawing design, complete in all respect as directed. |
| 4 | COUNTERS - Providing and fixing a cash counter of overall size 1170 × 686 × 760 mm (L × W × H) fabricated using 18mm thick BWP grade plywood/board, complete as per approved design, drawings and site instructions. The top shall be made of 18mm thick BWP board with full round post-formed edges along the longitudinal sides finished in approved shade flexible laminate, while the remaining surfaces shall be finished with 1.0 mm thick decorative laminate. The sides and back panels shall be constructed using 18mm thick BWP plywood/board and finished with 1.0 mm thick laminate on all exposed surfaces. The counter shall include a drawer unit of size 392 × 450 × 600 mm fabricated from 18mm thick BWP board, boxed on three sides and top, consisting of three drawers for cash storage, with the upper drawer provided with a separate compartment for coins and note slips, heavy-duty telescopic drawer slides, and a lockable arrangement for security. The item shall include all necessary hardware and accessories such as concealed hinges, magnetic catchers, P-locks, stainless steel handles, telescopic channels, keyboard tray provision, cable manager, screws and fittings. All exposed edges shall be finished with PVC edge banding, and the work shall include laminate finishing, polishing, cutting, fixing, transportation, installation and making good, complete in all respects as per drawings and directions of the architect -in-charge. |
| 5 | TABLES: -Bank Manager table: - Providing and fixing an L-shape Manager Table of main size (5'-0\\" × 2'-3\\") with matching (4'x1.5') side return (as per drawing), fabricated using 18mm thick BWP grade plywood/board and finished with 1.0 mm thick decorative laminate (mica) on all exposed surfaces, The table shall comprise a main working top and side return unit made from 18mm BWP board with necessary framing and supports, the top finished with 1.0 mm laminate and PVC edge banding on exposed edges, including provision for modesty panel, wire manager and grommet for electrical/data access. The item shall include a fixed drawer and storage pedestal unit fabricated from 18mm BWP board consisting of drawers and shutter storage as per bank requirements, including a separate lockable drawer for confidential documents, heavy-duty telescopic channels and soft-closing arrangement where required. The work shall also include all hardware and accessories such as drawer locks, central locking system (where applicable), stainless steel handles, concealed hinges, magnetic catchers, keyboard tray provision, cable manager, CPU trolley provision, footrest panel and all necessary fittings as per bank functional requirements. All exposed edges shall be finished with PVC edge banding and visible surfaces with laminate, while internal surfaces shall be finished with balancing laminate and paint, including cutting, fixing, polishing |
| 6 | Manager Tables :- Providing and fixing a Manager Table of size (2.3 ft × 3.4ft), (2.3 ft ×4ft'),(2.3 ft ×4.3ft)ft fabricated using 18mm thick BWP grade plywood/board, finished with 1.0 mm thick decorative laminate on all exposed surfaces, complete as per approved design, drawings and directions of the Engineer-in-charge. The table shall be constructed with 18mm BWP board for the top, sides and modesty panel with necessary framing and supports, with the top finished in 1.0 mm laminate and PVC edge banding on exposed edges, including provision for wire manager and grommet for electrical and data access. The table shall also include a side drawer pedestal made from 18mm BWP board comprising drawers and shutter storage as required, with a lockable drawer provision for documents, heavy-duty telescopic channels and proper locking arrangement. The scope shall include all hardware and accessories such as drawer locks, stainless steel handles, concealed hinges, magnetic catchers, keyboard tray provision, cable manager, CPU trolley provision, screws, fittings and all necessary accessories. All exposed edges shall be finished with PVC edge banding and visible surfaces with laminate, while internal surfaces shall be finished with balancing laminate or paint, including cutting, fixing, polishing, transportation, installation and making good complete in all respects |
| 7 | Cabinates :- Floor low height cabinet:- Providing and fixing a Low Height Storage Cabinet in size of (7.10'x2.5x1.6), fabricated using 18mm thick BWP grade plywood/board and finished with 1.0 mm thick decorative laminate on all external surfaces, complete as per approved design and direction of architect in-charge. The cabinet shall consist of shuttered storage with internal adjustable shelves made from 18mm board and a 12mm plywood back panel with necessary supports, with shutters finished in laminate and provided with proper locking arrangement. The work shall include all required hardware and accessories such as concealed hinges, stainless steel handles, magnetic catchers, shelf supports, tower bolts (where required), locks, screws and fittings. All exposed edges shall be finished with PVC edge banding and internal surfaces with balancing laminate or paint, including cutting, fixing, polishing, transportation, installation and making good complete in all respects |
| 8 | Floor low height cabinet:- Providing and fixing a Low Height Storage Cabinet in size of (2.3'x2.5'x1.6') fabricated using 18mm thick BWP grade plywood/board and finished with 1.0 mm thick decorative laminate on all external surfaces, complete as per approved design and direction of architect in-charge. The cabinet shall consist of shuttered storage with internal adjustable shelves made from 18mm board and a 12mm plywood back panel with necessary supports, with shutters finished in laminate and provided with proper locking arrangement. The work shall include all required hardware and accessories such as concealed hinges, stainless steel handles, magnetic catchers, shelf supports, tower bolts (where required), locks, screws and fittings. All exposed edges shall be finished with PVC edge banding and internal surfaces with balancing laminate or paint, including cutting, fixing, polishing, transportation, installation and making good complete in all respects |
| 9 | Over head cabinet:- Providing and fixing over head Storage Cabinet in size of (7.10'x2.5x1.6'),(7.2'x2.5x1.6') fabricated using 18mm thick BWP grade plywood/board and finished with 1.0 mm thick decorative laminate on all external surfaces, complete as per approved design and direction of the architect in-charge. The cabinet shall consist of shuttered storage with internal adjustable shelves made from 18mm board and a 12mm plywood back panel with necessary supports, with shutters finished in laminate and provided with proper locking arrangement. The work shall include all required hardware and accessories such as concealed hinges, stainless steel handles, magnetic catchers, shelf supports, tower bolts (where required), locks, screws and fittings. All exposed edges shall be finished with PVC edge banding and internal surfaces with balancing laminate or paint, including cutting, fixing, polishing, transportation, installation and making good complete in all respects |
| 10 | SLIP COUNTER: -Providing & fixing a 12mm clear glass top with beveling on slip counter 4’0”x1’0”x4’0” with shelf and pigeon holes to keep slip at top 12”wt. with 19mm block board divisions & leafs of block board below with three internal division in height to create boxes for Cheque Drop Box, Suggestion Box, Complained Box etc. as per design & 1mm thick lamination of approved shade & make (white cedar of greenlam 1702 & 1701). Complete in all respect. |
| 11 | FRONT GLASS ON COUNTERS:- Providing and fixing for all counters glass partition up to 2'-0\\" height made from 10/12 mm thick toughened clear glass with polished edges, complete as per approved design and site instructions. The glass shall be provided with a slip hole / cash transaction opening of required size and shape with machine-polished edges for safe handling. The glass shall be fixed using stainless steel brackets, patch fittings or aluminium channel as required, including necessary drilling, cut-outs, rubber beading and supports to ensure proper alignment and stability.The work shall include all hardware and accessories such as SS fittings, screws, fasteners, packing material and sealant where required, including cutting, fixing, and installation complete in all respects. |
| 12 | FLUSH DOOR :- Providing and fixing solid core flush door shutter of required size made from BWP grade flush door conforming to relevant IS standards, comprising hardwood frame with solid core infill and both faces finished with commercial veneer/laminate as specified, complete as per approved drawings and direction of ARCHITECT r-in-charge. The shutter shall be fixed in a seasoned hardwood / sal wood frame of suitable section, including holdfasts, screws and necessary fittings.The item shall include all required hardware & accessories such as SS butt hinges, mortise lock / cylindrical lock, tower bolt, door stopper, handles, aldrops and all necessary fixtures. Exposed edges shall be finished with lipping/polishing and the shutter surface finished with laminate/paint/polish as specified. |
| 13 | NOTICE BOARD P & F box type lockable boards with blazer cloth backing of felt sheet and 5mm thick clear glass in front with lock etc. complete. (As per architect/bank's approved design ) |
| 14 | GLASS OVER TABLE TOP: Providing and fixing 12 mm glass over tables to complete with grinding polish and round edges. |
| 15 | Executive medium / high / very high back revolving chair Durian / Godrej / Featherlite Make Supplying, and placing in position of medium back chair as per photograph. Size:- (W)625mm X (D)490mm X (H)1135mm. The contemporary chair comprises of luxurious double padding cushion with a central indent that provides lower back support for proper posture and comfort. The central panel in the backrest is neatly stitched with a soft seat cushion finished in the same black premium leatherette. The Chair nestles on a shiny chrome vaulted base with nylon castors. the shiny armrests come adeptly padded for comfort. The product should be from BIFMA and FSC / equivalent approved by engineer, certified company. Complete as per approval and specification under the guidance of Engineer in charge. |
| 16 | GODREJ INTERIO Vurv Chair Mesh Back Supply of Godrej Interio Vurv mid-back ergonomic revolving chair with breathable mesh backrest, fabric upholstered seat cushion, adjustable seat height with pneumatic gas lift, center tilt mechanism with locking, fixed armrests, heavy-duty polypropylene base with castor wheels, |
| 17 | Supply of Featherlite Versa high-back ergonomic revolving chair with breathable mesh backrest, nylon frame, fabric upholstered seat cushion, adjustable lumbar support, height adjustable armrests, pneumatic gas lift seat height adjustment, tilt lock mechanism, nylon base with smooth castor wheels, |
| 18 | Very High Back Godrej chair, Knitted Fabrick approved model (ACE Series ) |
| 19 | Roller Blinds ( Zebra pattern )Providing and fixing Roller blinds of required width & Length quality of approved make fabric made of 100% polyester thickness 0.30mm with Acrylic coating resistance to Cracking & Fraying and treated for dust repellency, UV proof , virtually maintenance free having plastic bottom chain thickness of chain 0.50mm and diameter-3mm, weight per sqm 201g, Degree of opacity 100%, Light frastness 4/6, Plastic with metal bottom weight - 116.20mmX48.30mm and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete as directed.(Double side with roller arrangment ) |
| 20 | Waiting area (E) SS-304 grade stainless steel bench with perforated sheet seat and back, powder coated or chrome finish including center table. |
| 21 | DRESSING MIRROR FOR LOCKER ROOM Providing and fixing dressing table made out of mirror of size 1' 6\\" x 3' 0\\" using 12mm thk. Comm. Ply with 12mm thk. clear Mirror fixed on the wall & tray of size 1'6\\"x1'6\\" with one drawer for cosmetics. As per Design |
| 22 | MIRRORS IN TOILETS Providing and fixing 6mm thk. of approved make clear mirror (First Quality) on 12mm thk. Marine ply. Mirror shall have a frame of 25mm x 25mm steam beach wooden moulding finished in melamine. The rate shall be inclusive all necessary fixtures & fittings. |
| 23 | PIN-UP BOARDS Providing and fixing pinup boards. It consist 12mm thick soft boards of good density to be mounted over 12mm thick comm. ply. The soft board will be covered with a plain fabric (appox Rs.250 /Rmts. of approved colour) from front and edges. Suitable steam beach moulding 25mm x 25mm size to be fixed on all four sides and will be finished in melamine polish. |
| 24 | Note: Only soft bords provided on other than the partitions will be measured and soft board made in the partitions will be the part of the partition measurement (rate) and not consider separately. |
| 25 | KEY BOX Providing and fixing key box of size 1' 6\\"x1' 6\\"x 6\\" with all sides and back with 18mm thick comm. Ply wood and lockable glass shutters in 18mm ply , with 5 mm glass. Necessary hooks to be provided inside the box. All exposed areas and inside to be finished with 1 mm thick laminate of approved shade. The edges of shutter and box to be lipped with steam beach beeding polished with melamine. Rate shall be inclusive of all necessary approved fittings like hinges, locks, hooks etc. and any necessary hardware items. |
| 26 | Cable Tray & Wiring Management System The work includes supply, installation, and fixing of cable management system for CCTV cameras, smoke detectors, and electrical wiring in an area of approximately 1650 sq. ft. The scope consists of providing PVC cable trays/casing-capping (about 60 meters) for general cable routing, GI perforated cable trays of 100 mm width (about 25 meters) for main cable runs, and MS brackets/supports with anchor fasteners for proper mounting on walls or ceilings. The work also includes 25 mm ISI marked PVC conduit pipes (about 70 meters) for drop points to cameras and smoke detectors, along with necessary accessories such as junction boxes, saddles, cable ties, connectors, and fixing hardware for organized cable management. The job covers complete installation, routing, and finishing by skilled labor, ensuring safe and proper arrangement of CCTV, fire alarm, and electrical cables. |
| 27 | Celling light wooden framing Providing and fixing ply framework of required section, securely anchored to RCC slab/walls with dash fasteners and proper alignment for concealed ceiling light formation. Fixing 18mm BWP/Marine grade plywood to create cove/box for concealed LED lighting, including necessary supports, screws, adhesives, and edge finishing.and making necessary cut-outs for lighting fixtures, complete in all respects as per approved drawings and site requirements. |
| 28 | PART - B ELECTRICAL WORK, NETWORKING,FIRE SAFETY,AIRCONDITIONER : |
| 29 | LIGHT & FAN POINTS:-P & F light points, fan points, call bell points, sockets etc. with 2 X 1.5 sq. mm. PVC insulated 1100 V grade FRLS, copper conductor wires and 1.0 sq. mm copper earth wire in concealed / surface using 16 SWG M.S. 20 mm / 25 mm / 32 mm dia conduits accessories such as bends, tees saddles, draw boxes, mounting boxes, innerplates, cover plates, ceiling rose etc. (where ever required) and plug etc. The circuit wiring starting from DB to point control box / switch box using 2 X 2.5 sq. mm and 1.5 sq. mm earthing PVC insulated wiring color code to be provided. Identification ferrules at both end to be provided. (Flexible conduit / elbow NOT allowed). The conduits to be laid in ceiling with proper clamps / wall / floor and felling the chase with cement mortar and finish the same in original form / wooden partition / above false ceiling with proper clamps (Wherever required as per standard specifications)NOTE: All wires & cables shall be FRLS onlyAll material shall be approved make of PNBColor coding must be maintainedNo flexible conduit & elbows will be allowed.Each circuit shall have independent earth wire.Each point shall be earthed.Circuit wiring is to be included in point wiring rates.Each Switch Board should have indicator.Two Emergency down light ( one cashier room and one electric panel room shall be on UPS ) |
| 30 | Providing and fixing of point wiring with above specifications. Onelight point controlled by one switch. |
| 31 | Two point controlled by one switch |
| 32 | Three point controlled by one switch |
| 33 | Wall fan point controlled by one 6 Amp.Modular switch & switch board at SB level and6 Amp. 3 pin socket at desired place. |
| 34 | 6 Amp. Socket with switch at switch board places. |
| 35 | Call bell point with anchor make buzzer |
| 36 | exaust fan point with 16 a switch and 6A socket |
| 37 | mcb box for distribution |
| 38 | main meter panel for electricity supply |
| 39 | POWER POINTS:-Same as item no 1 but wiring for 16 A - 6 pin sockets using 4 sq.mm pvc insulated copper conductor wire with independent 2.5 sq.mm earth wire from DB to 1st Socket &1st socket to 2nd Socket with 2.5sq.mm and 1.5 sq.mm earth wire including providing and fixing of 16 A - 6 pin socket with 16 Amp switch. |
| 40 | power point with 4 m.m copper conductor wires. |
| 41 | power point with 4 m.m copper conductor wires. (Loop Point maximum two point only ) |
| 42 | NETWORKING WORK |
| 43 | Providing and laying Cat 6 cable (Make : Systimax) for data in existing conduits and providing & terminating with RJ-45 (Krone make) with face plates / I/O Ports in suitable modular / MS box from server / EPABX room to individual work stations and terminating other end with RJ-45 connector including numbering with ferule |
| 44 | Supply and installation of patch cord 1 m lenth |
| 45 | Supply and installation of patch cord 2 m lenth |
| 46 | P/F of data/server rack appropriate size with 12 U Rack with 24 - Port Patch Panel (3 Nos. ) and all accessories including all connection as per site requirement. |
| 47 | TELEPHONE WORK : |
| 48 | Wiring with 2pair cable from system room to verious tables in 2mm thick PVC conduit with supplying and fixing of modular type plate with box and RJ-11 sockets to be fixed on wall/partition, etc. The wiring to be laid concealed. (Two module RJ socket used for each circuit. No looping is allowed) |
| 49 | Providing and fixing of telephone tag block (Krone) of following sizes housed in GI box with cover of suitable size including termination 20 pair |
| 50 | Normal Telephone Instrument Supply and fixing of basic push button telephone instrument (desk/wall mount type) having tone/pulse dialing, redial facility, adjustable ringer control, complete with line cord and connection. |
| 51 | Caller ID Display Telephone Instrument Supply and fixing of Caller ID telephone instrument with LCD display, incoming call memory, redial facility, wall/desk mount type complete with connection and testing. |
| 52 | EPABX Telephone System Machine Supply, installation, programming and commissioning of EPABX Intercom System suitable for minimum 16 extensions (expandable), with auto attendant (if required), CLI support, internal intercom facility, call transfer, call hold, music on hold, power adaptor, MDF/Tag block connection, complete with installation and testing. |
| 53 | A.C. POINTS:- A.C Point wiring with 2x6 sqmm +1x2.5 SQ mm cupper conductor from AC DB to ACPOINT in 16 swg GI conduit ac point including supply ing and fixing of metal AC box with 3 pin metal clad top and 32/25 amp SPMCB as per site requirmrnts |
| 54 | LIGHT & FAN FIXTURES :- Philips LED Tube light 18 W/22 w (6500k) WITH POINT AND WIRING |
| 55 | Inverter with Battery Backup System |
| 56 | The work includes supply, installation, testing and commissioning of an inverter with battery backup system suitable for office/bank use. The system consists of one 1.5–2 KVA pure sine wave inverter with overload protection, LED display and automatic changeover, along with two numbers of 12V 150Ah tall tubular inverter batteries (Exide/Luminous/Amaron or equivalent) designed for long backup and heavy-duty performance. The scope also includes a powder-coated MS battery stand suitable for two batteries, as well as battery cables, lugs, connectors and all necessary wiring accessories, complete with installation and commissioning. |
| 57 | EARTH STATIONS |
| 58 | Supplying, laying and terminating of the following tapes/wires with suitable G.I./Copper/Clamps. i) 2x8 SWG copper earth wire in GI conduit inside the Branch. (PIT To UPS ) |
| 59 | Supplying & installation of Pipe in pipe technology GEL Earthing system, Model T - 19 with outer diameter of 50 mm, length 2000mm embedded in the soil with masonry inspection pit along with cover etc. complete in all respect. This work should be got carried out through Bank,s approved vendor and each Earth pit installation test certificate to be submitted after measurement of earth resistance as per the provision in IS3043. (Panel earthing) |
| 60 | Supplying & installation of pipe in pipe technology GEL Earthing system, Model T-39 with outer diameter of 80 mm, length 2000mm embedded in this soil with masonry inspection pit along with cover etc. complete in all respect. This work should be got carried out through Bank's approved vendor and each Earth pi installation test certificate to be submitted after measurement of earth resisitance as per the provision in IS3043.(UPS connection) |
| 61 | Fire Alarm System :- |
| 62 | P/F of pvc insulated copper conductor cable 2x1.5 sq.mm in existing conduit / as required 25mm Dia pvc conduit 2mm thick complete with reqired junction box in recessed / surface system as required. |
| 63 | Supplying, installation, testing and commissioning of manual call box in suitable enclosure with arrangement to raise the alarm when the glass is manually broken complete as required. |
| 64 | Supplying, installation, testing and commissioning of duel tone electronic hooter suitable for wall mounted electronic hooter for complete as required. |
| 65 | Supplying, installation, testing and commissioning of microprocess. base main fire alarm control panel of 4 zone capacity as completewith batteries, battery charger illuminated numeric diagram complete as required. |
| 66 | Supplying, installation, testing and commissioning of maintenance free intelligent ionization type smoke detector as required. |
| 67 | Supplying, installation, testing and commissioning of ROR-MF. intelligent type heat detector as required. ( at pantry ) |
| 68 | supply, testing , and commissioning of Response indicator. |
| 69 | Battery 7 AH 12 Volt / as per requirement including all fittings. |
| 70 | FIRE EXTINGUISHERS Supply installation testing & commissioning of FIRE EXTINGUISHERS (make ; Cease Fire / Minimax ) ABC type - 2 Kg |
| 71 | C.C. T.V. Wiring : |
| 72 | Supply and Laying of RG-11 Unarmoured Co-axial video cable (ISI marked) through 25 mm PVC conduit (ISI marked) including cost of the conduit for CCTV system |
| 73 | Supply & Installation of High Quality 4MP/5MP IR Bullet Camera with AI features (Metal Body, Night Vision up to 40m, IP66 Rated, Suitable for Outdoor) |
| 74 | Supply & Installation of poe, giga bite, switch with 8 port, giga bite switch with 16 chanel port, pvc box etc. |
| 75 | 16 Channel DVR/NVR (H.265, 4K Support, HDMI/VGA Output, 2 SATA Support) |
| 76 | 6 TB Surveillance Hard Disk |
| 77 | 32” LED Monitor (Branded) |
| 78 | Supply & Laying of RG-11 Unarmoured Co-axial Video Cable (ISI Marked) through 25mm Heavy Duty PVC Conduit (ISI Marked) including cost of conduit, clamps, bends, junction boxes etc. |
| 79 | 12V 10 Amp Power Supply Unit with Distribution Box |
| 80 | Installation, Testing, Commissioning & Configuration Charges (Complete System) |
| 81 | Backlit Flex Board / Glow Sign Board for bank |
| 82 | Providing and fixing backlit flex sign board of required size made with MS tubular frame structure duly powder coated/rust-proof treated, covered with translucent star flex printed with approved graphics and branding, complete with internal LED backlighting system. The board shall include LED modules/strips with SMPS driver, proper wiring, acrylic diffuser (if required), aluminium composite panel border/boxing and necessary supports for uniform illumination and durability.The work shall include fixing arrangement with clamps/anchor fasteners, electrical connection from nearby point, sealing, testing and commissioning complete as per approved design and site instructions. Please Enable Macros to View BoQ information |
