|
| 1 | P/Laying of Ferrow cement concrete in 1:2:4 cement appd coarse sand and 20mm stone grite and mixing water proofing compound at the rate of 1 kg./ Bag of cement in thickness of 5cm. Avrage including embedding of expended metal jali of 6 gauge iron wire including and fixing over slab including 6mm thick cement plaster in 1:2 cement and c sand mortor finished with floating coate of need cement PWD SOR New Item 2 |
| 2 | Laying of PCC 1:4:8 with cement ,c sand and 40 mm stone ballast in base concrete |
| 3 | Dismentaling of old exisiting damage floor and desposal of refuse |
| 4 | Laying of PCC 1:4:8 with cement ,c sand and 40 mm stone ballast in base concrete |
| 5 | 12mm thick plaster work in 1:4cement and fine sand mortor |
| 6 | Transpotation charge from Mahoba to site |
| 7 | S/F of M.S. squire pipe fram and ply bord top desk and bench combind including cost of welding , proper turning on edge ,painting and top side sunmika finish ,transpotation from work shop to smart class etc as per minimam local market rate . |
| 8 | Bala painting on walls |
| 9 | 12mm thick plaster work in 1:4cement and fine sand mortor |
| 10 | Sand filling |
| 11 | Two set of high frequency modem Wi-Fi speed up to 867 MBPS /5 GHz +300 MBPS /24 GHz , 5 gigabit ports ,4 external eanfennage with access point mode wire less router with LAN Cable connection |
| 12 | Transpotation charge from Mahoba to site |
| 13 | S/F of M.S. squire pipe fram and ply bord top desk and bench combind including cost of welding , proper turning on edge ,painting and top side sunmika finish ,transpotation from work shop to smart class etc as per minimam local market rate . |
| 14 | Laying of PCC 1:4:8 with cement ,sand and 40 mm stone ballast in foundation |
| 15 | Electrification ( Internal+ External ) complete |
| 16 | Earth work in excavation in foundation of column footing |
| 17 | Sand filling |
| 18 | 5cm thick CC flooor in 1:1.5:3 cement c sand and 20mm stone grit in appron |
| 19 | S/F of M.S. Structure |
| 20 | Earth work in filling by cartage of earth from 1.00km by tractor trolly. |
| 21 | 12mm thick plaster work in 1:4cement and fine sand mortor |
| 22 | S/F of G.I. coloured profile sheet 0.60 number at the rate of 17.00kg per 3.30x1.00m sheet approved make (Tata ,Nippon ,etc)(as per minium local market rate) |
| 23 | S/F of 15 mm dia P.V.C. pipe line |
| 24 | S/F of G.I. coloured profile sheet 0.60 number at the rate of 17.00kg per 3.30x1.00m sheet approved make (Tata ,Nippon ,etc)(as per minium local market rate) |
| 25 | S/F of 15 mm dia P.V.C. pipe line |
| 26 | S/F of low density P.V. C Tank 500 Ltr. |
| 27 | S/F of 25 mm dia brass gate valve |
| 28 | S/F of 25 mm dia pvcpipe line |
| 29 | Misc. Items of pipe line such as socket , tee,union, elbow, niples ,angle cock, gate valve , pvc ball float valve with bross rod and other items |
| 30 | S/F of R.O./ Purifier with all fitting |
| 31 | S/F of 60/80 Liter capacity water coolar standerd make ,such as Volas,Bluestar , Usha equivallent make |
| 32 | S/F of stablizer 1 K.W. capacity |
| 33 | Electrical fitting for water coolar , R.O., |
| 34 | Installation of water coolar , R.O. , |
| 35 | S/F of 1 H.P. monoblock lifting pump |
| 36 | Plumbering charge |
| 37 | Painting work in M.S. strucure |
| 38 | P/F Powder coated Aluminium work for windows for frame and sliding pannel com. In all respect DSR Code No 21.1.1.2 |
| 39 | P/F 5 mm thick Glazing in Aluminium window shutter with EPDM rubber /Neoprene gasket com.in all respect DSR Code No 21.3.2 |
| 40 | P/F of ISI marked Flush door shutters decorative type with ISI marked stainless steel butt hinges DSR Code No 9.20.1 |
| 41 | Smart class room with digital cotent and learning management system (L.M.S.)As per quotation |
| 42 | imformation board + photography |
| 43 | Supply of 3 KW Solar Power Plant (off grid) with module mounting structure , 48V, 240AH Battery (MNRE Approved) backup , 4.0 KVA Invertor etc …. Complete (5 year warranty) |
| 44 | Installation Charges |
| 45 | Boring of 25cm dia piles of double under reamed of 50cm dia of bulb and 3.50 meter depth in B.C. Soil with hand operated auger machine (Rates are as per PWD SOR) |
| 46 | R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion 1:1.5:3 in piles grade beam excluding supply of reinforcement and also including supply of all material labour T&P centering and shuttering etc.DSR Code No 5.1.2 |
| 47 | R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion 1:1.5:3 in columns excluding supply of reinforcement and also including supply of all material labour T&P centering and shuttering etc.DSR Code No 5.2.2 |
| 48 | DPC in 4 cm thick in 1:2:4 cement csand and 20mm stone grit and apped water proofing compound .DSR Code 4.10 |
| 49 | M-150 brickwork in 1:4 cement and fine sand mortor including cost of material , labour, T&P complete in super structure DSR Code No 6.3.1+6.7 |
| 50 | M.S. Work in R.C.C. Incluing supply of steel its wastage and hooks and authorised overlap |
| 51 | Earth work in filling by cartage of earth from 1.00km by tractor trolly. |
| 52 | Earth work in excavation in foundation DSR Code No 2.6.1 |
| 53 | Sand filling in foundation DSR Code No 2.27 |
| 54 | Laying of PCC in 1:4:8 DSR Code No 4.1.8 |
| 55 | RCC work in 1:1.5:3 cement , coarse sand and 20 mm stone grit in gate columns DSR Code No 5.2.2 |
| 56 | S/F of M.S. gate DSR Code No 10.16.1 |
| 57 | 12mm thick plaster work in 1:4cement and fine sand mortor |
| 58 | P/ applying white cemnent based putty of avg. thickness 1mm of appd. Brand over the plastered wall surface to prepare to surface even and smooth DSR Code No 10.80 |
| 59 | finishing wall with tex tured exterior paint of required shade ( two or more coad applied ) @3.28 lt /10sqm over and including priming coat at the @2.20kg per10sqm |
| 60 | Painting or varnishing three coat over one priming coat on newly metal surface |
| 61 | Fixing of information board & photography Please Enable Macros to View BoQ information |
