|
| 1 | Const. /Development of Park in Herahedi Village under Municipal Council Pataudi Mandi. |
| 2 | SIT `N` SNICKER SWING - Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser- cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. |
| 3 | GONDOLA SWING Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60 – 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser-cut withanti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playgroundstructures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. 130000Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RALshades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team withadherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 4 | ARM REVOLVE ASSISTMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar in bendingdesign. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wallthickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel. Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations. 36000Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity indual color combination. Safety Instructions and Exercise chart on machine - start and finish position chart stick on5mm |
| 5 | MERRY-GO-ADAPTMain Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum40 mm outer diameter (OD), 2.0–3.0 mm thickness Surface Finish Zinc primer plus outdoor- grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fullyautomatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser-cut withanti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface FinishZinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending withfully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playgroundstructures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposedbolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60–80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RALshades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe)ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team withadherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 6 | Const. /Development of Park in Herahedi Village under Municipal Council Pataudi Mandi. |
| 7 | Const. /Development of Park in Herahedi Village under Municipal Council Pataudi Mandi. Please Enable Macros to View BoQ information |
