|
| 1 | Running expenditure ‘of pump houses which includes complete operation of pumpmotor, maintenance of Iog-books as directed by ‘Engineer-in-charge, general upkeeping of premises, security arrangements, Reguiar ‘ chemical dosing in CWR, cleaning and desilting of SR/CWR/SUMP once every six months, daily valve operation under the Campus of pump house and all other works as mentioned in scope of work in tender document for per pump house per month. (excluding repairing of pumping machinery etc.) |
| 2 | Upto 100 HP |
| 3 | Repairs / rewinding of centrifugal pump sets including cost of material components & accessories required to repair pumpsets, starters, meters etc. of electric panels, deinstallation and re-installation of pumpsets complete in all respect. Operated load of Centrifugal Pumpstes (HP) |
| 4 | 6 HP TO 12.5 HP |
| 5 | 13 HP TO 20 HP |
| 6 | Daily/periodical operation of valves at suppIy times for specified by department per sluice valve per month. (Valve rod and cap to be arranged by contractor). |
| 7 | 80-300mm |
| 8 | Maintenance of pipelines irrespective of size and material which includes repairing of bursts and leakages, pollution control, survey and removal of choking, disconnection of illegal connections, collection and recording minimum 10 nos. residual chlorine samples during daily supply timings, interconnections and all works related to pipeline network in existing distribution/ rising main pipelines of all sizes by digging out suitable size of pit in soft and loose soil/ hard soil including cutting of black top, WBM and CC top of road of any size at work site. This will also include cutting of pipe ends, fixing of pipe piece with jjointing material to make repair leak proof and refilling of pit by excavated sand by ramming it at sides of pipes and upto ground level. For entire job, contractor will use their own T and P. Contractor with his own resources shall arrange dewatering, JCB and tractor compressor if any and restore any amenity at his own cost damaged while performing the work in this item. The work includes daily patrolling and repair the leakages within stipulated time and complete maintenance of pipeline network of rising and distribution pipeline network within the scope of work for per km pipeline per month. Jointing material shall be provided by the department. Minimum labour for a following kms pipelines to be deployed: |
| 9 | 51 km to 100 km - 2 fitter-II and 2 beldar |
| 10 | Providing, installation, testing and commissioning of submersible dewatering pump set conforming to relevant IS codes and as per scope of work and Technical Specifications, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, impeller, pump and motor body. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard. The pump set shall be suitable for direct coupling, with suitable suction strainer etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. |
| 11 | 2.2 KW (3.0 HP) |
| 12 | Maintenance of tubewells which includes round the clock monitoring of tubewells of all sizes, complete repairs/ rewinding of submersible pumpsets including cost of material components required to repair pumpsets, starters, meters etc. of electric panel of tube wells lowering and unlowering of pumpsets complete in all respect, maintenance of log-books and history sheet as directed by Engineer-in-charge for tubewell per month. |
| 13 | 6.0 HP TO 7.5 HP |
| 14 | 8.0 HP TO 10.0 HP |
| 15 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. |
| 16 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) |
| 17 | \\"STAR DELTA STARTER 15.0 KW (20.0 HP) : For 2 motors (1 W+ 1S) I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)\\" Please Enable Macros to View BoQ information |
