|
| 1 | Providing and Laying cement concrete 1:6:12(1cement,6 fine sand, 12 graded aggregate 40mm. Nominal size) including supply of all materiales, labour and T&P etc.required for proper comoletion of the work and curing complete also including cost of from work in foundation & floors.as si no.- 273 |
| 2 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 3 | M-150 class Brickwork in 1:4 cement & C-sand mortar in foundation & plinth including supply of all material labour T&P complete job SI.No. 307 |
| 4 | 12mm thick plaster with cement mortar in proportin of 1:4 cement &Fine sand of 1.25 FM |
| 5 | Laying of 80 mm thick pre moulded inter locking paver tiles over 20cm compected GSB including 4 cm thick coarse sand bed over prepared surface including all labour T&P etc required for proper completion of work |
| 6 | Providing and laying vitrified tiles in different size (thickness to be specified) by the manufacture) with water absorpition less than 0.08% and conforming to IS 15622 of approved brand&manufacture in all colours and shade in skirting riser of steps laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6mm thicknes including grouting of joints (payment for grouting of joints to be made separately) DSR 11 47 2 2021 Size of Tile 600x600mm |
| 7 | RCC work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportionof 1:1.5:3 for the RCC raft foundeation and ballast excluding supply of all reainforcement and its binding supply of all reinforcement and its binding the same with 24 B.W.G.GI binding wire and including necessary centering and shuttering etc and also including supply of all matrial labour and T&P Etc required for proper completion of thge work. (PWD -289) (For Drain) |
| 8 | Mild steel or iron in plain work shuch as reainforced concrete or reinforcred brick work (when not included in over all rates) wrougth to requiredshape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks (PWD- 504) |
| 9 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (DSR - 13.47.1) |
| 10 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plasterd wall surface even and smooth surface (DSR-13.80). |
| 11 | Providing and placing on terrace (at all floorlevels)polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary hoies for inlet outletand over flow ppes but without fittings and base Supportfor tank.DSR 18 48 |
| 12 | Providing and fixing white vitreous china pedestal typewater closet (European type W.. pan) with seat and lid,10 litre low level white PV.C. flushing cistern, includingflush pipe. with manually controlled device (handlelever). conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: DSR 17.2WC. pan with ISI marked white solid plastic seat and lidDSR 17.2.1Total |
| 13 | Providing and fixing C.P brass Long body bib cock ofapproved quality conforming to IIS standards andweighing not less than 690 gms. a) 15 mm nominal borelDSR 18.51.1 |
| 14 | Mild steel or iron in plain work in heavey sizes such astruses as built up gates, door, frames, record racks, roofwork, gates etc wrought to required form including23 drillng holes reveting or welding where necessary andalso includes supply of steel, bolts, nuts etc & fixingrequired proper completion of the work (PWD-503) |
| 15 | GST 18% (Notice- SEE manual estimate ) Please Enable Macros to View BoQ information |
