|
| 1 | Dismantling CGI (Corrugated, Semi corrugated or plain etc.) in roof coverings complete all as specified & directed. |
| 2 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in roof coverings complete all as specified & directed. |
| 3 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed by Engr-in-Charge |
| 4 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA (coating grade of AZ 150 GSM) as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified. |
| 5 | M&L applying 2 coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed. |
| 6 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA (coating grade of AZ 150 GSM) as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified. |
| 7 | Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles |
| 8 | M&L brick work with fly ash bricks straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 9 | S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 10 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S & F rates, include for anodised aluminium hard ware as indicated, screws, pvc rawl plug, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames. |
| 11 | Taking down Chowkhats or frames n.exc 1.5 sqm each (without taking off shutters from the frame) |
| 12 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. |
| 13 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement |
| 14 | M& L for three coat of white washing of required shade and colour complete, as per manufacturer's specification. |
| 15 | M & L for finishing walls with two coat of cement base paint over a coat of alkali primer after complete removal of existing surfaces of wall complete all as specified and as directed. |
| 16 | M&L for filling of gap between ridge and galvalume sheet with PUF 25 mm thick complete all as specified and directed |
| 17 | M&L roof trusses (framed), trussed, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A etc complete all as specified and as directed. |
| 18 | M & L for RCC M-25 (Design Mix) (using 20 mm graded stone agregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 19 | Use & waste sides and soffits of floor or roof beams, beam haunchings, lintels, cantilevers including supports, overhangs, etc. also splays between floors and beams, etc.of rough surfaces of concrete. |
| 20 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete |
| 21 | M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete |
| 22 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 23 | M & L of machine cut kota stone slab flooring 20-25mm thick including 15 mm thick cement screed bed in cement mortar 1:6, laid and bjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 24 | M & L of machine cutt kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid including 10 mm thick cement plastering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 25 | Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided complete all as specified and as directed. |
| 26 | M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified |
| 27 | M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for machine pressed cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 29 | Dismantling of RCC posts or struts of any section, including taking out embedded portion in normal ground and making good disturbed ground. |
| 30 | Dismantling of RCC posts or struts of any section, including taking out embedded portion in concrete, brick work, masonry, etc and making good disturbed ground |
| 31 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 32 | M&L framed work posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed. |
| 33 | M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed. |
| 34 | S & F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed |
| 35 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation all as specified and directed. |
| 36 | Dismantling of old rusted/ unsv/ broken barbed wire of any decription and in any condition complete all as specified and as directed. |
| 37 | M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed. |
| 38 | M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 39 | M & L for finishing with acrylic smooth exterior paint of required shade with two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete including preparation of new plastered surfaces of wall. |
| 40 | Taking down carefully, old unserviceable aluminium point wiring (light, fan, socket, bell, buzzer or power) complete including unserviceable fittings such as switch, socket, ceiling rose, lamp holder, light fittings, bakelite sheet, terminal box, etc. and making good to disturbed surfaces of wall/floor and ceiling etc. and removal, complete all as specified and as directed by Engineer – In – Charge Note:- Existing CFL/FTL fittings are not to be removed and rates are inclusive of taking down & refixing of existing CFL/FTL fitting at any location as directed by Engg-In-Charge. Disturbed surfaces shall be made good by plastering and applying two coats of white wash or OBD to match the existing surface finishes. |
| 41 | Taking down carefully by unscrewing from DB box MCB SP/SPN/TPN of sizes & any capacity all as directed. |
| 42 | Taking down carefully by sub main wiring of any size all as directed. |
| 43 | Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories but using existing sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly all as directed and as specified for the following :- NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc. |
| 44 | (a). One light/fan point controlled by one switch |
| 45 | (b). One 3 pin socket outlet 5 Amp on same board. |
| 46 | All per Srl item No. 43 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board. |
| 47 | Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. |
| 48 | S &F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed. |
| 49 | S &F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed. |
| 50 | S&F socket out let 3 pin 5 amp multipurpose flash type. |
| 51 | S&F socket out let 3 pin 5/15 Amp multipurpose, flush type 240 volt complete. |
| 52 | S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete. |
| 53 | S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed. |
| 54 | S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed. |
| 55 | Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted. |
| 56 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete. with suitable size all as specified and as directed. |
| 57 | Supply and fixing LED street light fitting 35 Watt230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete. |
| 58 | Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 3.15mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I). |
| 59 | S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified . Please Enable Macros to View BoQ information |
