|
| 1 | Drain/Slip Clearance in soil mixed with moorum/kankar/shingle/boulder disposal lead upto 50 m and lift 1.5 m |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil : |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 5 | Providing and laying of wire mesh crate including cost of wire crates and filling of stones including carriage complete job (LMR) |
| 6 | Removal Of individual Boulder/Slash JCB (LMR) |
| 7 | Disposal of material by engaging Tractor/Trolly including loading transporting to dumping yard proposal of contractor and unloading complete job and as per direction of Engineer in Incharge (LMR) |
| 8 | Providing and laying RBM Filling in pot Holes and damaged surface including compaction all lead lift and carriage complete Job (LMR) |
| 9 | Clearing snow (with frost) from Roads, manually pick and shovels snow depth upto 150 mm |
| 10 | Clearing Snow (without frost) from Roads, mechanically: Snow depth upto 150 mm |
| 11 | Clearing Snow (without frost) from Roads, mechanically: Snow depth over 150 mm but upto 250mm |
| 12 | Clearing Snow (without frost) from Roads, mechanically: Snow depth over 250 mm but upto 350mm |
| 13 | Clearing Snow (without frost) from Roads, mechanically: Snow depth over 550 mm but upto 650mm |
| 14 | Galla cutting in compressed snow 150 mm deep and 4 m wide |
| 15 | White washing with lime to give an even shade : Old work (two or more coats) |
| 16 | Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. Please Enable Macros to View BoQ information |
