|
| 1 | Dismantling, clearing away and carefully stacking materials useful for reuse for old Brick masonry walls in cement mortar under 3m height, complete complying with standard specification and as directed by the departmental officers. |
| 2 | Dismantling, clearing away and carefully stacking materials useful for Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs., complete complying with standard specification and as directed by the departmental officers. |
| 3 | Dismantling, Doors & windows including removal of frames, hinges and fastenings, complete complying with standard specification and as directed by the departmental officers. |
| 4 | Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. In Cement Mortar 1:6 |
| 6 | In First Floor |
| 7 | In Second Floor |
| 8 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 15mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 9 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 10 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 11 | Cleaning the Light Jungle etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Labour charges for fixing windows and ventilators along with frames in position etc., complete complying with standard specification and as directed by the departmental officers. |
| 13 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm |
| 14 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm |
| 15 | Supply and installation of 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance etc. complying to standard specification. |
| 16 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. |
| 17 | Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. |
| 18 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. |
| 19 | Hire charges for providing weld mesh partition inside the counting hall. The verticle and horizantal frames should be MS Hollow Square Section 40x40x3mm and the MS flat of size 4x2x0.30mm as stiffners. The size of the weld mesh should be 6.00cm x 2.60mm for Counting Hall, Postal ballot and VV Pad including labour charges, loading, unloading charges, transportation and removing after the counting is over. (15 days), complete complying with standard specification and as directed by the departmental officers. |
| 20 | Hire charges for providing Wooden Dias arrangements of size 8.00 x 2.10 x 0.30m. The made of dias arragements in using CW vertical support of 0.10m x 0.30m and bootom & top alround horizontal support 0.10 x 0.075m. CW scantling. The top 18mm thick MDF Board closing the using best qulaity of MDF board and using fevicol, nails, Screws, bolt nut including cost of fixing labour charges, Conveyance charges, as directed by the Departmental Officers .(15 days) |
| 21 | Hire charges for providing Wooden table of size 0.75x0.45m. The made of table arragements in using steel hollow pipe of 1\\" vertical support and bottom & top alround horizontal support. The top 18mm thick MDF Board closing the using best qulaity of MDF board and using fevicol, nails, Screws, bolt nut including cost of fixing labour charges, Conveyance charges, complete complying with standard specification and as directed by the departmental officers. |
| 22 | Hire charges for providing Wooden table of size 1.20x0.60m. The made of table arragements in using steel hollow pipe of 2\\" vertical support and bottom & top alround horizontal support. The top 18mm thick MDF Board closing the using best qulaity of MDF board and using fevicol, nails, Screws, bolt nut including cost of fixing labour charges, Conveyance charges, complete complying with standard specification and as directed by the departmental officers. |
| 23 | Hire charges for providing Wooden table of size3.30x0.75m. The made of table arragements in using steel hollow pipe of 2\\" vertical support and bottom & top alround horizontal support. The top 18mm thick MDF Board closing the using best qulaity of MDF board and using fevicol, nails, Screws, bolt nut including cost of fixing labour charges, Conveyance charges, complete complying with standard specification and as directed by the departmental officers. |
| 24 | Hire charges for providing Stainless steel table of size 1.20mx0.45m arrangements in the counting centers and common areas incluning loading, unloading, shifting one place to anothor place and rearranging the tables and chairs.(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 25 | Hire charges for providing Plastic chairs arrangements in the counting centers and common areas incluning loading, unloading, shifting one place to anothor place and rearranging the tables and chairs.(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 26 | Hire charges for providing GI sheet partition verandah and other openings using 13CMX10CM casurina poles for verticle support and 5CMX8CM casurina poles for horizantal bracings including labour charges, nails, screws, loading, unloading charges, transportation and removing after the counting is over. (15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 27 | Hire Charges for Steel barricading using 125mm GI Pipe for Vertical post 2.40m height at 3m intervels and 40x40xx6mm MS angle covered Four sides inbetween MS angles Using 20mm Hollow pressed Square rod spaced at 300mm centre to centre in both ways etc. complete(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 28 | Hire charges for materials , and cost of labour for providing barricading with casurina poles 10CM to 13CM dia for post of 2.40M above ground level fixing the post Vertical 8 Nos. of equal spacing fixed firmly as directed by the departmental officers etc ., complete and removing the same after the counting is over .(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 29 | Hire charges for providing Counting Result Display Board with the following specification. The Display board made out of steel tube outer frames with suitable verticle and horizantal cross members using the same materials over that 12mm MDF board screwed with the frames. The Result writting flex should be the pre printed format and firmly pasted in the board. The pre printed format should be got approved from the R.O. before the supply. The size of the Display Board is 12'0\\" x 8'0\\".(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 30 | Hire charges for Providing Samiyana pandal with wooden props. The rate includes the cost of transportation, fixing, labour charges, removing after the counting etc ., complete .(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 31 | Supplying and fixing colour galvanum sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 32 | Supplying and fixing mild steel grills for windows, ventilators, rtc., including priming coat., complete complying with standard specification and as directed by the departmental officers. |
| 33 | Supply of labour to assist handling materials, chairs and table arrangements and other works etc.,(Mazdoor Grade I)., complete complying with standard specification and as directed by the departmental officers. |
| 34 | Hire charges for Providing watch tower arrangements for the size of 4.50m x 4.50m x 10.50m height. The watch tower made with vertical support using 13 cm x 15 cm dia casurina poles all vertical poles tied with cross, middle portion is using 10CM X 13 CM dia casurina poles from ground level to 7.50m height level is using country wood plank platform is provided. The above platform is provided sloped pandal to prevent the rain and sunlight. The sloped pandal vertical support is using 10 cm x 13 cm dia casurina poles and slope roof rafter, purlin is using 8 cm x 10cm dia casurina poles and top covered with G I sheet. The slope pandal height is 3.00m from platform, The slope pandal is two side slope arrangements. The rate including cost of all materials, labour charges, transportation charges and removing this arrangements after the counting is over ,etc., complete. (15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 35 | Hire charges for Providing Acralic Sign board arrangements for indication of direction, information, etc . The rate includes the cost of transportation, fixing, labour charges, etc ., complete.(15 days)., complete complying with standard specification and as directed by the departmental officers. |
| 36 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. complete complying with standard specification and as directed by the departmental officers. |
| 37 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 38 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) Colour glazed European Water Closet with 12.5 litre capacity procelin flushing tank fixed with CI brackets |
| 39 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 40 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 41 | Manufacturing supplying and fixing of Fully panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided 6nos. of holdfasts 00 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 4nos. One the top of each shutter, one at lock rail and the other at the bottom are provided. 1no. Aldrop is provided at lock rail section in the door 3 Nos of handle are to be provided, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc.,complete complying with standard specification and as directed by the departmental officers. - Double leaf of size 1.20m x 2.10m. |
| 42 | Hire charges for providing checking counter size is 1.50m x 1.50m x 2.70m and made out of vertical support 4 Nos of size 4\\" x 4\\" CW scantling 3m height, bottom base platform 12mm thick MDF board with necessary CW scantling support and checking counter three side closing with 6mm thick ply wood with necessary CW Scantling support, checking counter front side 12mm thick MDF board door provided with necesary furniture fitting are used in this door including cost of all materials, Labour charges, transportation charges etc.(15 days) |
| 43 | Hire charges for providing postal vote counting tray with the following specification. The Postal vote counting tray made out of MDF board boxing with 14 boxes and the overall sixe of the counting tray with following sizes 1.70 x 0.80 x 0.30m |
| 44 | GST at 18% Please Enable Macros to View BoQ information |
