|
| 1 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 2 | Single socketed pipes. |
| 3 | 75 mm diameter |
| 4 | 110 mm diameter |
| 5 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 6 | Coupler |
| 7 | 75 mm |
| 8 | 110 mm |
| 9 | Single tee with door |
| 10 | 75x75x75 mm |
| 11 | 110x110x110 mm |
| 12 | Single tee without door |
| 13 | 75x75x75 mm |
| 14 | 110x110x110 mm |
| 15 | Bend 90° |
| 16 | 75 mm bend |
| 17 | 110 mm bend |
| 18 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 19 | W.C. pan with ISI marked white solid plastic seat and lid |
| 20 | Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 21 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 22 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 23 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 24 | Kitchen sink with drain board |
| 25 | 510x1040 mm bowl depth 250mm |
| 26 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 27 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 28 | Providing and fixing CP Brass 32mm size bottle trap approved quality & make complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 29 | 15 mm nominal dia |
| 30 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 31 | Flexible pipe |
| 32 | 40 mm dia |
| 33 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 34 | Providing and fixing unplasticised -PVC offsets epoxy coated inside & outside.complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 35 | 130 mm offsets |
| 36 | 110 mm dia |
| 37 | 75 mm dia |
| 38 | Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 39 | 100 mm inlet and 100 mm outlet |
| 40 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 41 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 42 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 43 | 15 mm nominal bore |
| 44 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 45 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 46 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 47 | 15mm nominal bore |
| 48 | Cutting holes up to 30x30 cm in walls including making good the same complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 49 | With common burnt clay F.P.S. (non modular) bricks |
| 50 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 51 | Providing and fixing toilet paper holder complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 52 | C.P. brass |
| 53 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge . |
| 54 | 110 mm inlet and 110 mm outlet |
| 55 | unplasticised -PVC pipe coated inside & outside Please Enable Macros to View BoQ information |
