|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 NAME OF WORK: REPAIR/REPLACEMENT OF COMPOUND WALL, AREA DRAINAGE, FOOTPATHS HARDSTANDING ETC IN OTM AND MD ACCN UNDER AGE B/R-III OF GE (WEST) DELHI CANTT-10 Contract No : CWE/WEST/TOKEN-50/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling posts or struts (wood, steel or RCC) any section, incl taking out embedded portion and making good disturbed in ground in concrete, brickwork, masonry etc all as specified and directed |
| 3 | Dismantling Fencing wire mesh, any type all as specified and directed. |
| 4 | Demolition of cement concrete of any description in any position not otherwise specifically provided for all as specified and directed. |
| 5 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surfaces in soft/loose soil. |
| 6 | M&L PCC 1:3:6 type C1(40mm graded aggregate)as in foundation filling and mass concrete all as specified and directed. |
| 7 | S&F Mild steel hand rails, half round or other steel section or core for hand-rail straight portion. Drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 all as specified and directed. |
| 8 | S&F Galvanised PVC chain link fencing 80x80mm with PVC coated mesh made out of 3mm dia MS wire and 1.5mm thick PVC coating through out and fixed to post all as specified and directed. |
| 9 | M&L MS round bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W(Gd E-250) quality -A or Fe 290(Gde-E-165) all as specified and directed. |
| 10 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10 cm and n exc 15 cm long of 5 to 10 mm dia of neck all as specified and directed. |
| 11 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repairs all as specified and directed. |
| 12 | Providing and fixing punched type concertina coil as per latest IS 6745-1972 with galvanised coating and punched type materials as per IS deep drawn quality with galvanised coating having large barbs fixed in position and secured to post/ y- arm stretched to a length so as to achieve 610mm dia having 52 turns and appx weight 8.75kg+5% and stretches not more than 6 running metre in lenght as in fencing including fixing with special galvanised fasteners such as clips fixed at any height of security fence wall incl dismantling all as specified and directed.*size of coil: 500mm dia/52 loops/3.5mm core wire*Type of strip: High galvanised conforming to IS 1730(1989)*Thickness of strip: 0.52mm*Zinc coating to strip: 120GSM/sqmm*Type of core wire: Heavy galvanized conforming to IS 280-2006*Zinc coating to core wire:240 gsm/sqmm*Tensile strength of wire: As per IS code*Weight: As per IS code*Stretchable length of each coil:6m |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 14 | M&L framed work as in doors or gates or water tank staging of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w(Gde-E-250 quality) all as specified and directed. |
| 15 | S&F Cast iron work Grade FG 150, articles n exc 5 kg each unmachined, in brackets, gully traps, grating, railing, frame, manhole covers, tanks cover, fire and soot doors, dampers, stop valves boxes, gate stops, parts of ranges, balusters and similar works all as specified and directed. |
| 16 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed. |
| 17 | M & L running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm all as specified and directed. |
| 18 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 19 | M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer all as specified and directed. |
| 20 | M&L for preparation of old steel and iron surfaces, kerb stone of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 21 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 22 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil. |
| 23 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil. |
| 24 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil. |
| 25 | Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point for soils |
| 26 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete all as specified and directed. |
| 27 | M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed. |
| 28 | M&L Brick work with burnt clay bricks sub class ‘B’ brick straight or curved on plain to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed. |
| 29 | Taking down precast cement concrete louvres and jallies, any thick embeded in any mortar incl frame complete all as specified. |
| 30 | Providing precast cement concrete louvres and jallies, 1:2:4 type B0, set in CM 1:4, 25mm thick (measured solid), including all mouldings but excluding frame) incl taking down complete all as specified. |
| 31 | Providing precast cement concrete 1:2:4 type B0, set in CM 1:4 in string courses, section size 50x75mm, for copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match all as specified and directed. |
| 32 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 33 | Material and labour for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement; 4 coarse sand)(sand source - Badarpur only) furrowing the under layer with scatching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 marble dust : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl nailing with 75 mm MS nails @ 450 mm both ways on wall surface complete all as specified complete incl taking down old plaster as per specifications and direction of the Engineer-in-charge. |
| 34 | M&L for forming groove (area of each panel not exceeding 2 sqm each) of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 35 | M&L 15 mm thick ready mix cement mortar on fair faces of brick work/concrete etc finished even and smooth without using extra cement complete all as specified. |
| 36 | M&L for laying rough cast plaster after applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while in plastic state the rough cast mixer consisting of crushed stone or fine gravel aggregate generally of size between 6 to 12 mm mixed with course sand cement in the ratio of 1:1:1 shalll be applied and finished even complete all as specified. |
| 37 | M&L Preparation of newly plastered surfaces of walls and applying two coats cement base paint on walls over a coat of alkali resistant primer all as specified and directed. |
| 38 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed. |
| 39 | Material & Labour for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over all as specified and directed. |
| 40 | M&L Preparation of old painted surfaces and applying one coat of cement base paint on walls all as specified and directed. |
| 41 | M&L Preparation of old Concrete/Asbestos /Cement/Plaster surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 42 | M&L Cement concrete 1:2:4 type B1using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed . |
| 43 | Demolition of cement oncrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 44 | M&L for Hardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface all as specified and directed. |
| 45 | M&L100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work all as specified and directed. |
| 46 | M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site. |
| 47 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 48 | M&L Granite(of any type)tiles 20mm thick as in floors and similar works over 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed. |
| 49 | M&L Granite(of any type)tiles 20mm thick as in skirting/dado and similar works over 10mm thick screed/backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete all as specified and directed. |
| 50 | M&L Machine cut kota stone slab 20-25 mm thick as in flooring,stair,skirting laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed. |
| 51 | M&L Kota stone slab 20-25mm thick in riser/tread of steps, skirting, dado/widow sill & pillar over and including 10mm thick plater in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 52 | M&L Rounding to edges of stone slabs on edge, such as in steps, cooking plaform, and other similar situations all as specified and directed. |
| 53 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed |
| 54 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 55 | All as item above item no 53 except fixing tiles all as specified and directed |
| 56 | M&LProviding and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 57 | M&L PCC designer pre polished chequred tiles of size 25cm x 25cm x25mm thick colored, reflective type glossy finish, machine pressed, vibro compacted, rubber moulded with cement and pigment and pointe in neat cement slurry in floors and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 58 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed. |
| 59 | S&F Coloured matte finished ceramic high depth elevation wall tiles (boundrywall/pillars etc) in vertical surfaces 600x300x7-9mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface all as specified and directed. |
| 60 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for all as specified and directed. |
| 61 | S&F factory made SFRC manhole covers 75mm thick, M-30, medium duty of size n.exc 1.00 Sqm each incl demolition complete all as specified and directed. |
| 62 | M&L Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, set in CM 1:4 as in cover slab and similar work incl necessary formwork in all as specified and directed. |
| 63 | M&L MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement all as specified and directed. |
| 64 | M&L MS TMT bars 6mm to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 65 | Material & Labour for providing and fixing stainless steel (Grade 304) railing, post, pole etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed. |
| 66 | Dismantling plain or corrugated steel sheeting/AC sheet, any gauge, thickness, incl nainital or similar pattern roof covering all as specified and directed. |
| 67 | M&L Pre-painted galvalume alu zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixxed with self tapping screws all as specified and directed. |
| 68 | Cleaning of existing storm water drain (any size or any depth) incl cleaning of grasses, vegetation growth, excavating deposited mud etc inside of drain and removing debris to a distance outside MOD land. |
| 69 | M&L for preparation of old any type of surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of floor guard paint over a coat of red oxide primer all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
