|
| 1 | Surface dressing n exc 15 cm deep in Soft/loose soil for hard standing Stage all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in Soft and Loose Soil for foundation, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 3 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified & directed. |
| 4 | Removing surplus soil to a distance n exc 50m and making good surface at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L for hardcore of broken boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L for RCC design mix M-30 using 20 mm graded stone aggregate for foundation including raft footing Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs, under-reamed piles and mass concrete etc., complete all as specified and directed. |
| 7 | M&L for RCC design mix M-30 using 20 mm graded stone aggregate for column, pillars, piers, post and struts etc., complete all as specified and directed. |
| 8 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on Flat rough finished surfaces of concrete. |
| 9 | M&L for formwork for Flat fair surfaces of finished concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, also splays between floors and beams, etc. complete all as specified and directed. |
| 10 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions on square, rectangular or polygonal rough finished surfaces of concrete |
| 11 | M&L for TMT steel reinforcement round bars (CRS/HCRM/CRM), 10 mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hoops/stirrups for columns, hooks, placing in position and binding with and including annealed mild steel binding wire not less than 0.90 mm dia, complete all as specified and directed. |
| 12 | All as per item No.11 above but 5mm dia and over upto & including 10mm dia in stirrups, spacers & binders |
| 13 | M&L for providing precast cement concrete solid building blocks masonry exc 10cm width, 1:3:6 type C-1, using 20mm graded stone aggregate set in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick plaster in CM 1:4 in two coats (10mm thick backing coat+5mm thick finishing coat) on concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. Note:(i). Water Proofing Compound as applicabe, shall be used at 2% of weight of cement or as per manufacturer's instructions, whichever is higher. (ii) WPC shall be measured and paid seperately under relevant item of schedule. |
| 15 | M&L for rendering 10mm thick plaster in CM 1:6 surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 17 | M&L for providing cement concrete, 75mm thick, 1:4:8 type, D-2, using 40mm graded stone aggregate as in sub base or sub floor etc. complete all as specified and directed. |
| 18 | M&L for preparation of new surfaces and applying two or more coats of 100% premium acrylic exterior emulsion paint, VOC less than 50 g/litre, UV resistant, conforming to IS 15489:2004, with alkali resistance, anti-fungal and dirt resistance, Company Depot Tinted, with silicon additives, of approved shade, applied @ 1.43 litre per 10 Sqm per coat, over and including one coat of exterior primer on new surfaces applied @ 0.90 litre per 10 Sqm, complete all as specified and as directed. |
| 19 | M&L for applying 3 mm thick wall care putty on old plastered surfaces of wall including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applying two coats of distemper etc complete all as specified and directed. |
| 20 | M&L for steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed. |
| 21 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard brass barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed. |
| 24 | S&F Steel locking bolts with mild steel electro-galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed. |
| 25 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls as rain water pipes all as specified and directed. |
| 26 | S&F 110mm dia PVC (SWR) bends all as specified and directed. |
| 27 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 28 | M&L for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminium angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminium main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all as specified and directed |
| 29 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed |
| 30 | M&L for 10mm thk PVC insulation panels with EPS stuck to 1mm plain PVC sheetsuitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification etc complete all as specified and directed |
| 31 | M&L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, as in floors etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 32 | M&L for Glazed ceramic Coloured tiles in vertical surface such as skirting, dado and rises to steps etc. 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM 1:3 set and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed. |
| 33 | M&L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polish. |
| 34 | M&L for 10 mm thick cement plaster 1:3 as backing coat for dado / skirting complete. |
| 35 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 36 | M&L for 600x450 mm bevelled edge looking mirror 5 mm thick selected quality glass mounted on 6 mm thick AC building board fixed to wall by wooden plug with chromium plated brass screw and cup washer fixed as in repair complete all as specified and directed. |
| 37 | M&L for Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed. |
| 38 | M&L for fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for 15 mm bore of pipe MAKE: Hindware Cat. No.: F570023 Sink Cock With Normal Swivel Spout-Wall Mounted or equivalent |
| 39 | S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed. |
| 40 | S&F 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed. |
| 41 | S&F in repairs vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed. |
| 42 | S&F Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule and fixed in repairs complete all as specified. |
| 43 | S&F bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 44 | S&F 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed by Engineer - in Charge. |
| 45 | M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75 mm bore etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 46 | M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75 mm bore etc complete all as specified and directed. Please Enable Macros to View BoQ information |