|
| 1 | M&L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks complete all as specified and directed. |
| 2 | All as per ser item No 1.00 above but except bricks complete all as specified and directed. |
| 3 | Demoliton Brickwork or stone/boulder masonry, cement motar complete all as specified and directed |
| 4 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brick work built in cement mortar etc complete all as specified and directed |
| 5 | All as per ser item No 4.00 above here-in-before but except brick complete all as specified and directed |
| 6 | M&L for plain cement concrete (1:3:6) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete including demoliton of PCC complete all as specified and directed. |
| 7 | M&L for Flush pointing to brick walls in cement mortar 1:4 complete all as specified and directed. |
| 8 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes or drain etc) and similar work including necessary form work and set in CM 1:6 incl dimolition of old slab complete all as specified and directed. |
| 9 | M&L for cement concrete (1:2:4), type B0, using 12.5 graded stone aggregate in roof kerbs or mud stop at junction bof roof slab and parapet wall, vertical surfaces and like etc complete all as specified and directed. |
| 10 | Mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed |
| 11 | M&L for 200 mm bore dia RCC Class NP 2 pipes laid and jointed with collar Demolition and breaking up drain pipes (Salt glazed stoneware, AC or RCC) set in cement mortar complete all as specified and directed. |
| 12 | M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including forming packing under and hunching against the sides of pipe after they are laid and tested for 200mm bore of pipe complete all as specified and directed. |
| 13 | S&F machine pressed coloured (yellow, red, black, white as directed) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed. |
| 14 | All as per Ser No Item No 13.00 here-in-before but except paver block, dismantling and shall be reused after necessary cleaning and making good complete all as specified and directed. |
| 15 | M&L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 16 | M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone incl rounded chamfered edge and set in CM 1:4 including demolition of old PCC kerb stone of any description complete all as specified and directed. |
| 17 | M&L Cement concrete in foundations, filling and mass concrete, Type C2 1:3:6 (using 40 mm graded stone aggregate) including demolition of old cement concrete in any description complete all as specified and directed. |
| 18 | M&L for 100mm PCC 1:2:4 Type B-2(using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as specified and directed. |
| 19 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified and directed |
| 20 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade B complete all as specified and directed. |
| 21 | M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed complete all as specified and directed |
| 22 | M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) complete all as specified and directed |
| 23 | M&L for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars cornces etc complete all as specified and directed. |
| 24 | M&L for preparation of new concrete, brick, kerb stone, asbestos cement surfaces and applying two coats of synthetic enamel paint with over a coat of primer of any description of plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 25 | M&L for preparation for old concrete, brick, kerb stone, asbestos cement surfaces and applying one coat of synthetic enamel paint of any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 26 | S&F precast PCC square pole in repair of M-15 Grade of size 150 mm x 150 mm at bottom & 100 mm x 100 mm at top of 2.25 m height with square base of size 45cm x45cm x15cm and at top pentagonal shaped PCC jali cover all around on square base of size 200 mm x 200 mm x 7.5 mm made as per shape complete all as specified and directed. |
| 27 | S&F steel work in tubular trusses and tubular posts, vertical/horizontal bar, chin up bar and similar works including special shaped washers, chequered plate etc, complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old mild steel of any description complete all as specified and directed. |
| 28 | All as per ser item No 27.00 above here-in-before but except mild steel (only errection and fixing) complete all as specified and directed |
| 29 | S&F Pre-painted Galvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering, chajjas/walls, fitting & fixing, zinc coating including tapping screw and etc incl dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.Note- Design/Pattern/colour of roofing sheet as approved by EIC/GE. |
| 30 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge hipe valley to wall, fixed with self tapping screws complete all as specified and directed |
| 31 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 32 | M&L for 35 mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed. |
| 33 | M&L, in repair for precast RCC pillar in 1:2:4 type B0 (using 12.5mm graded aggregate) decorative type of size (100mm x 100mm & 750 mm high) for RCC jalli incl fixing in conc etc incl dismantling existing pillar complete all as specified and directed. |
| 34 | S&F, in repair, for 5 mm thick ACP (Aluminium composite pannel) board prelaminated one sides with decorative choice laminations and fixed with screws to aluminium frame including aluminium of size pipe 40mmx25mm and 1.5mm thick best quality work complete all as specified and directed. |
| 35 | Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 36 | M&L for plain cement concrete (1:2:4) type B2, using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 37 | M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 38 | M&L for marble or any shade shade of thickness 18-20 mm thick in slab laid over 15mm thick screed bed in cement mortar 1:6 as in floor, steps, riser & treads and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises and rounding to edges of stone slabs one edge such as in counter type WHB platform etc.complete all as specified and directed. |
| 39 | M&L for Granite 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edging incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 40 | M&L for heavy duty, exterior grade (Durastone of Somany/Endura of Johnson or equivalent as approved by GE) of any size 12 mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 41 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cills, PCC blocks, coping,haunching and benching bed plates, seismic and other similar bands, plinth bends, etc including weathering slightly rounded or chamfered angles and throuting, inclusing necessary form work etc complete all as specified and directed |
| 42 | M&L for preparation of old paver block, chequred tiles concrete, brick, kerb stone surfaces and applying two coats Indico covering 6 to 8 Sqm in 1 Ltrs including a coat of primer for old surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
