|
| 1 | M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 6.00 including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge : |
| 2 | CHAIR DINING ( FD - 16 (M) /FD - 279) : |
| 3 | Rear Legs Made of 1st Class hard wood (Teak Wood) |
| 4 | Front legs Made of 1st Class hard wood (Teak Wood) |
| 5 | Stiffners Made of 1st Class hard wood (Teak Wood) |
| 6 | Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood) |
| 7 | Side rails Made of 1st Class hard wood (Teak Wood) |
| 8 | CHAIR WRITING ( FD - 20 (M) FD - 280) : |
| 9 | Rear Legs Made of 1st Class hard wood (Teak Wood) |
| 10 | Front legs Made of 1st Class hard wood (Teak Wood) |
| 11 | Side rails Made of 1st Class hard wood (Teak Wood) |
| 12 | Arms Made of 1st Class hard wood (Teak Wood) |
| 13 | Stiffners Made of 1st Class hard wood (Teak Wood) |
| 14 | CHAIR EASY (FD - 17 (M) FD - 229) : |
| 15 | Legs Made of 1st Class hard wood (Teak Wood) |
| 16 | Side rail for seat Made of 1st Class hard wood (Teak Wood) |
| 17 | Front/Back Rail for seat Made of 1st Class hard wood (Teak Wood) |
| 18 | Arms Made of 1st Class hard wood (Teak Wood) |
| 19 | STOOL DRESSING CB (FD- 282 ) : |
| 20 | Legs Made of 1st Class hard wood (Teak Wood) |
| 21 | Side/Front rail for seat Made of 1st Class hard wood (Teak Wood) |
| 22 | Centre/Short Stiffeners Made of 1st Class hard wood (Teak Wood) |
| 23 | CHAIR DINING PVC SEAT (FD/E6/MAP/05®) : |
| 24 | Rear Legs Made of 1st Class hard wood (Teak Wood) |
| 25 | Front legs Made of 1st Class hard wood (Teak Wood) |
| 26 | Stiffners Made of 1st Class hard wood (Teak Wood) |
| 27 | Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood) |
| 28 | Side rails Made of 1st Class hard wood (Teak Wood) |
| 29 | PVC Seat |
| 30 | S&F in replacement of unserviceable PVC shoe with new Hard Rubber Ring shoes of 25mm dia of best quality for item Srl No. 2.00, 3.00, 4.00, 5.00,& 6.00 complete all as specified and as directed by the Engineer-in-Charge . |
| 31 | Labour for removing the U/S worn out / broken cane & re-canning with new plastic cane of not less than 1.8 mm wide x 0.46mm thick and border caning atleast 3.5mm wide as per Godrej pattern including total scrubbing & cleaning of surfaces tightening the frame for chair dining, chair writing, chair easy, stool dressing, Bin soiled linen, etc. Complete all as specified and as shown in drgs. and as directed by Engineer-in-Charge. |
| 32 | CHAIR VERANDAH (FD-256) : |
| 33 | Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane. |
| 34 | M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. |
| 35 | M&L painting of chair steel frame with two coat of synthethic enamel paint of approved shade after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding and applying a primer coat of red oxide all as directed by Engr-in-Charge. |
| 36 | S&F PVC Shoes |
| 37 | CHAIR CBA STEEL W/ARMS (FD-75) |
| 38 | Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made from commercial plywood 12 mm thick and 50 mm thick 40 D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. |
| 39 | All as per Sl. No. 10.01 but for Back of Chair CBA Steel of size 460x380mm |
| 40 | M&L for welding with 25 x 3.0 mm MS flat iron 510 mm long with holes to fix screws to seat/back frame for fixing sheet/back frame including screws complete all as specified and as directed for Chair CBA Steel (FD 75 (M) |
| 41 | S&F new PVC Caps. |
| 42 | S&F new IInd class hard wood/PVC arms as per sample. |
| 43 | S&F wooden seats of IInd class hard wood duly caned (Godrej pattern) and polished for chair CBA Steel |
| 44 | S&F wooden back of IInd class hard wood duly caned (Godrej pattern) and polished for chair CBA Steel |
| 45 | CHAIR CB STEEL W/O ARMS (FD-75) |
| 46 | Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made from commercial plywood 12 mm thick and 50 mm thick 40 D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. |
| 47 | All as per Sl. No. 11.01 but for Back of Chair CBA Steel of size 460x380mm |
| 48 | S&F wooden seats of IInd class hard wood duly caned (Godrej pattern) and polished for chair CB steel. |
| 49 | S&F wooden back of IInd class hard wood duly caned (Godrej pattern) and polished for chair CB steel. |
| 50 | S&F MS flat iron 25 x 3 mm duly welded to seat/Back frame of chair CB/CBA steel for fixing seat/back frame including screws complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | S&F new PVC Caps. |
| 52 | CHAIR CBA SPL WITH HANDREST (FD-120(M) |
| 53 | S&F wooden seat frame of Ist class hard wood (Teak Wood) duly caned (Godrej pattern) and polished for chair CBA Spl with hand rest all as specified on drg and as directed by Engr-in-Charge. |
| 54 | S&F wooden back frame of Ist class hard wood (Teak Wood) duly caned (Godrej pattern) and polished for chair CBA Spl with hand rest all as specified on drg and as directed by Engr-in-Charge. |
| 55 | Removing of unserviceable hand rest in any position, S&F new hand rest made out of 12mm thick Teakwood plank with suitable size of screws all as specified on drg and as directed by Engr-in-Charge. |
| 56 | TABLE BED SIDE (FD-248/276) : |
| 57 | Back ply of Table bed side 6mm commercial ply |
| 58 | Sides of Table Bed side of Exterior grade Prelaminated MDF Board 18/19 mm |
| 59 | Shelf of Table Bed side of Exterior grade Prelaminated MDF Board 12 mm |
| 60 | Top/Bottom of Table Bed side of Exterior grade Prelaminated MDF Board 18/19 mm |
| 61 | S&F of stiffner of size 25x25mm and 230mm long at the bottom of both legs. |
| 62 | Teak Wood Legs (FD - 248) joined with stiffener of 20x40mm |
| 63 | HAT STAND WITH MIRROR (FD-233 ) : |
| 64 | S & F Peg hook brass as per drg. |
| 65 | S&F in replacement of unserviceable mirror with new mirror 5 mm thick |
| 66 | M&L in replacement of unserviceable front ply and new ply 3/4 mm thick one side teak faced |
| 67 | M&L in replacement of unserviceable Back ply and new ply 3/4 mm thick |
| 68 | 35x6mm Teakwood Edging |
| 69 | TABLE DRESSING GENTS WITH MIRROR (FD-31/230/379) : |
| 70 | S&F, in repair, unserviceable looking mirror 5mm thick Make : Modi Guard/Atul along with new 6 mm thick commercial plywood back of mirror frame including two coats of French Polish to all parts. |
| 71 | S& F new drawers as per drawing |
| 72 | Top/Bottom of Box of Table Dressing Gents Made of 12 mm thick Exterior grade Prelaminated MDF Board |
| 73 | Sides/Partition of Box of Table dressing Made of 12 mm thick 1st Class Hardwood(teakwood) |
| 74 | Back of the Box of Table dressing Made of 12 mm 1st Class Hard wood (Teak Wood) |
| 75 | S&F new SS Knobs as approved by Engr-in-Charge |
| 76 | S& F New MDF Sheet of thickness 3mm on old outer Surface of Table Dressing Ladies/Gents / Side Board etc as directed. |
| 77 | S&F Wooden Corner Brackets of size 75x75x25mm in Item Sr No 1.00,2.00,3.00, 4.00, 5.00 & 6.00 |
| 78 | M&L for removing the existing u/s eye hook/Key Plate and new MS eye hook all as specified, complete in all respect at site. |
| 79 | Labour for cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty including tightening of loose joints with screws if any and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site) |
| 80 | Chair Easy FD 17/229 |
| 81 | Chair Writing FD-20(M)/280 |
| 82 | Chair Dining FD-16/279/MAP |
| 83 | Stool Dressing FD 27/252 |
| 84 | Chair Dining PVC Seat (FD/E6/MAP/05® |
| 85 | Table Bed Side (FD-248/276) |
| 86 | Hat Stand Mirror (FD-233) |
| 87 | Table Dressing Gents with Mirror (FD-31/230/379) |
| 88 | Denting/bending/welding, repairs of damaged parts, fixing loose shelves/Components, scraping and complete removal of existing coat of paints, filling with putty to obtain even surfaces, finishing and painting with two coats of synthetic enamel paint of approved shade with spray after applying a coat of red oxide primer as directed by Engr-in-Charge for the following: (Note:Painting including at site) |
| 89 | Chair CBA steel with arms (FD-75) |
| 90 | Chair CB steel without arms (FD-75) |
| 91 | Chair CBA Spl with hand rest (FD-120(M) Please Enable Macros to View BoQ information |
