|
| 1 | Schedule 'A' |
| 2 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store all as specified. |
| 3 | Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified |
| 4 | S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed |
| 5 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified. |
| 6 | S&F factory made 30mm 2 class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed. |
| 7 | S&F fiber glass reinforced plastic (FRP) door frames of three legged of cross section 90 x 45 mm having single rebate of 32 x 15 mm to receive shutter of 30 mm thick. The laminate door frame moulded with fire retardent grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block of 2nd Class Hardwood in all the three legs. The frame shall be covered with fibre glass from all side M.S stay shall be provided at the bottom to sedy the frame complete as per direction of Engineer - in - Charge. |
| 8 | S&F 30 mm thick glass fiber reinforced plastics paneled door shutter of required colour & approved colour and manufactrures made with fire retardent grade unsaturated polister resin,moulded to 3mm thick FRP laminate for forming hollow rails & styles with wooden frame & suitable blocks of seasoned wood inside at required places for fixing of fittings along with MS tube frame of 19 gauge all around the styles & rails duly coated with steer primer cast monolithically with 5mm thick FRP laminate forpanels & conforming to IS:14856:2000 including fixing to frames. The shade & colour shall be approved by Engineer-in-Charge |
| 9 | S&F 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 10 | S&F 200mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed. |
| 11 | S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified. |
| 12 | S&F 100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed all as specified. |
| 13 | S&F 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring. |
| 14 | M&L for Providing and applying of silicon sealent in construction joint, window glass,polycarbonate sheets and required places to make joints water tights, after racking out of joints/cracks wherever necessary & throughtout cleaning at different level complete all as specified and as directed by Engineer-In-Charge. |
| 15 | S&F in repair powdercoated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 16 | S & F Plain colour PVC sheet 2mm thick fixed or laid on to aluminium doors by using rubber based adhesive, supplying & fixing at site as per specification |
| 17 | S&F in repairs powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 18 | S & F in repairs aluminium grills with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG-104 7.5 mm thick all as specified and directed. |
| 19 | S&F in repais Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified. |
| 20 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 21 | S&F in repairs 12 mm thick toughened glass for door, partition etc. of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top, bottom and sides, lock and handles, spider joint etc. and floor door spring as per requirement all as specified, required at site by manufacturer instructions and complete all as specified and directed. |
| 22 | S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane all as specified and as directed |
| 23 | M&L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers exc 1.5 sqm |
| 24 | Taking down aluminium decogrills and refixing in the same opening including cutting of decogrills if required etc all as directed |
| 25 | Taking down and Repair to steel gate of garrage/entrance etc of size exc 3sqm by taking down and necessary welding work including welding of Hinge, Cleats, MS Plate, MS Sheets etc complete all as specified and as directed by Engineer-In-Charge.Note: Welding work will be carried at site by arrangement of welding machine without any extra cost to the Government. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premisess complete all as specified and as directed |
| 27 | M&L for non-skid ceramic tiles, white/coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular (area exceeding 0.06 Sqm but not exceeding 0.11 Sqm) joint free, as in floors, etc.set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 28 | M&L for coloured Glazed ceramic tiles,of size 300x200x 7 to 8mm thick of superior quality fixed on vertical surfaces such as skirting / dado / risers of step etc.,set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles fixed over & including backing coat of 10mm thick plaster in CM (1:4) complete all as specified and as directed. |
| 29 | M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design), 10mm thick, of superior quality, (square / rectangular) polished, area of each tiles not exceeding 0.36sqm,joint free, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles ,laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 30 | All as per item No 28.00 above but vertical surfaces such as skirting, dados etcincluding screed bed layer 10mm thick in cement mortar 1:3 finished even and rough for receiving tiles on vertical surfaces complete all as specified. |
| 31 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, compound wall etc.laid dry beded in any mortor complete all as specified. |
| 32 | M&L 20mm thick Granite work in steps, jambs, pillars, window-cills, cooking platforms laid over CM 1:4 , 15mm tk cement screed and jointed with grey cement slurry, and pointed with white cement with admixture ofpigment to match the shade ofgranite stone including grinding and polishing complete all as specified |
| 33 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 34 | M & L for Kota stone 20 to 25mm thick of 40mm width for strip at doors cills in single pieces fixing with polymer modified tile adhesive of approved make etc complete |
| 35 | S & F in repair to ( incl Dismantling ) 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging complete all as specified. |
| 36 | S&F of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps complete all as specified and directed. |
| 37 | Repair and refixing of aluminium window shutter to make it openable/slide smoothly, including cutting, repair/change of all necessary fittings/fixtures for window like cleates , locking arrangements glazing cleats and cadmium plated stainless steel screws including rubber gaskets beadings etc complete all as specified and as directed by Engr in charge |
| 38 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed |
| 39 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 40 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 41 | M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete all as specified and directed. |
| 42 | M&L for two coats of oil bound distemper over a coat of priming coat on newly prepared wall surfaces, including 3 mm thick layer of wall care putty (Birla white or equivalent) all as specified and directed.. |
| 43 | Disconnecting existing tanks upto 1000 ltr Cap , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position with Cleaning , repairing,incl complete connection with inlet and outlet with GI / CPVC pipe fitting , Float valve etc Complete all as spd and as directed by Engineer in Charge |
| 44 | Dismantling water tanks up to 250 ltr capacity Complete all as spd and as directed by Engineer in Charge |
| 45 | M&L for Rotational moulded polyethylene water storage tanks of cap upto 250 Ltr Cap (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I Complete all as spd and as directed by Engineer in Charge |
| 46 | Supplying and laying of 16mm of CPVC pipes to CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified as in repair complete all as specified directed. |
| 47 | All as per above item No 45.00 but 20mm bore pipe. |
| 48 | All as per above item No 45.00 but 25mm bore pipe. |
| 49 | All as per above item No 45.00 but 40mm bore pipe. |
| 50 | All as per above item No 45.00 but 50mm bore pipe. |
| 51 | M&L for 25mm long handle CPVC ball valve for 25 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent Complete all as specified and directed by Engr-in charge. |
| 52 | M&L for 20mm long handle CPVC ball valve ( Gate Valve ) for 20 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent Complete all as specified and directed. |
| 53 | M&L for 16mm CPVC ball valve ( Gate Valve ) for 16 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent Complete all as specified and directed. |
| 54 | M&L for 16mm CPVC Union for 16 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent Complete all as specified and directed. |
| 55 | All as per above item No 53.00 but 20mm bore pipe. |
| 56 | All as per above item No 53.00 but 25mm bore pipe. |
| 57 | All as per above item No 53.00 but 32mm bore pipe. |
| 58 | All as per above item No 53.00 but 40mm bore pipe. |
| 59 | All as per above item No 53.00 but 50mm bore pipe. |
| 60 | M&L for Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed as in repair Complete all as spd and as directed by Engineer in Charge |
| 61 | M&L for Vitreous China wash down water closet pan Angilo Indian Type with P or S trap, snow white or white colour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat cover as in repair complete all as spd and directed by engineer in charge |
| 62 | M&L for Vitreous China wash down water closet pan (European type) with P or S trap, snow white or white colour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat cover as in repair complete all as spd and directed by engineer in charge |
| 63 | S&F in repairs of Viterious china wash hand basin white flat back of size 550x400 mm ,including brackets,waste coupling and waste pipe , or fixed with existing plateform surfaces with sealent with white cement etc complete all as specified and directed. |
| 64 | Fixing only in High or low level fluslhing cistern retrived fromexisting IWC/EWC OR Angilo Indian type (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all sapecified and as directed By Engineer in Charge |
| 65 | M&L for Special treatment to sunken portion of WCs and Bath room as per following stages upto depth 50cm depth :Stage 1: Demolition/Dismentling of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc .Stage 2:- Providing 10mm thick plaster in CM 1:4 with chemical of plaster seal.Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry conditionStage 4:- Applying two coats of water proofing of Dr Fixit Pidicrete for the sunken portion of toilets/bathrooms (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instructionStage 5:-Again rendering 10mm thick in CM 1:4 mixed with Dr Fixit Pidicrete URP or plaster seal of STP Ltd.Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URPStage 7. Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof and layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.0 Kgs per Sqm, reinforced with non wovwn polyster fabric or weight not less 160 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm minimum) and then inserted insde the groove of parapet wall and shall be finished by a membrane flashing. Stage 8:- Making holes in wall and fixing 600mm long 25mm dia GI spout for draining the surplus water if any. Make : Dr Fixit ,Krishna, Sika ,Chemistik or Equallent make approved by GE Please Enable Macros to View BoQ information |
