|
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified . |
| 2 | Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) |
| 3 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 4 | Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all complete and as specified. |
| 5 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in any type of soil, all as specified. |
| 6 | Retuning filling in incl spreading, leveling watering and well ramming in layers not exc 25 cms. |
| 7 | Removing excavated soil n.exc 50m and depositing where directed at a level n.exc. 1.5m above the starting pointing. |
| 8 | M&L For PCC Type C2 1:4:8 (using 40mm graded aggregate) as in surface channel and drains complete all as specified. |
| 9 | M&L For Brick work with sub class 'B' Bricks (old size bricks),straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:6 as in brick edging. |
| 10 | All as per srl item No. 9 above but except bricks. |
| 11 | M&L For Brick work with sub class 'B' Bricks (old size bricks), straight or curved on plan any radius in half brick wall built in cement mortar 1:4 complete all as specified. |
| 12 | M&L for flush pointing to brick masonary in Cement Mortar 1:4. |
| 13 | Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd. |
| 14 | M&L For precast cement concrete type B-1 1:2:4 (using 20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:6 complete all as specified. |
| 15 | M&L For 300mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified. |
| 16 | M&L For concrete bed to drain pipes for 300mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 Complete all as specified. |
| 17 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified. |
| 18 | M&L For 10mm thick cement plaster in cement mortar 1:4 on fair faces of bricks or concrete surface and finished even and smooth without using extra cement complete all as specified. |
| 19 | M&L For 15mm thick cement plaster in cement mortar 1:4 on stone masonry,Brick Masonary surfaces or surface other than fair face of brickwork and finished even and smooth without using extra cement, complete all as specified. |
| 20 | M&L For Preparing plastered or unplastered new surfaces of walls and applying two coats of cement base paint Complete all as specified . |
| 21 | M&L For Preparing Old plastered surfaces and Applying two coats of cement based paint on walls. |
| 22 | M&L for Cement concrete type D-2, 1:4:8(40mm graded agg) as in foundations, filling and mass concrete, sub base all as specified. |
| 23 | M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L For Chequered cement concrete tiles 30cm x 30cm x 25mm thick/25cm x25cm x25mm thick, Glossy finish set, with grey cement and pigment, jointed and pointed in neat cement slurry in floors over and incl 20mm thick screed bed in CM 1:4, complete all as spd & direction. |
| 25 | M&L Machine pressed precast concrete interlocking coloured (red/ yellow) paver blocks, Glossy finish, any shape and size of 60mm thickness M-35 grade over and incl 50mm thick sand cusion complete all as specified (Sample & laying pattern approved by GE) complete all as specified. |
| 26 | M&L Machine pressed precast concrete interlocking coloured (red/ yellow) paver blocks, Glossy finish, any shape and size of 80mm thickness M-35 grade over and incl 50mm thick sand cusion complete all as specified (Sample & laying pattern approved by GE) complete all as specified. |
| 27 | M&L For Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in copings, kneelers, apex stones, bed plates, etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works,all as specified . |
| 28 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. |
| 29 | M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 30 | M&L preparation of old painted steel surfaces of any description not otherwise specified over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charged. |
| 31 | M&L For precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies,25mm thick Set in cement mortar 1:4 (measured solid), including all mouldings but excluding frame all as directed and specified. |
| 32 | M&L For precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match all as directed and specified. |
| 33 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required incl demolition existing paver blocks complete all as specified. |
| 34 | M&L for walling of random rubble masonary, uncoursed well bonded, bedded and solidly hearted built in CM 1:6. complete all as specified and directed by Engineer-in-charge. |
| 35 | All as per item No.34 above, but except stone. complete all as specified and directed by Engineer-in-charge. |
| 36 | M&L For Raised pointing to random rubble walling uncoursed in CM (1:3) complete all as specified. |
| 37 | M&L Complete removal of existing treatment and preparation of old surfaces and applying two coats of Acrylic emulsion ( Apex Paint) Complete all as specified. |
| 38 | M&L for preparation of old floor surfaces and one coat of Water Based Acrylic coating on Concrete,Paver,Stone and Tiles Surfaces all as specified and directed. |
| 39 | M&L 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in floor/apron etc Complete all as specified. |
| 40 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. Please Enable Macros to View BoQ information |
