|
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Earth work In excavation over areas (exceeding 30 cm In depth, 1.5 M in width as well as 10 Sqm On Plan), in all kinds of soil, by mechanical means (hydraulic excavator) including getting out and disposal of excavated earth lead upto 50 M and lift upto 1.5M, as directed by Engineer-in- charge. |
| 3 | Earth work In excavation over areas (exceeding 30 cm In depth, 1.5 M in width as well as 10 Sqm On Plan), in all kinds of soil, by mechanical means (hydraulic excavator) including getting out and disposal of excavated earth lead upto 50 M, for each additional 1.50m or part thereof in depth beyond the first 1.50m lift as directed by Engineer-in- charge. |
| 4 | Earth work In excavation by mechanical means (hydraulic Excavator)/ in all kinds of soil, In foundation trenches or drains (not exceeding 1.5 M in width Or 10 Sqm On Plan), including dressing of sides and ramming of bottoms, lift upto 1.5 M, including getting out the excavated soil and disposal of Surplus Excavated Soil within A Lead Of 50 M as directed by Engineer-in- charge. |
| 5 | Material and labour for PCC (1:2:4) type B2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 8 | Supply and fix mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply and fix mild steel TMT bars, 5 to 8mm, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for reinforced cement concrete M-30 (design mix) (using 20mm graded stone aggregate) as in foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete and similar work etc complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labour for rough finished surfaces of concrete for foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for reinforced cement concrete M-30 (design mix) (using 20mm graded stone aggregate) sides of pillars, posts, struts, piers, columns, etc. complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for rough finished surfaces of concrete, measured flat, for square or rectangular surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for brick work with fly ash bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material & labour for Rolled mild steel as in MS base plates (plain or chequered), channels , square cut or notched ( ordinary and counter sunk) forming holes including cutting ,welding or connecting conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer in charge. |
| 16 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-ChargeNote- Work to be carried out for height upto 15 mt and above/ factory type bldg/Hanger)Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/ Tata |
| 18 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-ChargeNote- Work to be carried out for height upto 15 mt and above/ factory type bldg/Hanger)Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/ Tata |
| 19 | Supply & Fix 0.63mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engr-in-Charge. |
| 20 | Material and labour for rendering 15mm (10mm + 5mm ) thick plaster in two coats in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces of any thickness & finishing the surface even & smooth without using extra cement mixed with water proofing compound complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately |
| 21 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit |
| 22 | Material and labour for preparing new steel surfaces /previuosly untreated surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.Make: Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd |
| 23 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India/ Birla Opus Paints |
| 24 | Material and labour for hardcore of broken stone or boulders of gauge exc. 63 mm but n exc.100mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Material and labour for 120mm thick cement concrete (1:2:4) type B2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labour for Granolithic concrete 1:1:2 floor topping 30mm thick; laid over cement concrete subfloors etc. and finished to an even and fair surface complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and labour for hardcore of bricks of gauge exc. 63 mm but n exc.100mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge..Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral |
| 30 | Supply and fix PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by Engineer-in-ChargeMake :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral |
| 31 | Material and labour for site clearance in soft /loose soil including cutting of grass and small trees etc complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, or pole or laying of cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil include for dressing/trimming sides and levelling/grading and ramming of bottoms of excavation. all as specified and as directed by Engineer -in-Charge |
| 33 | Removing excavated material to a distance exceeding 1.50 Km but not exceeding 5 Km and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 34 | Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation / mass concrete/coping etc including necessary formwork for fair finished surfaces complete all as specified and as directed by the Engineer-in-charge |
| 35 | Material and labour for cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains, benching, haunching etc. including necessary form work for fair finished surfaces complete all as specified and as directed. |
| 36 | Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-ChargeMake : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral |
| 38 | Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:-Note : Earthwork excavation, DWC pipe for cable protection shall be measured and paid separately in their respective itemMake: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI) |
| 39 | Excavation over areas n. exc 1.5 m in deep and getting out in hard/dense soil and removal outside MD land complete all as specified and as directed by Engr-in-Charge |
| 40 | All as per item No . 39 here in above but depth beyond 1.5metre or part thereof |
| 41 | Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/filling complete all as specified and as directed by the Engineer-in-charge |
| 42 | Material and labour for walling random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labour for Plain Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate as in foundation / mass concrete/coping etc including necessary formwork for fair finished surfaces complete all as specified and as directed by the Engineer-in-charge |
| 44 | Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge..Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral |
| 45 | Supply and fix PVC (SWR) bends any radius, 75mm bore complete all as specified and as directed by Engineer-in-ChargeMake :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral |
| 46 | Supply and fix UPVC pipe in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) including coupler, elbow, external end cap and running outlet 150mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.Make : Prince / Supreme / Finolex |
| 47 | Supply and fix 110 mm dia leaf trap with khurra made out of uPVC with flange and grating for rainwater outlets on terrace and balcony including all necessory grouting with sealent to make it waterproof Make : Supreme/ PRINCE (Ultrafit)/ KSR/ Finolex/ Astral |
| 48 | Material and labour for Shingle or gravel, spread, rolled and consolidated to gradient and camber required for 100mm spread thickness complete all as specified and as directed by Engineer-in-Charge |
| 49 | Material and labour for sand/coarse sand, spread, rolled and consolidated to gradient and camber required for 100mm spread thickness complete all as specified and as directed by Engineer-in-Charge |
| 50 | Material and labour for broken stone or boulders guage 40 to 80mm, deposited, spread and levelled in layers watered and framed to a true surface in soakage pits, soakage wells complete all as specified and as directed. |
| 51 | Material and labour for broken bricks guage 40 to 80mm, deposited, spread and levelled in layers watered and framed to a true surface in soakage pits, soakage wells complete all as specified and as directed. |
| 52 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Material and labour for rendering 15mm thick in cement mortar 1:4 on external wall surfaces and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Material and labour for boring for Bored cast in situ piles 30 meters in soil and getting out and disposal of spoil to a distance 50 mtr using DMC method (Direct mud circulation) 350 mm dia complete all as specified and as directed. |
| 55 | Material and labour for 250mm bore UPVC pipe of pressure rating 10 kg/sqcm assembling jointing , lowering in any position upto required depth below given level including jointing the pipe with solvent and screwing four Nos screws in each joints includes top cap, complete all as specified and dircted Make: Finolex/Prince/Kisan/Supreme/SFMC |
| 56 | Material and labour for 150mm bore UPVC slotted pipe of pressure rating 10 kg/sqcm assembling jointing , lowering in any position upto required depth below given level including jointing the pipe with solvent and screwing four Nos screws in each joints includes top cap, complete all as specified and dircted Make: Finolex/Prince/Kisan/Supreme/SFMC |
| 57 | Material and labour for Selecting stone, brick, concrete, etc. suitable for handpacking, filling of hardcore from excavated spoil heaps, removing and piling in convenient places within 50m of spoil heaps, etc. and raising or lowering to required level (measured after selection) complete all as specified and as directed by Engineer-in-Charge. |
| 58 | Material and labour for providing 50mm thick precast cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) manhole / drain covers etc., jointed in cement mortar 1:6 and pointed in CM 1:3 finishing the exposed faces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Material and labour for hardcore of broken stone or boulders of gauge not exc . 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Material and labour for 100 mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Material and labour for flush pointing to brick walls in cement mortar (1:3) complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Material and labour for rolled mild steel sections as in joist, channel, angle, or tee sections, fixed independently, without connecting plates etc conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Material & labour for Rolled mild steel conforming to grade Fe-290 (Gde E165) as in MS base plates (plain or chequered), channels , square cut or notched ( ordinary and counter sunk) forming holes including cutting ,welding or connecting complete all as speciied and as directed by Engr-in-Charge. |
| 65 | Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs,mud stops, rounded or chamfered on edges in lintel upto 1.5m clear span, cills, steps, bands plinth course, string courses, lacing cources, parapet railing upto 60cm in height, copings, kneelers, apex stones, bed plates,concrete block for hold fast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Supply and install hi wall-mounted split units indoor/outdoor, operating voltage 110 to 285volts, 50Hz complete with cordless remote control unit and with in-built anti-microbial air filtration, dehumidifier for better indoor air quality with minimum 5 star rating, DNNS Self Heal Coating and EER upto 3.2of capacity 1.5TR, inverter type, 6in1convertible or adjustable mode, high swing typel eft}/right}/up}/down}, with high ambient temperature upto 52degree celcius including fixing of voltage stabilizer 5KVAwith digita ltemperature display and MS bracket for outdoor unit on wall with copper cooling tube extra upto 15RMetccomplete all as specified and directed by Engineer in Charge. Make: BlueStar/ Lloyd/Daikin/Hitachi/ O General/ Mitsubishi |
| 67 | Supply and fix SPN sheet metal enclosures with two pin and earth plug and socket, 20Amps, controlled by MCB SP 20Amps, 240 Volts complete all as specified and as directed by Engineer-in-Charge.Make: Havells / Legrand / L&T |
| 68 | Supply and fix 5 KVA voltage stabilizer, 240 volts, 50Hz suitable for 1.5 Ton air conditioner complete all as specified and as directed by Engineer-in-Charge.Make :V-Guard / Schneider / Havells |
| 69 | Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 4sqmm (nominal area) drawn through and including non metallic PVC conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 4.0 sqmm as earth continuity conductor and connecting to common earth dolly suitable for 1.5 TR AC complete all as specified Note- The rate of point wiring includes the following. :- Copper cables, PVC conduit with accessories , and other accessories such as modular GI box, modular inner plate and modular cover plate etc .Make of Cable-Plaza, Finolex, Havells, PolycabMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 70 | Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly completefor One light point ontrolled by one, one way switch , all as specified and as directed. Note- The rate of point wiring includes the following. :- Copper cables, PVC conduit with accessories , and other accessories such as modular GI box, modular inner plate and modular cover plate etc . Make of Cable-Plaza, Finolex, Havells, PolycabMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 71 | All as per item No. 70 here-in-before but for fan/exhaust point controlled by one switch |
| 72 | All as per item No. 70 here-in-before but for one 3 pin 5 Amps socket outlet point controlled by one switch on same board |
| 73 | All as per item No. 70 here-in-before but for one 3 pin 5 Amps socket outlet point on the independent board with other switches controlled by one switch. |
| 74 | Material and labour for point wiring with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLSH cable 4.0Sqmm, 1100 volt grade for phase and neutral confirming to IS 694, drawn through in and including (heavy grade) rigid non metallic PVC conduit pipe, not less than 20mm dia, ISI marked & conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chasing on wall for concealed conduit incl making the surface as per existing surfaces including 1.5mm thick modular MS box with modular cover and top plate for housing modular switches, socket outlets, regulators etc including 4.0 sqmm 1100 volts grade PVC insulated FRLS unsheathed flexible, multi stranded copper conductor cable (green colour) as continuous earthwire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end for one 15A socket outlet controlled by one switch on independent board complete all as specified and as directed Make of Cable- Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 75 | Supply and fix modular switch one way 6A, one module, 240 V, all as per relevant IS complete all as specified Make : Legrand / Anchor (Panasonic) Vision /Crabtree/Honeywell |
| 76 | Supply and fix modular switch one way 16A, one module, 240 V, all as per relevant IS complete all as specified Make : Legrand / Anchor (Panasonic) Vision /Crabtree/Honeywell |
| 77 | Supply and fix Modular socket outlet, , 6Amps /16Amps, 2/3Pin combined 2 module, complete all as specified and as directed by Engineer-in-Charge.Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 78 | Supply and fix Modular socket outlet, , 6Amps , 2/3Pin combined 2 module, , complete all as specified and as directed by Engineer-in-Charge.Make: Anchor / Legrand / Havells/.Crabtree/Leader |
| 79 | Supply and fix ceiling rose, 5 Amps, 3 phase, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge.Make: Legrand /crabtree/ Honeywell/ Anchor |
| 80 | Supply and fix MCB distribution board ETPN, 415 volts 4 way, double door powder coated, CRCA steel sheet constructed as per IS: 8623, degree of protection IP 43-IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and as directed by Engineer-in-Charge.Make: Havells / Legrand / L&T |
| 81 | Supply and fix MCB distribution board SPN, 240 volts 4 way, 200 Amps, double door powder coated, CRCA steel sheet constructed as per IS: 8623, degree of protection IP 43-IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and as directed by Engineer-in-Charge.Make: Havells / Legrand / L&T |
| 82 | Material and labour for submain wiring complete with and including 2 runs of 4sqmm, single core FRLSH, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including suitable size of PVC conduit, medium grade of size 20mm dia with accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and one run of 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly all as specified and as directed by Engineer-in-Charge.Note : Two runs of 4sqmm PVC insulated cable and one run of 4sqmm cable and one run of PVC conduit shall be measured as one unit length.Make of Cable-Anchor/ havells/finolex /Polycab/Plaza of ISI mark as approved by GEMake of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme |
| 83 | Supply and fix isolator TPN, 100 Amps, 415 volts,10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge.Make : Legrand / L&T / Havells / ABB / Siemens / Schneider |
| 84 | Supply and fix MCB DP, 32 Amps, 240 volts,10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge.Make : Legrand / L&T / Havells / ABB / Siemens / Schneider |
| 85 | Supply and fix MCB SP, 6 to 32 Amps, 240 volts,10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge.Make : Legrand/ L&T / Havells / ABB / Siemens / Schneider |
| 86 | Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.5 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavaion and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Supply and fix 100 watts LED high bay light fitting(asjustable type using hook/ cradle mounting options), 240 volts, 50Hz, AC supply complete with all accessories internally prewired and including electrically connection with cable of size 0.5 Sqmm (nominal area) including hanging arrangments and taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat part No BY515P LED150S , Syska Cat Part No : UFO-E HI-BAY 100W and Bajaj Cat part No BGHBM 100WLED XE or equivqlent in Shakti/Wipro |
| 88 | Supply & Fix wall mounted farrata fan with powder coated guards and blades of approved colour, heavy duty, metal body, AC single, phase, 23 volts, 50 Hz, 1440RPM, 600mm sweep with adjustable vertical angles, & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete all as specified and directed by Engr-in-charge. Make : Havells/ Almonard/ Bajaj/ Khaitan as approved by GE Please Enable Macros to View BoQ information |
