|
| 1 | Excavating in trenches manually not exceeding 1.5m wide and not exceeding1.5 mtr in depth/ width for laying under ground GI/ DI/ PPR Pipe/ foundations and getting out in soft / loose soil all as specified and directed. Note: During excavation no mechanical excavator is permitted. |
| 2 | Returning, filling in incl spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed. |
| 3 | Removing excavated soil to a distance not exc 50 mtr and deposited where directed at a level not exceding 1.5 mtr above the starting point all as specified and directed. |
| 4 | M&L for dismantling / taking out / taking down the unsv. corroded galvanized steel tubes of 50mm bore including all fittings (such as bends, elbows, tees, short pieces, connectors, tank connectors, back nuts, diminishing pieces, plugs, unions & flanges etc.) and removing from site for replacement or relaying all as specified and directed by Engr-in-Charge. |
| 5 | All as per serial item No. 4.00 here in above but 20 mm dia. |
| 6 | All as per serial item No. 4.00 here in above but 25 mm dia. |
| 7 | All as per serial item No. 4.00 here in above but 40 mm dia. |
| 8 | M&L for cleaning of dismantled serviceable Galvanized steeI tubes of 50mm bore by bamboo stick, wire brush, descaling chemicals and relaying the same including replacement of all fittings (such as bends, elbows, tees, short pieces, connectors, tank connectors, back nuts, diminishing pieces, plugs, unions & flanges etc.) and fixed to wall / floors complete all as specified and directed. |
| 9 | All as per serial item No. 8.00 here in above but 40 mm dia. |
| 10 | All as per serial item No. 8.00 here in above but 20 mm dia. |
| 11 | All as per serial item No. 8.00 here in above but 25 mm dia. |
| 12 | Relaying of galvanized steel tubes 50 mm bore medium grade including all fittings (such as bends, elbows, tees, short pieces, connectors, tank connectors, backnuts, diminishing pieces, plugs, unions & flanges etc.) and laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 13 | All as per serial item No. 12.00 here in above but 20 mm dia. |
| 14 | All as per serial item No. 12.00 here in above but 25 mm dia. |
| 15 | All as per serial item No. 12.00 here in above but 40 mm dia. |
| 16 | S&F galvanized steel tubes 50mm bore medium grade including all fittings (such as bends, elbows, tees, short pieces, connectors, tank connectors, back nuts, diminishing pieces, plugs, unions & flanges etc.) and laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 17 | All as per serial item No. 16.00 here in above but 20 mm dia. |
| 18 | All as per serial item No. 16.00 here in above but 25 mm dia. |
| 19 | All as per serial item No. 16.00 here in above but 40 mm dia. |
| 20 | S&F galvanized steel tubes of 50 mm bore medium grade including all fittings (such as bends, elbows, tees, short pieces, connectors,tank connectors, backnuts, diminishing pieces, plugs, unions & flanges etc.) and fixed complete to surfaces through MS clamp complete (as required) all as specified and directed by Engr-in-Charge. |
| 21 | All as per serial item No. 20.00 here in above but 20 mm dia. |
| 22 | All as per serial item No. 20.00 here in above but 25 mm dia. |
| 23 | All as per serial item No. 20.00 here in above but 40 mm dia. |
| 24 | Taking out and removing Unserviceable Gate valve/stop valve of water supply lines of size 50 mm dia, closing the opening with plug etc. or preparing for new fixing as required including necessary fitting complete all as directed. |
| 25 | All as per serial item No. 24.00 here in above but 20 mm dia. |
| 26 | All as per serial item No. 24.00 here in above but 25 mm dia. |
| 27 | All as per serial item No. 24.00 here in above but 40 mm dia. |
| 28 | Supply and fix brass Globe or Gate valve of size 50 mm dia with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete all as specified and directed. |
| 29 | All as per serial item No. 28.00 here in above but 20 mm dia |
| 30 | All as per serial item No. 28.00 here in above but 25 mm dia |
| 31 | All as per serial item No. 28.00 here in above but 40 mm dia |
| 32 | M&L for boring under roads without disturbing the top surface of the road for passing required size pipe of complete all as specified and directed by Engr-in-Charge |
| 33 | Cutting existing CI/DI/PP-R pipe in position for insertion of new pipe/tees, branches etc. of 150 mm dia |
| 34 | All as per serial item No. 33.00 here in above but 100 mm dia |
| 35 | All as per serial item No. 33.00 here in above but 80 mm dia |
| 36 | Cutting existing galvanised iron pipe of sizes 50 mm dia in position for insertion of new pipe/tees, branches etc. |
| 37 | All as per serial item No. 36.00 here in above but 20 mm dia |
| 38 | All as per serial item No. 36.00 here in above but 25 mm dia |
| 39 | All as per serial item No. 36.00 here in above but 40 mm dia |
| 40 | Dismantling /taking out/taking down the unsv /corroded/ galvanized steel/mild steel/cast iron tubes of 100 mm bore including all fittings and removing from site all as specified and directed. |
| 41 | Dismantling /taking out/taking down the unsv /corroded/ galvanized steel/mild steel/cast iron tubes of 150 mm bore including all fittings and removing from site all as specified and directed. |
| 42 | Dismantling /taking out/taking down the unsv /corroded/ galvanized steel/mild steel/cast iron tubes of 80 mm bore including all fittings and removing from site all as specified and directed. |
| 43 | Supply and laying of 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size OD 110 mm dia |
| 44 | Supply and laying of 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size OD 160 mm dia |
| 45 | Supply and lay of 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size OD 75 mm dia |
| 46 | S&F sluice valves 80 mm dia PN 1.6 (Conforming to IS:14846L(2000) having brass spindle , should be fixed on existing GI/CI pipe line through leather gasket of suitable thickness incl, taking down old unserviceable one all as specified and directed. |
| 47 | S&F sluice valves 100 mm dia PN 1.6 (Conforming to IS:14846L (2000) having brass spindle , should be fixed on existing GI/CI pipe line through leather gasket of suitable thickness incl, taking down old unserviceable one all as specified and directed. |
| 48 | S&F sluice valves 150 mm dia PN 1.6 (Conforming to IS:14846L(2000) having brass spindle , should be fixed on existing GI/CI pipe line through leather gasket of suitable thickness incl, taking down old unserviceable one all as specified and directed. |
| 49 | M&L for dismantling / taking down cross-arms of M.S. channel or angle sections / pit cover etc. complete and setting a side for taking credit complete all as specified & directed. |
| 50 | M&L for Construction of brick masonry valve pit of internal dimension 90cm x90 cmx120 cm depth including necessary excavation and earth work in soft/loose soil, with sub class 'B' bricks, built in cement mortar (1:4), PCC (1:4:8) type D2 (Using 40 mm graded stone aggregate) as in foundation, 75mm thik PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in concrete floor and PCC (1:2:4) type B1 (using 20 mm graded stone agreegate ) as in coping and 12mm thick rendering all over with integral W.P.C @ 2% by weight of cement with and including MS Frame with 40X40 x6 mm angle iron, 3.15 mm thick MS Sheet cover plate with appropriate size lifting handles and locking arrangments 01 No 50 mm size 4 levers lock with keys in duplicate including painting of steel iron surface with two coats of synthetic enamel paint over one coat of red oxide primer includiing preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr complete all as specified and directed. |
| 51 | All as per item No 50.00 here in above but valve pit of size 90x90x90 cm complete all as specified and directed by Engr -in-charge. |
| 52 | All as per item No 50.00 here in above but valve pit of size 60x60x60 cm complete all as specified and directed by Engr -in-charge. Please Enable Macros to View BoQ information |
