|
| 1 | Providing, erecting, Commissioning and Testing of VT Pumps at Raw Water Works, Kolar Dam, Saoner |
| 2 | Providing, erecting, commissioning and testing of Vertical Turbine self water lubricated pump capable of discharge at the rate of 95 Cum per Hour of water at duty point head of 34.60 meter with head range between 26 to 39 mtr with 15 mtrs long 150 mm x 40 mm size Flanged Column Assembly manufactured from ERW Seamless Steel 10 mm thick, including Bowl Assembly & Strainer in 1.5 mtr section, including CF8M Impeller & Neck Ring, SS410 Shafts, Bowl Assembly, CI / MS Discharge Head, SS STrainer & SS Fasteners, tc complete. |
| 3 | Providing, erecting, commissioning and testing Vertical Hollow Shaft Squirrel Cage induction motor of 15 KW / 20 HP, 4 pole, , TEFC, Efficiency Class : IE3, Class \\"F\\" insulation, IP 55 protection (IS:4691) suitable to operate on 3 phase 440 volts 50 Hz 1450 rpm A.C.Supply with 3 Nos PTC Thermistors etc complete with terminal box suitable for 2 Nos. of 4 core 16 Sq.mm 1.1 KV PVC armoured cable & confirming to IS:12615 etc complete. |
| 4 | Providing, erecting , commissioning and testing at site of installation LT switchgear panel cum APFC panel, cubical type, MS sheet fabricated from 14 gauge CRCA sheet including all accessories, switchgear, Copper busbar, foundation channel of cubical type LT panel board consisting of 1 Nos. incoming and 5 Nos. of out going feeder and consisting of suitable rating switch gears and suitable protections, metering etc. and 20 HP fully automatic star delta starter with contactors with all standard accessories for 20 HP motors including all materials, Labours, tools and tackles. The details list of material required for L.T. Starter panel are mentioned in itemwise specification consist of material quantity and make. |
| 5 | Plate, Pipe type Earthing (EA-EP) |
| 6 | Supplying, installing and testing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm withfunnel with a wire mesh for watering and brick masonry block C.I. cover complete with all accessories of G.I. materials & recording the results as per specification no. EA-EP |
| 7 | Accessories |
| 8 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP. |
| 9 | LT Cables (Aluminum) (CB-LT/AL) |
| 10 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall / trusses / pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 11 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT/AL |
| 12 | C.C. Foundation |
| 13 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose) |
| 14 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) |
| 15 | (a) Without by pass arrangement -PN -1 |
| 16 | 6) 150 mm. |
| 17 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 18 | (a) Sluice valves - PN -1 (Without by pass) |
| 19 | 6) 150 mm. |
| 20 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.).... |
| 21 | (a) Lowering,laying and jointing in position following C.I. D/F Reflex valves, Butterfly valves and Sluice valves |
| 22 | 6) 150 mm. |
| 23 | Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. |
| 24 | (a) Kinetic Air Valve Flanged Type - PN -1 |
| 25 | 1) 40 mm. |
| 26 | Dismantling Joints |
| 27 | (1) Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia. |
| 28 | (2) 150 mm dia Joint |
| 29 | Providing & fabricating MS Main Header 10 mm thick and 200 mm dia & MS delivery lines of 10 mm thick 150 mm dia. up to the main header including necessary fabrication work such as cutting, welding, required M.S. flanges of 25 mm thick with all material, labour etc complete. |
| 30 | Plumbing Accessories |
| 31 | Supplying and erecting 0-100 each lb/sq.inch pressure gauge having 4\\" dia. complete with socket for 1/2\\" GI pipe complete. |
| 32 | Chain Pulley Block |
| 33 | (1) Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. |
| 34 | (1) 1 Tonne Capacity |
| 35 | Travelling Trolley |
| 36 | (1) Providing, erecting Travelling Trolley of capacity as below with 6 m lift, tested to 50% over load |
| 37 | (1) 1 Tonne Capacity |
| 38 | Fire Extinguishers |
| 39 | (1) Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. |
| 40 | Supplying rubber matting and required length and breadth with good insulation property for 11 kV. |
| 41 | (a) 3mm thick |
| 42 | Credit for Dismantled Material |
| 43 | PVC armoured/unarmoured cables and wires (Copper) |
| 44 | H.G. / M.S. / G.I. Materials / Poles etc. |
| 45 | Copper / Brass materials |
| 46 | I.C. / M.C. switches / D.P. / D.B. / T.P. / feeder pillar etc. |
| 47 | Meters (Ammeter / Voltmeter / Energy meter / All types of PCB etc..) |
| 48 | Electric motors |
| 49 | Water pump sets. Please Enable Macros to View BoQ information |
