|
| 1 | Part A- 3x4x4 m span Box CulvertEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material..Reference to MORT&H Specification 304 Sr No.15.01 (Excluding GST) |
| 2 | Plain Cement Concrete M-15 in Open Foundation complete as per Drawing and Technical Specifications.Reference to MORT&H Specification1500, 1700 & 2100 Sr No.15.11 (Excluding GST) |
| 3 | Plain Cement Concrete (M-20) in Open Foundation complete as per Drawing and Technical Specifications. (Excluding GST) |
| 4 | Reinforced Cement Concrete (Grade M30) in Open Foundation complete as per Drawing and Technical Specifications.Reference to MORT&H Specification 1500, 1700 & 2100 Sr No.15.11 (Excluding GST) |
| 5 | Reinforced Cement Concrete (Grade M30) for wall & slab etc. complete as per Drawing and Technical Specifications..Reference to MORT&H Specification 1500, 1700 & 2100 Sr No.15.12 (Excluding GST) |
| 6 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation/Wall/Slab complete as per Drawing and Technical Specifications. Reference to MORD Specification 1600 Sr No.15.13 (Excluding GST) |
| 7 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Reference to MORT&H Specification 2706 & 2200 Sr No.15.14 (Excluding GST) |
| 8 | Drainage Spouts complete as per drawing and Technical specification. Reference to MORT&H Specification 2705 Sr No.15.17 (Excluding GST) |
| 9 | Providing and laying Cement concrete wearing coat M-35 grade including reinforcement complete as per drawing and Technical Specifications Reference to MORT&H Specification Sr No.15.18 (Excluding GST) |
| 10 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification Reference to MORT&H Specification710.1.4.of IRC:78 & 2200 Sr No.13.9 (Excluding GST) |
| 11 | Part B- Approach roadConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (Excluding GST) |
| 12 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per clause 401. (Excluding GST) |
| 13 | Providing, laying, WBM Grade-2 with 45-63mm size Stone Ballast, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled smooth roller 8-10 tonnes in stages to proper grade and camber, applying and brooming, stone screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per clause 405.2 (Including all taxes required & i/c hire charges of road roller) (Excluding GST) |
| 14 | Providing, laying, WBM Grade-3 with 22.4-53mm size Stone Ballast, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled static roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 3 as per clause 405.3 (Including all taxes required & i/c hire charges of road roller) (Excluding GST) |
| 15 | Brick edging on both sides of the road of first class bricks 8 cm (3\\") wide and 12 cm. 4½\\"deep laid with mud mortar including labour and supply of. bricks finished to required template and proper alignment and also including dressing and ramming the cavated earth as directed by Engineer-in-Charge (Excluding GST) |
| 16 | Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (Excluding GST) |
| 17 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Excluding GST) |
| 18 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. (Excluding GST) |
| 19 | Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. (Excluding GST) |
| 20 | (Construction of subgrade and Earthen shoulders)Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Excluding GST) |
| 21 | Part C- Protection workProviding and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Reference to MORT&H Specification 2503 Sr No.16.01 (Excluding GST) |
| 22 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Reference to MORT&H Specification 2504 Sr No.16.05 (Excluding GST) |
| 23 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.Reference to MORT&H Specification 2504 Sr No.16.04 (Excluding GST) |
| 24 | Part D- DiversionSupply and laying of 1000 mm NP-3 hume pipe. including cost of all materials, loading, unloading etc. (Excluding GST) |
| 25 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.Reference to MORT&H Specification 305 Sr No.3.16 (Excluding GST) |
| 26 | First class brick on edge floor laid dry joint sand filled including preparation of baseto proper slope and its ramming and including supply of all materials, labour and T&P etc. required for proper complition of the work. (Excluding GST) Please Enable Macros to View BoQ information |
