|
| 1 | Safe carriage of the following material from Store Centre to work site including loading and unloading at both ends :- |
| 2 | 13 Mtr./11 Mtr./9 Mtr./8.5 Mtr. Long PCC/ST Poles. |
| 3 | ACSR Weasel/Dog Conductor. |
| 4 | 11/0.4 10 KVA Transformers. |
| 5 | 11/0.4 25/63/100 KVA Transformers. |
| 6 | LT A.B.C. Cable. |
| 7 | 11 KV XLPE cable of size 3x70 sq.mm./ 3x120 sq.mm./ 3x185 sq.mm. etc. |
| 8 | Line material such as Cross-Arms, Pin Insulators, Guarding Angles, Guarding Wire, Disc Insulators and Cable Jointing Kits etc. |
| 9 | CT/PT Unit |
| 10 | 11 KV Fuse Set |
| 11 | 11 KV pilfer proof metering cubical. |
| 12 | Dismantling of the line by :- |
| 13 | Removing of ACSR Weasel/Dog conductor from all phases on line, making bundle and stacking at a safe place. |
| 14 | Uprooting of 13 Mtr./11 Mtr./9 Mtr Long ST Poles. |
| 15 | 11 KV CT/PT |
| 16 | For 11 KV/LT Line, Single support 13/11/9/8.5 Mtr. long ST/PCC Poles :- Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. Erection of single pole support complete with fixing of 11 KV V-Type cross-arms and all other accessories by providing stone pad, holding clamps, f-bracket and nuts & bolts etc. as per RESPO Norms. |
| 17 | For 11 KV Line, Double Pole structure with 13/11/9/8.5 Mtr. long ST/PCC Poles :- Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole). Erection of support (pole) complete work by fixing of D.P. Clamps and all other accessories. The work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per RESPO Norms. |
| 18 | Grouting of Poles Single line support :- Grouting of support in CC 1:4:6 (cement, sand and 40 mm. brick ballast) Grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per RESPO Norms. |
| 19 | Grouting of stay rods (20x1800mm.) including all works of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:6 (cement, sand and 40 mm. brick ballast) including back filling of soil and proper ramming etc. |
| 20 | Fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc. |
| 21 | Earthing of support with MS Earth Rod of (20x2500)mm. long including excavation of pit and driving MS Rod 3.0M apart from support and 0.5M below the ground level and connecting below the earth electrodes with the help of G.I. Wire 6 SWG tightening with nuts and bolts. |
| 22 | Laying, sagging, stringing and binding of ACSR Weasel/ Dog Conductor with all other accessories on pole as per RESPO Norms. |
| 23 | Laying, sagging, stringing and binding of ABC Conductor with all other accessories on pole as per RESPO Norms. |
| 24 | Laying of 11 KV XLPE Cable of size 3x70 sq.mm./ 3x120 sq.mm./ 3x180 sq.mm. and making connections as per RESPO Norms. |
| 25 | Filling of 11 KV outdoor/indoor type cable jointing kits as per RESPO Norms. |
| 26 | Construction of 11 KV Underground Line :- |
| 27 | Digging of cable trench in size of 0.45Mtr.x1.05 Mtr. |
| 28 | Laying of 11 KV 3x70/120/185 sq.mm. cable in the trench. |
| 29 | Providing 150 mm. sand cushion beneath and 150 mm. above the cable. The cable shall be duly protected by 1st Class Bricks, two on either side and third on top of the cable, laid in the series one after the other. |
| 30 | Refilling and ramming of the left out soil, closing the trench and levelling. Spare cable shall be left in the loop shape at both ends, including providing of all required material and T&P. |
| 31 | Providing and fixing of Danger Board with clamp, nut and bolts. |
| 32 | Providing and fixing of Number Plate with clamp, nut and bolts. |
| 33 | Providing and wrapping of barbed wire on 11 KV PCC Poles at a height of 2.75 Mtr. from the ground level as per RESPO Norms. |
| 34 | Fitting of 11 KV Pilfer proof metering cubical including making proper connections. |
| 35 | Guarding of 11 KV Line with G.I. wire as per RESPO Norms. |
| 36 | fixing of 11 KV Fuse Set as per RESPO Norms. |
| 37 | fixing of TPMO as per RESPO Norms. |
| 38 | Mounting and fixing of 11 KV CT/PT Unit on double pole including making proper connections. |
| 39 | Mounting and fixing of 10 KVA transformer on pole including making proper connections. |
| 40 | Mounting and fixing of 25/63/100 KVA transformer on double pole including making proper connections. |
| 41 | Providing G.I. Pipe 6” dia for inserting 11 KV XLPE cable for safety of cable on Single/Double Pole by providing and fixing of MS Clamp, Nuts and Bolts. |
| 42 | Fixing and fitting of single/three phase distribution box on pole for making consumers cable connection complete work. |
| 43 | Fixing of all type clamp for LT and HT as per Respo norms. |
| 44 | Providing and fixing of HDPE Pipe providing and fixing of MS Clamp, Nuts and Bolts. |
| 45 | Providing and fixing of LT Fuse Box with fuse wire and fixing of MS Clamp, Nuts and Bolts. |
| 46 | Providing and painting of Aluminum/Red oxide Paint. |
| 47 | Carriage of following from work site to Store Centre including loading and unloading at both ends :- |
| 48 | 13 Mtr./11 Mtr./9 Mtr. Long ST Poles. |
| 49 | ACSR Weasel/Dog Conductor/M.S. Scrap. |
| 50 | CT/PT Unit. |
| 51 | 11 KV pilfer proof metering cubical/ Old and used Damaged TF 10,25,63,100 KVA Please Enable Macros to View BoQ information |
