Tender For Investigation And Survey (On Gis Basis) Of The Project Area Including Soil Investigation, Engineering Design (Hydraulic And Structural) As Required, Procurement Of All Labour & Material, T&P Etc. And Construction Of Various Components Comp, Najibabad-Uttar Pradesh

TDR : 54939958

Tender Notice
BOQ

31 Days Left

Najibabad , Uttar Pradesh

Tender Brief : Tender For Investigation And Survey (On Gis Basis) Of The Project Area Including Soil Investigation, Engineering Design (Hydraulic And Structural) As Required, Procurement Of All Labour & Material, T&P Etc. And Construction Of Various Components Comp

Document Fees
₹ 23600 /-

EMD
₹ 2829000.0 /-

Tender Value
₹ 28.28 Crore /-

Submission Date
04-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Design, Construction, Supply of all materials, Erection and Commissioning of co treatment facilities (11.1 MLD STP cum 24.0 KLD FSTP) with all the civil, electrical , mechanical, instrumentation and scada system, LT/HT panel, sub station building, DG set foundation, admin buidling, laboratories, meter room and campus development [Construction of Internal Road (CC Road, 3.5m wide, area approx 1500sqm.), staff quarters as per requirement and specification, external water supply (20KL tank including tube well and pumping arrangement, electrification & street llighting and sanitation work) etc. all complete for STP with co-treatment facilities. STP shall be based on SBR Technology. The effluent quality for agricultural uses (PH-6.5 TO 8.3, SS-30 mg/l, Oil&Grease-10 mg/l, BOD-10mg/l) , COD-30 mg/l , Residual chlorine-nil , TKN-10mg/l, Nitrate N-10 mg/l, F.C.-230 MPN/100 ml, Dissolved P-5 mg/l (preferable 2 mg/l). ) shall be maintained as per CPHEEO manuals. Latest NGT norms for effluent discharge shall be adhered. The cost of MPS (Civil and E&M works) and treated effluent pipe are included in this estimate.
2	Civil works
3	RCC retaining wall of ht. 1.8m above GL (length 150m)
4	Construction of Boundary Wall 2.0m ht. with wirefencing (additional) above plinth level with RCC Column @3m c/c with plinth beam and foundation avg. 1.2m depth including reinforcement and RCC coping on top of wall with plaster (1:4) and painting (apex painting 3 coat) as per type design and drawing at the STP site
5	MS gate (3.6m wide with wicket gate)
6	Excavation below G.L. upto depth as specified for laying sewer and manhole ordinary soil (earth, sand, loam and clay) including cutting of joints pits ramming dressing) leveling, refilling of trenches in 20 cm layer watering and ramming the same including
7	(a) 0.00 to 1.50 m
8	(b) 01.50 to 03.00 m
9	(c) 03.00 to 04.50 m
10	(d) 04.50 to 06.00 m
11	Provide and fix close timbering in trenches for the depth as specified below G.L. consisting of 40 mm thick approved country wood plank for polling board 125 x 75 mm eucalyptus-Safeda-Sal Wood wallers and 100 mm dia ballies for shuttering at 1.5 m C/C including all labour etc , complete
12	(a) 0.00 to 3 m
13	(b) 03.00 to 06.00 m
14	Same as item No. 2 but for open timbering (No timbering for depth below 1.50m)
15	(a) 1.50 to 03.00 m
16	Supply of following sizes of RCC spigotted and socketed non pressure pipes( Dia. In mm ) with structural strength as per IS 458 : 2003 and its latest amendment(s).NP3
17	300 mm dia pipe
18	350 mm dia pipe
19	400 mm dia pipe
20	450 mm dia pipe
21	500 mm dia pipe
22	600 mm dia pipe
23	700 mm dia pipe
24	800 mm dia pipe
25	900 mm dia pipe
26	1000 mm dia pipe
27	Laying, Jointing of following sizes of R.C.C. Hume pipe NP3 Class Socket / spigot rubber ring jointing and specials from store to the work lowering and laying the same in to the trenches upto depth as specified below G.L. true to alignment
28	300 mm dia pipe
29	00.00 - 0 1.50 m
30	01.50 - 0 3.00 m
31	03.00 - 04.50 m
32	350 mm dia pipe
33	03.00 - 04.50 m
34	400 mm dia pipe
35	00.00 - 0 1.50 m
36	03.00 - 04.50 m
37	04.50 - 06.00 m
38	450 mm dia pipe
39	03.00 - 04.50 m
40	500 mm dia pipe
41	04.50 - 06.00 m
42	600 mm dia pipe
43	01.50 - 0 3.00 m
44	04.50 - 06.00 m
45	700 mm dia pipe
46	01.50 - 0 3.00 m
47	03.00 - 04.50 m
48	04.50 - 06.00 m
49	800 mm dia pipe
50	03.00 - 04.50 m
51	04.50 - 06.00 m
52	900 mm dia pipe
53	04.50 - 06.00 m
54	1000 mm dia pipe
55	04.50 - 06.00 m
56	Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm gauge approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for the proper completion of work.
57	(a) 00.00 to 01.50 m
58	(b) 01.50 to 03.00 m
59	(c) 03.00 to 04.50 m
60	(d) 04.50 to 06.00 m
61	Filling granular material (well graded crushed rock or gravel maximum size 20mm) into the trenches for class B bedding (granular bedding) including watering compaction, labour T&P etc. for completion of work. (As per statement)
62	(b) 01.50 to 03.00 m
63	Supply (excluding cartage) of granular material (well graded crushed rock or gravel of maximum size 20mm) for class B bedding (granular bedding)
64	Construction of circular type brick masonry HD (HD20) manhole (with Extra Heavy Duty type manhole cover) with top slab made of cement concrete 1:1.5:3 with graded granite stone aggregate (12 mm nominal size), wall made of brick masonry using 1st class bricks having crushing strength between 100 to 149 kg/cm² in cement mortar 1:4 inside plastering 12 mm thick 1:4 finished smooth with neat cement, pinning, outside plaster 1:4 and making channels with cement concrete 1:2:4 graded granite stone aggregate (12 mm nominal size) complete as per specifications.
65	900mm internal dia., 1.65m deep
66	1200mm internal dia., 3.30m deep
67	1500mm internal dia., 4.95m deep
68	1800mm internal dia., 9.0 m deep
69	Extra for every additional depth of 1 m or part there of in following size of circular manholes.
70	900mm internal dia., 1.65m deep
71	1200mm internal dia., 3.30m deep
72	1500mm internal dia., 4.95m deep
73	1800mm internal dia., 9.0 m deep
74	Dismantling/Cutting of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
75	Bituminous road
76	Concrete road
77	Interlocking tile road
78	Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
79	Bituminous road
80	Concrete road
81	Interlocking tile road
82	Tack & SDBC Coat on existing BT Road (remaining area after reinstatement)
83	Provision for laying of sewer by trenchless technology Supply of MS pipe (As per IS:3589 made from steel confirming to IS:2062), with anti corrosive treatment with P.U. coating
84	600 mm dia pipe,10mm Pipe Wall Thickness
85	700 mm dia pipe,12mm Pipe Wall Thickness
86	Installation of product pipe by HDD method including preparing and setting up the plants and equipement, preparing new pipe work material, installation new pipe-work and commissioning system or making the system ready for commissioning by HDD operation including, all related civil and mechanical works like excavation, shoring/strutting, etc. drilling, stringing, reaming, and pulling back the new pip-work on the designed bore path alignment, proper disposal of drilling fluid, and back fill of site after completion all inclusive as per IndSTT:101:2018: Code of prectice of HDD Technique Suiting Indian Conditions. (depth up to 6m. (INDSTT 2023)
87	700 mm dia pipe
88	Providing and erecting temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes hiring of Ballies and arrangement for traffic diversion such as traffic signals during construction at site as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). The rate is for unit length of pipe laying.
89	Disposal of Surplus Earth
90	I&D structure with 1 gate across the Drain and 1 gate at the diversion pipe inlet)
91	Cnstruction of IPS as per specification, accesory building & design approved by Engineer in Charge
92	IPS-1 - 6.72 MLD
93	IPS-2- 5.52 MLD
94	Rising Main
95	Clearing jungle including uprooting of rank vegitation, grass, brush wood trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared.
96	Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.
97	0.0 to 1.5 mtr. Depth
98	Pipes conforming to IS : 8329 - 350 mm including Supply and laying standard specials etc. all complete Up to 400 mm dia
99	Pipes conforming to IS : 8329 - 300 mm including Supply and laying standard specials etc. all complete Up to 300 mm dia
100	Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid extra (350mm dia) UPJN (2448) & Qtn
101	Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid extra (300mm dia) UPJN (2448) & Qtn
102	Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete
103	150 mm
104	Laying, jointing, carting of 350mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc.
105	Laying, jointing, carting of 300mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc.
106	Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, with cast insitu RCC slab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10 shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. (Refer 10.4 for Unit Cost Estimate)
107	Sluice valve, Air valve chambers
108	Dismantling/cutting of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
109	B.O.E road
110	Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
111	B.O.E road
112	Proposal for supply of 1500 Ltr Capacity Sewer Suction Machine mounted on TATA 407 Gold/2900 WB Truck Chassis, RTO, Insurance and transpoaton upto destination are included in the cost.
113	Proposal for supply of 2000 Ltr Capacity Sewer Suction Machine mounted on TATA 407 Gold/2900 WB Truck Chassis.
114	E&ME./M. Works at IPS-1Electrical Works
115	H.T.Panel( Comprising with 1 -I/C and 2 -O/G. (SITC of Indoor Type Floor mounted HT Panel with 11 KV, 630 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details-
116	Supply installation testing and commissioning of only TTA Incoming Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturer's own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator.
117	Supply Installation Testing and Commissioning of only TTA Outgoing Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturer's own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC)
118	Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc.
119	3 core X 120 sq.mm. armored HT Cable (From HT Panel to Transformers)
120	SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm)
121	11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV
122	Transformer: 160 KVA with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of 160 KVA rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C , ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect.
123	L.T. Panel ( ONLY TTA PANEL)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming MCCB panels and 1 No outgoing MCCB panel, each consisting of following items -(i) 4 pole MCCB with thermal magnetic release, 250 A, 25 KA with adjustable short circuit and over load setting- 1 No.(ii) C.Ts of suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi) Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 160 A current rating, 25 KA short circuit breaking capacity With Microprocessor based release with adjustable adjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Sett (D) 3 Nos. outgoing panels for miscellaneous works, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F)4 pole MCCB with thermal magnetic release, 250 A, 25 KA with adjustable short circuit and over load settingfor DG sets incoming - 1 NO (G) Bus coupler arrangement in panels
124	LT Cable laying and jointingPower and control cable-Supply of 150 sq. mm 3.5 core cable - 1 Run required for power from each Transformer to each L.T. panel , 95 sq. mm X3 core-1 run cable for power from starters to 30 KW Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation system etc. complete in all respect.
125	EarthingPlate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge.
126	Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B 'class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earthresistance for value of 5 ohms or less as required & must record byengineer in charge during site visit and ensure to enter in measurmentbook.All as per pre approved by Engineer in charge.
127	Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing)
128	Charges of Electrical safety Clearance
129	Expenditure on B&L Form, Challan etc.
130	Proper fencing of substation portion as per I.E. rules.
131	STARTER PANELSITC of Compraising of Variable Frequency Drive suitable to meet the basic requirement of motor protections and suitable to run 40 HP motor (To be fixed in composite panel of LT Panel)- Ref. UP Jal Nigam E&M SOR, 2020
132	Mechanical Works PumpsThe submersible non clog pumpset should be single stage having two vanes enclosed impeller coupled with submersible motor of 40 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 4550 lpmTotal Head= 22 MSpeed=980Quantity of pumps.Guid Rail SystemGuide rail system (Automatic coupling system) for 40 HP submersible pump sets complete for above pump set. - 4 SetsLifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle - 4 Sets
133	Main piping and Valves.200 mm dia delivery for pumps , 300 mm dia common header line.Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable waterMaterial of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS
134	Motor Operated Sluice Valve 200 mm dia
135	Motor Operated Sluice Valve 300 mm dia
136	Reflux valve 200 mm dia N.B
137	PipingsNote : Regarding the size of pipes, Tee, Bend etc, contractor is required to designed them self and may got it approved by the department before execution of works along with layout drawing
138	200 mm, K9 delivery pipes for pumping plants
139	300 mm, K9 common header pipes
140	Specials like bend, tee, D Joint etc.
141	Nut Bolt, Washer Rubber packing etc
142	INSTALLATION, TESTING & COMMISSIONING
143	Installation & Commissioning of all Pump set,Piping & Valves as mentioned in above
144	Level Transmitter (For Hi-Lo cut-off & alarms)
145	SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display.
146	Electro magnetic flow meter
147	SITC of CE/UL certified 300 mm dia Electro magnetic flow meter suitable to measure 0 to 30 MLD flow to be fitted in 300 mm dia main header line.
148	E.O.T. Crane
149	SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block.
150	Chequerred plate and guards
151	SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm.
152	PAINTING
153	Painting of all pumps piping and valves with two coat enamel paint.
154	LIGHT WIRING & Electrification
155	Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan
156	Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan
157	IPS Campus with Solar Panel and LED Light
158	D.G. SET AND ACCESSORIES
159	SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 160 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design.
160	Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required.
161	Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required.
162	Supply & Laying 50 mm X 6mm size GI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.
163	Providing and Laying cable for DG Set to Panel 150 sq mm X 3.5 core x 1 run( armored aluminium ).
164	Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 150 sq mm.
165	SCREENS AND GATES:
166	Rising type thimble mounted CI Sluice Gates of reputed make at IPS
167	Stainless steel Manual Screen with bar size 50 mm x 10 mm. Gaping between bars should be 20 mm. there should be atleast 1 stainless steel punji for cleaning purpose.
168	Packing and Frieght @ 3% of ( 25,26 )
169	Installation, Testing and Commissioning @ 10% of 25,26
170	AUTOMATION OF IPS
171	CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places.
172	GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
173	CE/UL certified intelligent Smart Energy Meter
174	Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1)160 AMP rating
175	Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator.
176	CE/UL Certified Surge protector for control panel.
177	CE/UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters.
178	Security Survillance IP Camera with recorder
179	Installation, commissiong & testing of above automation work
180	Trial run of automation work for 3 month period for IPS
181	Three month Expenditure on Operator (IPS-1) in 3 Shift
182	Diesel Consumption During Trial and Run Period (IPS-1)
183	E./M. Works at IPS-2 Electrical Works
184	L.T. Panel ( ONLY TTA PANEL)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming MCCB panels and 1 No outgoing MCCB panel, each consisting of following items -(i) 4 pole MCCB with thermal magnetic release, 160 A, 25 KA with adjustable short circuit and over load setting- 1 No.(ii) C.Ts of suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi) Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 125 A current rating, 25 KA short circuit breaking capacity With Microprocessor based release with adjustable adjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Sett (D) 3 Nos. outgoing panels for miscellaneous works, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F)4 pole MCCB with thermal magnetic release, 160 A, 25 KA with adjustable short circuit and over load settingfor DG sets incoming - 1 NO (G) Bus coupler arrangement in panels
185	LT Cable laying and jointing
186	Power and control cable-Supply of 95 sq. mm 3.5 core cable - 1 Run required for power from each Transformer to each L.T. panel , 50 sq. mm X3 core-1 run cable for power from starters to 25 HP Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation system etc. complete in all respect.
187	Earthing
188	Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessorieslike nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer incharge.
189	Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earthresistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.
190	Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing)
191	Charges of Electrical safety Clearance
192	Expenditure on B&L Form, Challan etc.
193	STARTER PANEL
194	SITC of Compraising of Variable Frequency Drive suitable to meet the basic requirement of motor protections and suitable to run 25 HP motor (To be fixed in composite panel of LT Panel)-
195	Mechanical Works PumpsThe submersible non clog pumpset should be single stage having two vanes enclosed impeller coupled with submersible motor of 25 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 3150 lpmTotal Head= 20 MSpeed=980Quantity of pumps.Guid Rail SystemGuide rail system (Automatic coupling system) for 25 HP submersible pump sets complete for above pump set - 4 setsLifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle - 4 sets
196	Main piping and Valves.200 mm dia delivery for pumps , 300 mm dia common header line.Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable waterMaterial of constructionBody-CI,IS-210 grade FG 20Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MSMotor Operated Sluice Valves
197	Motor Operated Sluice Valve 200 mm dia
198	Motor Operated Sluice Valve 300 mm dia
199	Reflux Valve
200	Reflux valve 200 mm dia N.B.
201	PipingsNote : Regarding the size of pipes, Tee, Bend etc, contractor is required to designed them self and may got it approved by the department before execution of works along with layout drawing.
202	200 mm, K9 delivery pipes for pumping plants
203	300 mm, K9 common header pipes
204	Specials like bend, tee, D Joint etc
205	Nut Bolt, Washer Rubber packing etc
206	INSTALLATION, TESTING & COMMISSIONING
207	Installation & Commissioning of all Pump set,Piping & Valves as mentioned in above
208	Level Transmitter (For Hi-Lo cut-off & alarms)
209	SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display.
210	Electro magnetic flow meter
211	SITC of CE/UL certified 200 mm dia Electro magnetic flow meter suitable to measure 0 to 30 MLD flow to be fitted in main header line including reducer etc complete.(Ref. upjn SOR)
212	E.O.T. Crane
213	SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. (Ref. MJP SOR, 2022)
214	Chequerred plate and guards
215	SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm.
216	PAINTING
217	Painting of all pumps piping and valves with two coat enamel paint. (Ref.UP Jal Nigam E&M SOR, 2019)
218	LIGHT WIRING & Electrification
219	Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan
220	Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan
221	IPS Campus with Solar Panel and LED Light
222	D.G. SET AND ACCESSORIES
223	SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 82.5 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design.
224	Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required.
225	Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required.
226	Supply & Laying 50 mm X 6mm size GI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.
227	Providing and Laying cable for DG Set to Panel 95 sq mm X 3.5 core x 1 run( armored aluminium ).
228	Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 95 sq mm.
229	SCREENS AND GATES:
230	Rising type thimble mounted CI Sluice Gates of reputed make at IPS
231	Stainless steel Manual Screen with bar size 50 mm x 10 mm. Gaping between bars should be 20 mm. there should be atleast 1 stainless steel punji for cleaning purpose. (1 working + 1 standby)
232	Packing and Frieght
233	Installation, Testing and Commissioning
234	AUTOMATION OF IPS
235	CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places.
236	GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
237	CE/UL certified intellignet Smart Energy Meter
238	Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1)160 AMP rating
239	Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator.
240	CE/UL Certified Surge protector for control panel.
241	CE/UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters.
242	Security Survillance IP Camera with recorder
243	Installation, commissiong & testing of above automation work
244	Trial run of automation work for 3 month period for IPS-2
245	Three month Expenditure on Operator (IPS-2) in 3 Shift
246	Diesel Consumption During Trial and Run Period (IPS-2)
247	STP ( 11.1 MLD ) And Co Treat ment Plant ( 24 KLD )Design, Supply of all Materials, Erection, Testing,Commissioning and 3 month trial run Of Electrical, Mechanical & Instrumentation Equipments at STP (11.10 MLD ) with all required electrical & mechanical works, PLC/SCADA work, electrification & street lighting work and Online Continuous Effluent Monitoring System (OCEMS) etc. all complete as per tender document for STP.The effluent quality for agricultural uses ( PH-6.5 TO 8.3, TSS<20 mg/l, Oil & Greases -10mg/l, BOD- 10mg/l,COD-30 mg/l,Residual Chlorine-nil, TKN-10mg/l, Nitrate-10mg/l, FC-230MPN/100ml Dissolved P-5mg/l (preferable 2mg/l).) shall be maintained as per CPHEEO mannuals Latest NGT norms for effluent discharge shall be adhered. The rate is Considered for SBR Technology. The STP shall be capable to treat the raw sewage having minimum concentration mentiond in CPHEEO mannual. Firm has to complete Design, Supply, Erection, Testing,Commissioning and 3 month trial run of Substation Work like HT Panel, Transformer & its associated equipments and DG Set Work with AMF Panel with considering load of STP, MPS & Co- Treatment Plant. Design, Supply of all Materials, Erection and Commissioning and 3 month Trial Run of Co-Treatment Plant ( 24 KLD ) having manual screen with-SS 304 with bar size (50 mm x 10mm) and gaping 20 mm, Screw Pumps (4 Kl/h 1W+1S), Screw Press Machine (8 KL/H) with double cylinder having VFD for its operation , 1000 Lit. PVC tank for washing screw press machine. all type pipe and fittings, LT panel and cabling material, Dewatering Pumps (1W+ 1S), 5HP Blower with 12 Nos Diffusers etc complete.)
248	E./M. Works at MPS Electrical WorksH.T.Panel( Comprising with 1 -I/C and 2 -O/G.SITC of Indoor Type Floor mounted HT Panel with 11 KV, 630 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details-Supply installation testing and commissioning of only TTA Incoming Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCB operationg mechanism should be of M2 duty for minimum 10000 mechanical operation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturer's own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. (Included in STP costing) - Set
249	Supply Installation Testing and Commissioning of only TTA Outgoing Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanical operation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturer's own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input, programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch - Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA, KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay) - LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) - 2 Sets (Included in STP costing)
250	Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. 3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) - 60 Meters (Included in STP costing)Trench making and covering of trench in all respect. - 60 Meters (Included in STP costing)SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) - 4 Sets (Included in STP costing)11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV - 2 Sqm (Included in STP costing)
251	Transformer: as per suitable capacity in kVA as per combined load of STP, MPS & Cotreatment Plant with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer as per suitable capacity in kVA as per combined load of STP, MPS & Cotreatment Plant at 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. 02 Nos. (Included in STP costing)
252	L.T. Panel ( ONLY TTA PANEL)
253	SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) from transformers to 2 Nos incoming ACB panels and 1 outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii) C.Ts of suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi) Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay& one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 200 A current rating, 25 KA short circuit breaking capacity With magnetic release with adjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 3 Nos. outgoing panels for miscellaneous works, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incomer- 1 NO (G) Bus coupler arrangement in panels
254	LT Cable laying and jointing
255	Power and control cable-Supply of 400 sq. mm 3.5 core cable - 2Run required for power from each Transformer to each L.T. panel , 185 sq. mm X3 core-1 run cable for power from starters to Motor including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation system etc. complete in all respect.
256	Earthing
257	Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam freelid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensureto enter in measurment book. All as per pre approved by Engineer in charge. Ref.14.3 (PRE BSR 2022)
258	Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurmentbook.All as per pre approved by Engineer in charge. Ref.14.1 (PRE BSR 2022)
259	Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) Ref.E140611 (PRE BSR 2021)
260	Charges of Electrical safety Clearance
261	Expenditure on B&L Form, Challan etc.
262	Proper fencing of substation portion as per I.E. rules.
263	STARTER PANEL
264	SITC of Variabale Frequency Drive , suitable to meet the basic requirement of motor protections and suitable to run 70 HP motor (To be fixed in composite panel of LT Panel
265	Mechanical Works PumpsThe submersible non clog pumpset should be single stage having two vanes enclosed impeller coupled with submersible motor of 70 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 20 Met. cable as offered. (4W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 8900 lpmTotal Head= 20 MSpeed=980Quantity of pumps.Guid Rail SystemGuide rail system (Automatic coupling system) for 70 HP submersible pump sets complete for above pump set. 4 Sets (included in pump rate)Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle - 4 Sets (included in pump rate)
266	Main piping and Valves.Main piping and valves 300 mm dia delivery, 450 mm dia common header line.Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable waterMaterial of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MSMotor Operated Sluice Valves
267	Motor Operated Sluice Valve 300 mm dia
268	Motor Operated Sluice Valve 450 mm dia
269	Reflux Valve
270	Reflux valve 300 mm dia N.B.
271	PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing taking 300mm pipe 40m and 450 mm pipe 15m
272	300 mm, K9 delivery pipes for all six pumping plant
273	450 mm, K9 common header pipes
274	Specials like bend, tee, D Joint etc.
275	Nut Bolt, Washer Rubber packing etc
276	INSTALLATION, TESTING & COMMISSIONING
277	Installation & Commissioning of all 4 Nos. Pump set,Piping & Valves as mentioned in above
278	Level Transmitter (For Hi-Lo cut-off & alarms)
279	SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display.
280	Electro magnetic flow meter
281	SITC of CE/UL certified 400 mm dia Electro magnetic flow meter suitable to measure 0 to 40 MLD flow to be fitted in 400 mm dia main header line.
282	E.O.T. Crane
283	SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block.
284	Chequerred plate and guards
285	SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm.
286	PAINTING
287	Painting of all pumps piping and valves with two coat enamel paint.
288	LIGHT WIRING & Electrification
289	Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan
290	Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan
291	MPS Campus with Solar Panel and LED Light of 4 sets.
292	D.G. SET AND ACCESSORIES
293	SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing suitable capacity in kVA as per combined load of STP, MPS & Cotreatment Plant with 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. - 1 Set (Included in STP costing)
294	SITC of PLC Based Auto main failure (AMF) Panel for above DG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect. 1 Set (Included in STP costing)
295	Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. 02 Job (Included in STP costing)
296	Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. 02 Job (Included in STP costing)
297	Supply & Laying 50 mm X 6mm size GI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. 40 Meter (Included in STP costing)
298	Providing and Laying cable for DG Set to Panel 400 sq mm X 3.5 core x 2 run( armored aluminium ) - 50 Meter (Included in STP costing)
299	Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 400 sq mm. - 08 Jobs (Included in STP costing)
300	SCREENS AND GATES:
301	Rising type thimble mounted CI Sluice Gates of reputed make at MPS
302	Multirake type Stainless steel ( SS-304), Mechanical Coarse Bar Screen-20 mm gaping), Ultrasonic type differential level sensor, control panel for coarse bar screens, belt coveyor etc. complete in all respect
303	Stainless steel Manual Screen (20 mm gaping), bar size- 50 mm x 10 mm, with stainless steel punji
304	Packing and Frieght
305	Installation, Testing and Commissioning
306	AUTOMATION OF MPS
307	CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places.
308	GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
309	CE/UL certified intellignet Smart Energy Meter
310	Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1)160 AMP rating
311	Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator.
312	CE/UL Certified Surge protector for control panel.
313	CE/UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters.
314	Security Survillance IP Camera with recorder
315	Installation, commissiong & testing of above automation work
316	Trial run of automation work for 3 month period for MPS
317	Three month Expenditure on Operator (MPS) in 3 Shift
318	Diesel Consumption During Trial and Run Period (MPS + STP) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Services Tenders

Surveys Tenders

Survey Works Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Investigation And Survey (On Gis Basis) Of The Project Area Including Soil Investigation, Engineering Design (Hydraulic And Structural) As Required, Procurement Of All Labour & Material, T&P Etc. And Construction Of Various Components Comp, Najibabad-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Investigation And Survey (On Gis Basis) Of The Project Area Including Soil Investigation, Engineering Design (Hydraulic And Structural) As Required, Procurement Of All Labour & Material, T&P Etc. And Construction Of Various Components Comp, Najibabad-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us