|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Stonework in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1cement : 6 coarse sand)including pointing with cement mortar1:2 (1white cement : 2 stone dust ) with an admixture of pigment matching the stone shade One face dressed Red sand stone |
| 5 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black,Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 6 | TYPE- A Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2.2 mm thick SS(stainless steel)-304 grade sheet having size 0.90x1.05meter, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type- III of ASTM-D-4956-01 as approved by Engineer-in charge, letters, borders etc. as per IRC : 67-2001 with approved colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 fixing with SS-304 50.8mm including making holes in pipes, flats/ conduit pipes having height total 2.70 i/c 0.45 embedded below ground level and 1.50m above ground level, providing & fixing SS-304 stainless steel plate of required size including all leads and lifts etc. complete as per drawing, specification and direction of Engineer--in-charge. |
| 7 | TYPE - B Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2.2 mm thick SS(stainless steel)-304 grade sheet having size 0.75x1.05 meter, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type- III of ASTM-D-4956-01 as approved by Engineer-in charge, letters, borders etc. as per IRC : 67-2001 with approved colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 fixing with SS-304 50.8mm including making holes in pipes, flats/ conduit pipes having height total 2.20m i/c 0.45 embedded below ground level and 1.50m above ground level, providing & fixing SS-304 stainless steel plate of required size including all leads and lifts etc. complete as per drawing, specification and direction of Engineer--in-charge. |
| 8 | TYPE - C Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2.2 mm thick stainless steel- 304 grade sheet having size 0.60x0.90 meter, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type- III of ASTM-D- 4956-01 as approved by Engineer- in charge, letters, borders etc. as per IRC : 67-2001 with approved colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class- II of ASTM-D4956-01 fixing with SS-304 50.8mm including making holes in pipes, flats/ conduit pipes having height total 1.95 i/c 0.45 embedded below ground level and 1.50 m above ground level, providing & fixing SS-304 stainless steel plate of required size including all leads and lifts etc. complete as per drawing, specification and direction of Engineer in charge. Please Enable Macros to View BoQ information |
